Megafon SP-AI - GSM-Forum

iusalmprim · 05-02-2013, 06:46

FG, please, add in your support Megafon SP-AI.

**.:hack3r2k:.** · 05-02-2013, 13:50

Quote:

Originally Posted by iusalmprim

FG, please, add in your support Megafon SP-AI.

Minifon slim sesnseyt m2_RESTORE_AND_UNLOCK.bin on support

Br

iusalmprim · 05-02-2013, 14:34

CPU is broadcom 21654. minifom have infenion cpu.

**.:hack3r2k:.** · 05-02-2013, 15:41

Quote:

Originally Posted by iusalmprim

CPU is broadcom 21654. minifom have infenion cpu.

Contact me on skype pls

Br

Kostil · 05-10-2013, 18:54

this phone is support?

asius · 05-22-2013, 05:19

1. Download archive with the firmware
2. Unpack this firmware to the root of drive C: \ login (my example - E: \ login)
2. In the images folder replace the file on the file simlockgen.img (2.34 MB) Number of downloads: 474

2. In the same folder in the file replace imei.txt last 15 digits - 004402160012344004402160012344 to your (currently under the cap, or * # 06 #)
3. Turn off this unit, take out the battery (battery).
4. Open Device Manager (Properties on "my computer" - Device Manager)
5. Connect the device to USB (cable) (without battery)
6. Insert the battery, we have time to catch the moment of installation of the new device (a new device (not known - most likely), right-click on it to "update" to perform "search for drivers", "select the driver .." "Have Disk." Specifying path of the driver - (C: \ login \ drivers \ bcmvcp.inf.)
7. Once installed, look at what "com" port is assigned a new device (com1, com2, com3, etc.)
8. Take out the battery.
9. Run the flashtool (C: \ login \ flashtool \ FlashTool.exe)
10. We go into a single menu item from the top.
11. In DIAG1 choose its number "com'x '" Port of paragraph 7.
12. Click OK, the left will be a button "?", Click. Will be written on the left-Ready-.
13. Insert the battery (on the body is connected to your computer)
14. Port1 is lit in green, went firmware
15. Upon completion dump the battery ("ok")
16. Run the machine on the left Simcoe (not required!)
17. We enter the unlock code 191519373892

Kostil · 05-25-2013, 21:00

Quote:

Originally Posted by asius

1. Download archive with the firmware
2. Unpack this firmware to the root of drive C: \ login (my example - E: \ login)
2. In the images folder replace the file on the file simlockgen.img (2.34 MB) Number of downloads: 474

2. In the same folder in the file replace imei.txt last 15 digits - 004402160012344004402160012344 to your (currently under the cap, or * # 06 #)
3. Turn off this unit, take out the battery (battery).
4. Open Device Manager (Properties on "my computer" - Device Manager)
5. Connect the device to USB (cable) (without battery)
6. Insert the battery, we have time to catch the moment of installation of the new device (a new device (not known - most likely), right-click on it to "update" to perform "search for drivers", "select the driver .." "Have Disk." Specifying path of the driver - (C: \ login \ drivers \ bcmvcp.inf.)
7. Once installed, look at what "com" port is assigned a new device (com1, com2, com3, etc.)
8. Take out the battery.
9. Run the flashtool (C: \ login \ flashtool \ FlashTool.exe)
10. We go into a single menu item from the top.
11. In DIAG1 choose its number "com'x '" Port of paragraph 7.
12. Click OK, the left will be a button "?", Click. Will be written on the left-Ready-.
13. Insert the battery (on the body is connected to your computer)
14. Port1 is lit in green, went firmware
15. Upon completion dump the battery ("ok")
16. Run the machine on the left Simcoe (not required!)
17. We enter the unlock code 191519373892

New model: Megafon clone

With imei: 004402160012344

Kostil · 05-25-2013, 21:23

Its Yuke A730 for Russia with one simcard.
Yuke A730: A730 smart phone - Shenzhen Yuke Digital Co.,Ltd ? China Smart phone supplier?Android ?4.0 5.0 inch?3G?MTK6577?Qualcomm chipsets?Capacitive touch screen?Dual SIM?China Smart phone manufacturer
Megafon login (Megafon sp-a1, Megafon sp-ai) foto:

Kostil · 05-25-2013, 21:54

Quote:

Originally Posted by Kostil

Its Yuke A730 for Russia with one simcard.
Yuke A730: A730 smart phone - Shenzhen Yuke Digital Co.,Ltd ? China Smart phone supplier?Android ?4.0 5.0 inch?3G?MTK6577?Qualcomm chipsets?Capacitive touch screen?Dual SIM?China Smart phone manufacturer
Megafon login (Megafon sp-a1, Megafon sp-ai) foto:

Megafon login (Megafon sp-a1, Megafon sp-ai) foto:

**.:hack3r2k:.** · 05-26-2013, 09:28

We will add real support soon

Br;()

iusalmprim · 06-01-2013, 12:29

thank asius. FG- you sleep. Already exist free solution.

**.:hack3r2k:.** · 06-01-2013, 12:51

Quote:

Originally Posted by iusalmprim

thank asius. FG- you sleep. Already exist free solution.

