OT-5042T Dead after Unlock

[lolo24]

Dear, After unlock procedure phone not power on.

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: e4db09dd4b3059d65291c2eedbf497e3
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem106.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM7;
DEVICE INFO:
BB CHIP: MT6752_S01 [CA01, 01, 6752, 05]
HW_STORAGE_EMMC: 0x51000115 0x41535837 0x122B0142 0xE34238EC [SIZE=0x1D2880000]
IMEI1 [OTP 0001]: 014247-00-177502-3
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5042T-2BTBUS1
USRDATA INFO: 0x6C000000 SIZE: 0x7A6C0000



Searching data;
Done;
Done;

Phone unlocked; Wait until the phone starts and shows charging screen;

Time needed - 00:00:11

Thannks

[asad_nomy7]

use key combination for restart phone in normal mode.Like power+vol down or power+vol up.

[lolo24]

Ive Already tried this before and did not worked.
Solution was write firmware with NCK.

Now phone Unlcoked with furious and flashed with NCK.

best regards.
Luis Manresa

[.:hack3r2k:.]

Originally Posted by lolo24

Ive Already tried this before and did not worked.
Solution was write firmware with NCK.

Now phone Unlcoked with furious and flashed with NCK.

best regards.
Luis Manresa

Our soft flash this model also so i dont understand the problem


Br