please give me code of treo 650 by mistake i format - GSM-Forum

rajan nishchal · 03-17-2012, 17:08

please give me code of treo 650 by mistake i format my dongle and lose treo credits

Unlock Data

Send the unlock data to [email protected]
-- 8< --
777QJT7BVE
5A6IUF7XLS
33LN6HAQL2
NCBHTKLJB6
MM
-- 8< --

fredinho · 03-17-2012, 19:22

Check FAQ, can be unlock using usb cable.

Q: How i read codes from TREO 650 and use them to unlock it ?
A:

Reading Your phones Unlock Codes

1. Run treo read code software
2. remove any card inside in phone
3. Remove Treo Battery Cover & Power on your Treo
4. Connect USB Sync Cable (as supplied with phone)
5. Place Phone in “Test Mode”
- Press and Hold Button on USB Cable
- Using Pen Press and hold for 1 second Reset button in Back of Treo
- Release reset button, then release Active Sync button on Cable
- Display should be red/blue etc and detail boot loader version
- Phone is now in Test Mode
If Windows now detects a new device (this will happen the first time you put a treo 650 into
test mode, then you will need to do the following
(you will only need to do this once)
1. A new hardware wizard will appear. Select “No, not this time” if asked about connecting to the internet
2. Then on the next screen Select “Don’t search, I will choose driver to install.” Click on
the “Have Disc … “ button
3. Select the drivers, direct windows to the folder containing the Treo HTTC drivers, if presented with a Windows warning about Microsoft signing of drivers. Choose “Continue Anyway”
4. Windows will now install the drivers.
5. Click on finish on next screen
6. Windows has finished installing New Hardware .You will only need to do this once per PC.
7. Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds)
Entering Codes
1. Remove Treo battery, unplug cable
2. Insert incorrect SIM card (1 the phone does not accept)
3. Power on Treo-650, “Sim not allowed” is displayed, click “ok”
4. Go to the dial pad, and use the stylus to enter code exactly as displayed in the software. Then press “Dial”
5. Phone will reset and display “sim lock removed”
Phone Unlocked !!!!

03-17-2012, 17:08	#1 (permalink)
rajan nishchal No Life Poster Join Date: Jul 2004 Location: INDIA Age: 43 Posts: 1,803 Member: 75612 Status: Offline Thanks Meter: 1,427	please give me code of treo 650 by mistake i format please give me code of treo 650 by mistake i format my dongle and lose treo credits Unlock Data Send the unlock data to [email protected] -- 8< -- 777QJT7BVE 5A6IUF7XLS 33LN6HAQL2 NCBHTKLJB6 MM -- 8< --

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Deskey Device driver not found" ?? Please help	DivAdonis	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-08-2017 13:21
Help: Forgot my 6110 user lock code!!	GByte9	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	02-26-2016 14:52
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
PIN1/PIN2 CODE	Jon	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	12-26-2012 04:40
need software for 5161 by cable	mln2000	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-29-2010 20:17

03-17-2012, 19:22	#2 (permalink)
fredinho No Life Poster Join Date: Feb 2009 Location: https://jabaunlock.com/ Posts: 1,348 Member: 975275 Status: Offline Sonork: 100.1607001 Thanks Meter: 221	Check FAQ, can be unlock using usb cable. Q: How i read codes from TREO 650 and use them to unlock it ? A: Reading Your phones Unlock Codes 1. Run treo read code software 2. remove any card inside in phone 3. Remove Treo Battery Cover & Power on your Treo 4. Connect USB Sync Cable (as supplied with phone) 5. Place Phone in “Test Mode” - Press and Hold Button on USB Cable - Using Pen Press and hold for 1 second Reset button in Back of Treo - Release reset button, then release Active Sync button on Cable - Display should be red/blue etc and detail boot loader version - Phone is now in Test Mode If Windows now detects a new device (this will happen the first time you put a treo 650 into test mode, then you will need to do the following (you will only need to do this once) 1. A new hardware wizard will appear. Select “No, not this time” if asked about connecting to the internet 2. Then on the next screen Select “Don’t search, I will choose driver to install.” Click on the “Have Disc … “ button 3. Select the drivers, direct windows to the folder containing the Treo HTTC drivers, if presented with a Windows warning about Microsoft signing of drivers. Choose “Continue Anyway” 4. Windows will now install the drivers. 5. Click on finish on next screen 6. Windows has finished installing New Hardware .You will only need to do this once per PC. 7. Now click “Do Job” on SW, (codes should be displayed in under 5 Seconds) Entering Codes 1. Remove Treo battery, unplug cable 2. Insert incorrect SIM card (1 the phone does not accept) 3. Power on Treo-650, “Sim not allowed” is displayed, click “ok” 4. Go to the dial pad, and use the stylus to enter code exactly as displayed in the software. Then press “Dial” 5. Phone will reset and display “sim lock removed” Phone Unlocked !!!!