FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[div_859]

Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM42))
Preparing to start flash mode;
Preparing to open COM42
Connecting;
Downloading DA;
Initializing;
Rid: 66ffae6c4b0bf6930d6a4d10044ac3f9
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM43;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D323645 0xC3DE0342 0x83A4C2CC [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 0?8>50-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x127000000 SIZE: 0x27BD80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

With other tools phone stuck in log or supported API: 3 problem

But with furious gold box is supported even if it's not in the list trust

support

[chipscell25]

ALTICE S70 FRP DONE
Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM20))
Preparing to start flash mode;
Preparing to open COM20
Connecting;
Downloading DA;
Initializing;
Rid: 16fe40e6834557edfe8ecc47e3f15896
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem62.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM14;
DEVICE INFO:
BB CHIP: MT6750 [CB00, 01, 6750, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333145 0xE51E0D42 0xB184E6D0 [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 357581-08-018746-9
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x12F800000 SIZE: 0x270AFBE00


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_21_06_2018_15_42_12.txt

[jseyedanas]

5025D-ALWE1 FLASH FIRMWARE
FURIOUS GOLD-OT SMART(PACK 6)

DOWNLOADING FIRMWARE
OPEN MAINTANCE >>>GO TO SUPPORT AREA>>>DOWNLOADABLE FILES>>>ALCATEL>>>PACK 6>>>SELECT THE MODEL N DOWNLOAD

OPEN OT SMART
WRITE FIRMWARE>>>>>>>>>>>SELECT FILE AND MODEL N CONNECT THE PHONE IN POWER OFF MODE >>>PRES CONNECT


************************************************** **
LOG BELOW
************************************************** *****

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM40))
Preparing to start flash mode;
Preparing to open COM40
Connecting;
Downloading DA;
Initializing;
Rid: 8dfcae1b849c7b881b189a68218fc99b
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem138.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM64;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x51000115 0x4D533237 0x2A950042 0x7F82E29B [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 351506-07-085168-9
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5025D-2BALWE1
USRDATA INFO: 0x9B000000 SIZE: 0x133480000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:09:26

Log file saved to: LOG_22_06_2018_18_59_38.txt

[shahid41]

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (USB Composite Device)
Preparing to enter download mode;
Preparing to open COM10
Connecting;
Init;
Port opened;
Phone detected (Android HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM63
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD size 14.7 GB

IMEI: 01465000447136-9
PTH: 08
PTS: B6G
PROV_ID: 5056N-2ATBUS7
SBTADDR: 24:0D:C2:83:35:1D
SWIFIADDR: 24:0D:C2:99:ED:6C
HS_PN: SAA1F5BWA10C
SSN: N6KB11CQLNZ01SV

Bruteforcing data; This operation can take up to 30 minutes !!!
Done;
Work id: 072C8FAB
Done;
Stype: 00000001
SECURITY: XUB0UP02BR10 Size: 000002C3
Backup saved to: 01465000447136-9
Unlocking;
SIM_LOCK REMOVED !

[Unlocker AL]

wiko Lenny 2 Plus unlocked ok

[..::GMSR::..]

FRP Reset

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MTK USB Port (COM41))
Preparing to start flash mode;
Preparing to open COM41
Connecting;
Downloading DA;
Initializing;
Rid: 79bfc030578e0c2514b0a3b44bb791b7
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem93.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM42;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xFDC90142 0xC914FDB2 [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xCA000000 SIZE: 0x106F80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00









Read Device Memory

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM16))
Preparing to start flash mode;
Preparing to open COM16
Connecting;
Downloading DA;
Initializing;
Rid: b957b458cb8b092b385722dfe47d26de
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D323238 0x9F790042 0x1193409A [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xC3800000 SIZE: 0x2DF580000