It changes the imei so i wouldnt call it a solution

Br

Kostil · 06-05-2013, 22:31

This file makes the right imei. Insert file in folder "images" with firmware. Run file and write factory imei

galijus · 06-06-2013, 12:32

Thanks to this nice people(Kostil,iusalmprim,asius),my set(this one have one sim card),it is successfully unlocked with this procedure and have now original imei

Thanks once again.Regards

Unlocker_001 · 07-21-2013, 09:36

Quote:

Originally Posted by asius

1. Download archive with the firmware
2. Unpack this firmware to the root of drive C: \ login (my example - E: \ login)
2. In the images folder replace the file on the file simlockgen.img (2.34 MB) Number of downloads: 474

2. In the same folder in the file replace imei.txt last 15 digits - 004402160012344004402160012344 to your (currently under the cap, or * # 06 #)
3. Turn off this unit, take out the battery (battery).
4. Open Device Manager (Properties on "my computer" - Device Manager)
5. Connect the device to USB (cable) (without battery)
6. Insert the battery, we have time to catch the moment of installation of the new device (a new device (not known - most likely), right-click on it to "update" to perform "search for drivers", "select the driver .." "Have Disk." Specifying path of the driver - (C: \ login \ drivers \ bcmvcp.inf.)
7. Once installed, look at what "com" port is assigned a new device (com1, com2, com3, etc.)
8. Take out the battery.
9. Run the flashtool (C: \ login \ flashtool \ FlashTool.exe)
10. We go into a single menu item from the top.
11. In DIAG1 choose its number "com'x '" Port of paragraph 7.
12. Click OK, the left will be a button "?", Click. Will be written on the left-Ready-.
13. Insert the battery (on the body is connected to your computer)
14. Port1 is lit in green, went firmware
15. Upon completion dump the battery ("ok")
16. Run the machine on the left Simcoe (not required!)
17. We enter the unlock code 191519373892

1PCS UNLOCK DONE BY THIS METHOD ! THANKS !Hope Furious will add this model soon !

05-02-2013, 06:46	#1 (permalink)
iusalmprim Freak Poster Join Date: Mar 2007 Location: MOLDOVA Posts: 136 Member: 463189 Status: Offline Thanks Meter: 10	Megafon SP-AI FG, please, add in your support Megafon SP-AI.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-10-2013, 18:54	#5 (permalink)
Kostil Junior Member Join Date: Nov 2010 Posts: 22 Member: 1450689 Status: Offline Sonork: 100.1627125 Thanks Meter: 6	this phone is support?

05-22-2013, 05:19	#6 (permalink)
asius Insane Poster Join Date: Dec 2008 Location: Uzbekistan Posts: 67 Member: 920690 Status: Offline Sonork: 123456 Thanks Meter: 14	1. Download archive with the firmware 2. Unpack this firmware to the root of drive C: \ login (my example - E: \ login) 2. In the images folder replace the file on the file simlockgen.img (2.34 MB) Number of downloads: 474 2. In the same folder in the file replace imei.txt last 15 digits - 004402160012344004402160012344 to your (currently under the cap, or * # 06 #) 3. Turn off this unit, take out the battery (battery). 4. Open Device Manager (Properties on "my computer" - Device Manager) 5. Connect the device to USB (cable) (without battery) 6. Insert the battery, we have time to catch the moment of installation of the new device (a new device (not known - most likely), right-click on it to "update" to perform "search for drivers", "select the driver .." "Have Disk." Specifying path of the driver - (C: \ login \ drivers \ bcmvcp.inf.) 7. Once installed, look at what "com" port is assigned a new device (com1, com2, com3, etc.) 8. Take out the battery. 9. Run the flashtool (C: \ login \ flashtool \ FlashTool.exe) 10. We go into a single menu item from the top. 11. In DIAG1 choose its number "com'x '" Port of paragraph 7. 12. Click OK, the left will be a button "?", Click. Will be written on the left-Ready-. 13. Insert the battery (on the body is connected to your computer) 14. Port1 is lit in green, went firmware 15. Upon completion dump the battery ("ok") 16. Run the machine on the left Simcoe (not required!) 17. We enter the unlock code 191519373892

05-25-2013, 21:23	#8 (permalink)
Kostil Junior Member Join Date: Nov 2010 Posts: 22 Member: 1450689 Status: Offline Sonork: 100.1627125 Thanks Meter: 6	Its Yuke A730 for Russia with one simcard. Yuke A730: A730 smart phone - Shenzhen Yuke Digital Co.,Ltd ? China Smart phone supplier?Android ?4.0 5.0 inch?3G?MTK6577?Qualcomm chipsets?Capacitive touch screen?Dual SIM?China Smart phone manufacturer Megafon login (Megafon sp-a1, Megafon sp-ai) foto:

05-26-2013, 09:28	#10 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,976 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,566	We will add real support soon Br;()

06-01-2013, 12:29	#11 (permalink)
iusalmprim Freak Poster Join Date: Mar 2007 Location: MOLDOVA Posts: 136 Member: 463189 Status: Offline Thanks Meter: 10	thank asius. FG- you sleep. Already exist free solution.

06-06-2013, 12:32	#14 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	Thanks to this nice people(Kostil,iusalmprim,asius),my set(this one have one sim card),it is successfully unlocked with this procedure and have now original imei Thanks once again.Regards