prblem unlock huawei E160g [SOLVED] - GSM-Forum

xina · 06-13-2009, 15:46

hello, I can not unlock Huawei e160g, gives me this error

Software engine version: 1.0.0.2440
Searching phone ...
MODEL : QCOM SERIES 7
COMPILED DATE : Sep 9 2008 21:37:00
RELEASE DATE : Sep 9 2008 21:37:00
FIRMWARE INFO : 11.608.02.00.00
IMEI : 3593900208xxxxx
BLUETOOTH ADDR : 00 00 00 00 00 00
MEMORY ID : 00EC:0076
MEMORY NAME : SAMSUNG_K9F1208
MEMORY INFO : 0200:0020:0280

UNLOCK INFO
IMEI: 35939002xxxxxxx
NCK: 65109087
UNLOCK STATUS: [OK] OK
LOCK STATUS: [OK] +CME ERROR: operation not allowed
Time needed - 00.00.02

::.imeimate.:: · 06-13-2009, 15:53

never mind mate
just run your dongle under other network exe to put the code
or just put different sim card

luskao · 06-13-2009, 17:22

Sometimes it requires to use a sim from the same operator, if not will not get the correct info

BR

Luskao

xina · 06-13-2009, 17:30

sorry, I did not understand, where do I inder the codes? Just change APN? to make it work with any sim?
when I insert a different sim says sim not supported ..

luskao · 06-14-2009, 09:16

Use an unbranded software to enter the code

http://rapidshare.com/files/16329549...le_Connect.zip

Or send on modem port using a soft like QMAT (www.revskills.de) following at command code:

AT^CARDLOCK="UNLOCK_CODE" where UNLOCK_CODE is the code shown by our sw.

BR

Luskao

xina · 06-17-2009, 15:43

hello I used to be recommended QC COM gives me this error ...
AT^CARDLOCK=65109087 +CME ERROR: operation not allowed
OK

**.:hack3r2k:.** · 06-17-2009, 23:20

Quote:

Originally Posted by xina

hello I used to be recommended QC COM gives me this error ...
AT^CARDLOCK=65109087 +CME ERROR: operation not allowed
OK

Man i think you can read no ?

you must send AT^CARDLOCK="65109087"

Br

xina · 06-18-2009, 15:07

Quote:

Originally Posted by .:hack3r2k:.

Man i think you can read no ?

you must send AT^CARDLOCK="65109087"

Br

http://img199.imageshack.us/i/15062009s.jpg/

http://img199.imageshack.us/i/immaginenxw.jpg/

I did this procedure, you could tell me what procedure should I do?

free1600 · 06-18-2009, 17:15

you need to put the " " .................................................. ..........;

luskao · 06-20-2009, 07:20

No, you must use DIAG PORTS.

BR

Luskao

xina · 06-20-2009, 08:50

I explained as I can, and the procedure and guide for this release and send AT ^ CARDLOCK = "65109087 unlock through QC COM Huawei e160g? I can not, if someone can explain .. thanks!

luskao · 06-20-2009, 08:58

Well then use my method. Just install the unbranded soft from huawei and then insert a non accepted simcard

BR

Luskao

stanner_austin · 06-20-2009, 09:00

Quote:

Originally Posted by xina

I explained as I can, and the procedure and guide for this release and send AT ^ CARDLOCK = "65109087 unlock through QC COM Huawei e160g? I can not, if someone can explain .. thanks!

use qmat and paste this command result.
AT^CARDLOCK?
and
at^cardlock=?

just like to see some results.

**.:hack3r2k:.** · 06-21-2009, 12:12

Quote:

Originally Posted by xina

I explained as I can, and the procedure and guide for this release and send AT ^ CARDLOCK = "65109087 unlock through QC COM Huawei e160g? I can not, if someone can explain .. thanks!

You must send AT ^ CARDLOCK = "65109087"

xina · 06-21-2009, 14:57

Quote:

Originally Posted by .:hack3r2k:.