Getting partitions info;
Reading info;
Partitions info:
[0x00080000-0x00300000]-[proinfo]
[0x00380000-0x00500000]-[nvram]
[0x00880000-0x00A00000]-[protect1]
[0x01280000-0x00A00000]-[protect2]
[0x01C80000-0x00040000]-[seccfg]
[0x01CC0000-0x00060000]-[lk]
[0x01D20000-0x01000000]-[boot]
[0x02D20000-0x01000000]-[recovery]
[0x03D20000-0x00080000]-[para]
[0x03DA0000-0x00800000]-[logo]
[0x045A0000-0x00A00000]-[expdb]
[0x04FA0000-0x00100000]-[frp]
[0x050A0000-0x02000000]-[nvdata]
[0x070A0000-0x02760000]-[metadata]
[0x09800000-0x00200000]-[oemkeystore]
[0x09A00000-0x00600000]-[secro]
[0x0A000000-0x00800000]-[keystore]
[0x0A800000-0xA9000000]-[system]
[0xB3800000-0x10000000]-[cache]
[0xC3800000-0x2DF580000]-[userdata]
[0x3A2D80000-0x01000000]-[flashinfo]



Reading full dump;
Contents saved to :
C:\Users\Dream\Documents\Android_MTK\firmware_back up\FULL_DUMP_MT6580_EMMC_Hisense_Hisense U989 Pro_6_0_alps-mp-m0_mp1-V2_34_rlk6580_we_c_m.osp

Time needed - 03:37:11

Log file saved to: LOG_26_06_2018_21_27_16.txt



Also read this one by the same model Premio P530 http://forum.gsmhosting.com/vbb/f272...st-fg-2419273/

[ghacks]

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (USB Modem Driver (COM43))
Preparing to start flash mode;
Preparing to open COM43
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 14d7e60877b435af87b2e883f10cae2c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@mtk-usb-all.inf,%mtk_sp_da%;MediaTek DA USB VCOM Port)
TRYING TO OPEN COM45;
DEVICE INFO:
BB CHIP: MT6738 [CB00, 01, 6738, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333145 0xF8920D42 0xAD44C2D4 [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 014858-00-059463-5
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5085C-2ARKUS3
USRDATA INFO: 0x14E800000 SIZE: 0x251AFBE00



Searching data;


Locked to [SIM1]: 310-15
code_cat_n: 4343764482226253 enabled: yes tries: 6
code_cat_ns: 4343764482226253 enabled: no tries: 0
code_cat_sp: 4343764482226253 enabled: no tries: 0
code_cat_c: 4343764482226253 enabled: no tries: 0
code_cat_sim: 4343764482226253 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:05

Log file saved to: LOG_26_06_2018_23_17_25.txt

[tomelich]

where other tools fail
L03C63B102

FuriousGold wins
[IMG] delete account[/IMG]

[ThePhoneTechDoc]

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM6))
Preparing to start flash mode;
Preparing to open COM6
Connecting;
Downloading DA;
Initializing;
Rid: 1cd73e3bed38a12d94769788eb79767d
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xBD390142 0x2BA4D4CE [SIZE=0x1D2880000]
IMEI1 [OTP 0001]: 01XX16-00-XX53XX-1
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5044A-2DC9JMD
USRDATA INFO: 0xBF800000 SIZE: 0x10EC00000



Searching data;


Locked to [SIM1]: 338-05
code_cat_n: 2808656477858240 enabled: yes tries: 10
code_cat_ns: 4816014444402960 enabled: no tries: 10
code_cat_sp: 7909087531875968 enabled: no tries: 10
code_cat_c: 0486644688736998 enabled: no tries: 10
code_cat_sim: 3345509836439650 enabled: no tries: 10
code_cat_ns_sp: 6833565651910903 enabled: no tries: 5
code_cat_sim_c: 9858246137720504 enabled: no tries: 5

Code reading finished; Remove battery and cable;

Time needed - 00:00:10

[IM8]

Frp done by otsmart select zte blade a410

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM120))
Preparing to start flash mode;
Preparing to open COM120
Connecting;
Downloading DA;
Initializing;
Rid: 8faf25bdacd8f557228a98d482f859a1
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem216.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM121;
DEVICE INFO:
BB CHIP: MT6753_S00 [CA00, 00, 337, FF]
HW_STORAGE_EMMC: 0x52000115 0x41423133 0x50450642 0x35829ADC [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA4000000 SIZE: 0x2FED80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

