JAZZ DIGIT FIXE 0 key - GSM-Forum

TauheedMobiles · 08-25-2021, 08:32

https://forum.gsmhosting.com/vbb/f272/

Choose 'Write Firmware' from the operation box and use JAZZ_DIGIT_4G_TO_KAIOS_2.5.2_0_KEY_FIX_FIRMWARE.os p from the support area

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM5
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 01469cb83c23047f3ee3d6d83b6219ef
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I=
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00

Preparing to write BOOT;
Writing BOOT;
Preparing to write BOOT_PARA;
Writing BOOT_PARA;
Preparing to write MCUPMFW;
Writing MCUPMFW;
Preparing to write MD1DSP;
Writing MD1DSP;
Preparing to write MD1IMG;
Writing MD1IMG;
Preparing to write NVCFG;
Writing NVCFG;
Preparing to write NVDATA;
Writing NVDATA;
Preparing to write NVRAM;
Writing NVRAM;
Preparing to write PARA;
Writing PARA;
Preparing to write PROINFO;
Writing PROINFO;
Preparing to write RECOVERY;
Writing RECOVERY;
Preparing to write SYSTEM;
Writing SYSTEM;
Searching data;
Done;
Success;

Time needed - 00:04:16

DONE

After Flash Unlock it again Every thing will be DONE

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM5
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 01469cb83c23047f3ee3d6d83b6219ef
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I=
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00

Searching data;
File not found;
Calculating;

Performing extended unlock;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:18

Log file saved to: LOG_25_08_2021_11_25_57.txt

Gsm Unkown · 08-25-2021, 11:33

hi can you share firmware read with fg box

TauheedMobiles · 08-25-2021, 11:37

Quote:

Originally Posted by Gsm Unkown

hi can you share firmware read with fg box

JAZZ_DIGIT_4G_TO_KAIOS_2.5.2_0_KEY_FIX_FIRMWARE.os p from the support area

Gsm Unkown · 08-25-2021, 15:57

Quote:

Originally Posted by TauheedMobiles

JAZZ_DIGIT_4G_TO_KAIOS_2.5.2_0_KEY_FIX_FIRMWARE.os p from the support area

brother alredy try this firmware
but phone still dead.
can you read firmware with our box and share link here please

**.:hack3r2k:.** · 08-25-2021, 21:48

Quote:

Originally Posted by Gsm Unkown

brother alredy try this firmware
but phone still dead.
can you read firmware with our box and share link here please

You talk b****/ That firmware works as long the phone powers on

Br

Gsm Unkown · 08-26-2021, 06:19

furious support download all jaz firmware and try one by one but phone does not power on.
maybe readed firmware with furious gold work with my phone.

i unlock with fg box but phone surching .so i flash with downgrad firmware after flash phone dead.

cmaster · 08-27-2021, 07:11

Quote:

Originally Posted by TauheedMobiles

https://forum.gsmhosting.com/vbb/f272/

Choose 'Write Firmware' from the operation box and use JAZZ_DIGIT_4G_TO_KAIOS_2.5.2_0_KEY_FIX_FIRMWARE.os p from the support area

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM5
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 01469cb83c23047f3ee3d6d83b6219ef
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I=
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00

Preparing to write BOOT;
Writing BOOT;
Preparing to write BOOT_PARA;
Writing BOOT_PARA;
Preparing to write MCUPMFW;
Writing MCUPMFW;
Preparing to write MD1DSP;
Writing MD1DSP;
Preparing to write MD1IMG;
Writing MD1IMG;
Preparing to write NVCFG;
Writing NVCFG;
Preparing to write NVDATA;
Writing NVDATA;
Preparing to write NVRAM;
Writing NVRAM;
Preparing to write PARA;
Writing PARA;
Preparing to write PROINFO;
Writing PROINFO;
Preparing to write RECOVERY;
Writing RECOVERY;
Preparing to write SYSTEM;
Writing SYSTEM;
Searching data;
Done;
Success;

Time needed - 00:04:16

DONE

After Flash Unlock it again Every thing will be DONE

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM5
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 01469cb83c23047f3ee3d6d83b6219ef
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I=
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00

Searching data;
File not found;
Calculating;

Performing extended unlock;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:18

Log file saved to: LOG_25_08_2021_11_25_57.txt

You must restore original imei becuase with write of this firmware phone have different imei so it is must to restore original imei.

cmaster

rashid48581 · 08-27-2021, 07:13

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5405
Searching phone in normal mode;
[connect the phone powered off with "0" key pressed to the usb cable]
Phone detected (MediaTek USB Port (COM96)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM96
Device hw code: 0699
Device hw sub code: 8A00
Device hw version: CB00
Device sw version: 0002
Device secure boot: True
Device serial link authorization: False
Device download agent authorization: True
Disabling watchdog timer;
Done;
Exploited;
Sec code uploaded;
Executed;
Vodka time;
Ready to party;
Connecting;
Downloading DA;
Initializing;
Rid: 2668f9c4a53805381fb9e6fe250df427
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
BB ID: NDk1MkJCRDQxRDQzRkJDNUU3M0Y2RUYwNTM1Qz*****=
HW_STORAGE_EMMC: 0x504E01FE 0x34394A31 0xA94D124D 0xF3C36EAB [SIZE=0xE9B00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xA3000000 SIZE: 0x42CFBE00

SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder

Searching data;
File not found;
Calculating;

Performing extended unlock;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:12