You must send AT ^ CARDLOCK = "65109087"

still dae these errors when I enter the codes,
the key and marked wind italy,
what would be the door of communication?
I tried to change port and speed

http://it.tinypic.com/r/33oh17m/5

06-13-2009, 15:46	#1 (permalink)
xina No Life Poster Join Date: Jan 2007 Posts: 551 Member: 441775 Status: Offline Thanks Meter: 22	prblem unlock huawei E160g [SOLVED] hello, I can not unlock Huawei e160g, gives me this error Software engine version: 1.0.0.2440 Searching phone ... MODEL : QCOM SERIES 7 COMPILED DATE : Sep 9 2008 21:37:00 RELEASE DATE : Sep 9 2008 21:37:00 FIRMWARE INFO : 11.608.02.00.00 IMEI : 3593900208xxxxx BLUETOOTH ADDR : 00 00 00 00 00 00 MEMORY ID : 00EC:0076 MEMORY NAME : SAMSUNG_K9F1208 MEMORY INFO : 0200:0020:0280 UNLOCK INFO IMEI: 35939002xxxxxxx NCK: 65109087 UNLOCK STATUS: [OK] OK LOCK STATUS: [OK] +CME ERROR: operation not allowed Time needed - 00.00.02

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Please,HELP ME!!!!!!!I cannot unlock Huawei E160G IMEI 354300028512685	Serj_D	Hardware Repair Item Wanted	6	03-21-2010 07:35
Unlock Huawei E160G	m1lo	Phone Unlocking Codes & Maps	4	10-10-2009 16:06
pls help unlock huawei E170 [SOLVED]	Odunukwe Tony	FuriousGold	2	10-07-2009 08:18
huawei e160g usb unlock	madmaxx	KULANKENDI Server	4	12-17-2008 11:03

06-13-2009, 15:53	#2 (permalink)
::.imeimate.:: No Life Poster Join Date: Sep 2005 Location: Melbourne / Australia Age: 47 Posts: 3,426 Member: 177834 Status: Offline Thanks Meter: 1,800	never mind mate just run your dongle under other network exe to put the code or just put different sim card

06-13-2009, 17:22	#3 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Sometimes it requires to use a sim from the same operator, if not will not get the correct info BR Luskao

06-13-2009, 17:30	#4 (permalink)
xina No Life Poster Join Date: Jan 2007 Posts: 551 Member: 441775 Status: Offline Thanks Meter: 22	sorry, I did not understand, where do I inder the codes? Just change APN? to make it work with any sim? when I insert a different sim says sim not supported ..

06-14-2009, 09:16	#5 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Use an unbranded software to enter the code http://rapidshare.com/files/16329549...le_Connect.zip Or send on modem port using a soft like QMAT (www.revskills.de) following at command code: AT^CARDLOCK="UNLOCK_CODE" where UNLOCK_CODE is the code shown by our sw. BR Luskao

06-17-2009, 15:43	#6 (permalink)
xina No Life Poster Join Date: Jan 2007 Posts: 551 Member: 441775 Status: Offline Thanks Meter: 22	hello I used to be recommended QC COM gives me this error ... AT^CARDLOCK=65109087 +CME ERROR: operation not allowed OK

06-18-2009, 17:15	#9 (permalink)
free1600 No Life Poster Join Date: Mar 2007 Location: /Fr/Ch\Ro\ Age: 39 Posts: 1,334 Member: 467911 Status: Offline Thanks Meter: 351	you need to put the " " .................................................. ..........;

06-20-2009, 07:20	#10 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	No, you must use DIAG PORTS. BR Luskao

06-20-2009, 08:50	#11 (permalink)
xina No Life Poster Join Date: Jan 2007 Posts: 551 Member: 441775 Status: Offline Thanks Meter: 22	I explained as I can, and the procedure and guide for this release and send AT ^ CARDLOCK = "65109087 unlock through QC COM Huawei e160g? I can not, if someone can explain .. thanks!

06-20-2009, 08:58	#12 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Well then use my method. Just install the unbranded soft from huawei and then insert a non accepted simcard BR Luskao