[fokal2008]

ALCATEL OT4055U FLASHING DONE BY FURIOUSGOLD PACK6

[fokal2008]

OT-4055U FRP RESET DONE

[gile@gile]

Read backup
Using library Brom_DLL_v5.1316.1
EMI Settings Loaded;
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM171))
Preparing to start flash mode;
Requesting authorization;
Done;
Connecting;
Downloading DA;
Initializing;
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6260_S0000 [CB00, 00, 6260, 05]
MEMORY: [MXIC] MX25U12835FZNI_10G [C2:25:38] [SIZE=0x01000000]
FAT INFO: 0x00900000 SIZE: 0x00700000
IMEI1 [OTP]: 861244-03-242972-4
IMEI2 [OTP]: 861244-03-242973-2


Reading data;
Done;
Contents saved to :C:\FURIOUS BOX\OTZFlasher_v1.0.0.1643\2012D MEMORY_DUMP_01000000.otz

Time needed - 00:01:03
---------------------------------------------------------------
Flash firmware done
Using library Brom_DLL_v5.1316.1
EMI Settings Loaded;
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM171))
Preparing to start flash mode;
Requesting authorization;
Done;
Connecting;
Downloading DA;
Initializing;
Requesting baudrate change;
Done;
DEVICE INFO:
BB CHIP: MT6260_S0000 [CB00, 00, 6260, 05]
MEMORY: [MXIC] MX25U12835FZNI_10G [C2:25:38] [SIZE=0x01000000]
FAT INFO: 0x00900000 SIZE: 0x00700000
IMEI1 [OTP]: 861244-03-242972-4
IMEI2 [OTP]: 861244-03-242973-2


Loading the file ...
Cfg done ...
File contents to write:
[70006600-70009B07] ARM_BL
[FFFFFFFF-00000406] ROOT_CERT
[10005800-1000F173] ARM_EXT_BL
[10BBC498-10BBCE43] SECURE_RO_ME
[10030000-1038230B] PRIMARY_MAUI
[1038270C-107D87B3] VIVA
Downloading bootloader...
Done;
Pre-formatting code area..
Done;
Downloading images...
Done;
Done;
Done;
Done;
Formatting file system now...
Done;

Time needed - 00:01:40

[SkyMobile05]

unlock MTN Smart s810 don thank you furious team

Searching phone;
Phone detected (@oem175.inf,%vcom_preloader%;MediaTek PreLoader USB VCOM (Android))
Preparing to start meta mode;
Searching for debug port; (be sure drivers from support were installed)
Debug Port found on MediaTek USB VCOM (Android) (COM108);
Preparing to connect meta mode;
Meta mode entered;
Baseband Chip: MT6580B, E00
Sw version: MOLY.WR8.W1449.MD.WG.MP.V57.P2
Hw Version: HEXING6580_WE_M_HSPA_HW
Reading phone info;
IMEI: 35xxxx-xx-xxxxxx-x
Reading simlock info;


Locked to: 616-03
code_cat_n: 78563412 enabled: yes tries: 5
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 5
code_cat_c: 33334444 enabled: no tries: 5
code_cat_sim: 55556666 enabled: no tries: 5
code_cat_ns_sp: 77778888 enabled: no tries: 5
code_cat_sim_c: 99990000 enabled: no tries: 5

Time needed - 00:01:01

Log file saved to: LOG_29_06_2018_19_38_38.txt

[ThePhoneTechDoc]

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MediaTek USB Port (COM12))
Preparing to start flash mode;
Preparing to open COM12
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 0b7512aa04e67326804a823ba6115815
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem59.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM7;
DEVICE INFO:
BB CHIP: MT6738 [CB00, 01, 6738, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333158 0x16CD0742 0x0D3532D4 [SIZE=0x748800000]
IMEI1 [OTP 0001]: 01XX76-00-XX612X-7
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5049W-2ATBUS1
USRDATA INFO: 0x120000000 SIZE: 0x6240FBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:14:22
Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:14:29