Log file saved to: LOG_27_08_2021_11_09_49.txt

thanx

cmaster · 08-27-2021, 07:23

Do not forget to restore original imei

cmaster

08-25-2021, 08:32	#1 (permalink)
TauheedMobiles Freak Poster Join Date: Jun 2014 Location: Pakistan Posts: 111 Member: 2206874 Status: Offline Sonork: 100.1584591 Thanks Meter: 36	JAZZ DIGIT FIXE 0 key https://forum.gsmhosting.com/vbb/f272/ Choose 'Write Firmware' from the operation box and use JAZZ_DIGIT_4G_TO_KAIOS_2.5.2_0_KEY_FIX_FIRMWARE.os p from the support area Using library Brom_DLL_v7.1813.3 Engine version 1.0.0.5405 Searching phone in normal mode; [connect the phone powered off with "0" key pressed to the usb cable] Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0) Preparing to start flash mode; Preparing to open COM5 Device hw code: 0699 Device hw sub code: 8A00 Device hw version: CB00 Device sw version: 0002 Device secure boot: True Device serial link authorization: False Device download agent authorization: True Disabling watchdog timer; Done; Exploited; Sec code uploaded; Executed; Vodka time; Ready to party; Connecting; Downloading DA; Initializing; Rid: 01469cb83c23047f3ee3d6d83b6219ef Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6739 [CB00, 02, 6739, 00] BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I= HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00 Preparing to write BOOT; Writing BOOT; Preparing to write BOOT_PARA; Writing BOOT_PARA; Preparing to write MCUPMFW; Writing MCUPMFW; Preparing to write MD1DSP; Writing MD1DSP; Preparing to write MD1IMG; Writing MD1IMG; Preparing to write NVCFG; Writing NVCFG; Preparing to write NVDATA; Writing NVDATA; Preparing to write NVRAM; Writing NVRAM; Preparing to write PARA; Writing PARA; Preparing to write PROINFO; Writing PROINFO; Preparing to write RECOVERY; Writing RECOVERY; Preparing to write SYSTEM; Writing SYSTEM; Searching data; Done; Success; Time needed - 00:04:16 DONE After Flash Unlock it again Every thing will be DONE Using library Brom_DLL_v7.1813.3 Engine version 1.0.0.5405 Searching phone in normal mode; [connect the phone powered off with "0" key pressed to the usb cable] Phone detected (MediaTek USB Port_V1632 (COM5)) (Driver version: 3.0.1504.0) Preparing to start flash mode; Preparing to open COM5 Device hw code: 0699 Device hw sub code: 8A00 Device hw version: CB00 Device sw version: 0002 Device secure boot: True Device serial link authorization: False Device download agent authorization: True Disabling watchdog timer; Done; Exploited; Sec code uploaded; Executed; Vodka time; Ready to party; Connecting; Downloading DA; Initializing; Rid: 01469cb83c23047f3ee3d6d83b6219ef Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6739 [CB00, 02, 6739, 00] BB ID: NTg1MzI4Q0FDMEZFQUYyQjdFM0I1NEZDODA3RDA1N0I= HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD30E0242 0xED828C55 [SIZE=0xE9880000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0xA3000000 SIZE: 0x424FBE00 Searching data; File not found; Calculating; Performing extended unlock; Phone unlocked; Remove battery and cable; Time needed - 00:00:18 Log file saved to: LOG_25_08_2021_11_25_57.txt Last edited by TauheedMobiles; 08-25-2021 at 08:40.

08-25-2021, 11:33	#2 (permalink)
Gsm Unkown Freak Poster Join Date: Aug 2015 Posts: 403 Member: 2439409 Status: Offline Thanks Meter: 104	hi can you share firmware read with fg box

08-26-2021, 06:19	#6 (permalink)
Gsm Unkown Freak Poster Join Date: Aug 2015 Posts: 403 Member: 2439409 Status: Offline Thanks Meter: 104	furious support download all jaz firmware and try one by one but phone does not power on. maybe readed firmware with furious gold work with my phone. i unlock with fg box but phone surching .so i flash with downgrad firmware after flash phone dead.

08-27-2021, 07:13	#8 (permalink)
rashid48581 Freak Poster Join Date: Dec 2017 Posts: 494 Member: 2792776 Status: Offline Sonork: 1577835 Thanks Meter: 82	Using library Brom_DLL_v7.1813.3 Engine version 1.0.0.5405 Searching phone in normal mode; [connect the phone powered off with "0" key pressed to the usb cable] Phone detected (MediaTek USB Port (COM96)) (Driver version: 3.2.0.0) Preparing to start flash mode; Preparing to open COM96 Device hw code: 0699 Device hw sub code: 8A00 Device hw version: CB00 Device sw version: 0002 Device secure boot: True Device serial link authorization: False Device download agent authorization: True Disabling watchdog timer; Done; Exploited; Sec code uploaded; Executed; Vodka time; Ready to party; Connecting; Downloading DA; Initializing; Rid: 2668f9c4a53805381fb9e6fe250df427 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED DEVICE INFO: BB CHIP: MT6739 [CB00, 02, 6739, 00] BB ID: NDk1MkJCRDQxRDQzRkJDNUU3M0Y2RUYwNTM1Qz*****= HW_STORAGE_EMMC: 0x504E01FE 0x34394A31 0xA94D124D 0xF3C36EAB [SIZE=0xE9B00000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0xA3000000 SIZE: 0x42CFBE00 SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones. As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder Searching data; File not found; Calculating; Performing extended unlock; Phone unlocked; Remove battery and cable; Time needed - 00:00:12 Log file saved to: LOG_27_08_2021_11_09_49.txt thanx

08-27-2021, 07:23	#9 (permalink)
cmaster Freak Poster Join Date: Jun 2006 Location: Pendora Age: 45 Posts: 289 Member: 299122 Status: Offline Sonork: 1658277 Thanks Meter: 54	Do not forget to restore original imei cmaster