Server error again in HAPPY DAY

[jepetu]

Hi supporters,

Please check this weird issue as always in HAPPY DAYS I can't program my packs or work with phones that need Multipurpose credits and have to wait till next day.

My license is valid and active.

Please check.

Thanks u in advance

Connecting to server ...
Authorisation process started ...
Socket Error # 10054
Connection reset by peer.
Time needed - 00:00:02

[cado]

it is already mandatory to pay for a year and them wait for the happy day.

[.:hack3r2k:.]

Originally Posted by jepetu

Hi supporters,

Please check this weird issue as always in HAPPY DAYS I can't program my packs or work with phones that need Multipurpose credits and have to wait till next day.

My license is valid and active.

Please check.

Thanks u in advance

Connecting to server ...
Authorisation process started ...
Socket Error # 10054
Connection reset by peer.
Time needed - 00:00:02

You must use a VPN if you get such error


Br;l)

[jepetu]

Originally Posted by .:hack3r2k:.

You must use a VPN if you get such error


Br;l)

Hi,

As I told you in first post, today HAPPY DAY: OFF and everything is working normal again and no VPN needed.

I realized about the coincidence after various times getting this "HAPPY DAY" error. I think is worth to check it.

Thanks for the reply

Connecting to server ...
Authorisation process started ...
Device ID [SERIAL]: 5Cxxxxxx
Happy Day: OFF
Furious Multipurpose Credits: 2


Visit www.imei.us for the best imei unlock source !

PACK(S) ALLOWED TO UPDATE ON DEVICE: 
PACK 2, PACK 3, PACK 4, PACK 5, PACK 6, PACK 7, PACK 8, PACK 11, PACK 13 

Device space: 640 bytes
Card OS: 111
Erasing device firmware. Please Wait !
E_STAT: 11111111111111111111111
Device space: 46848 bytes
Card OS: 111
Required device space: 46258 bytes
Programming started. Please Wait !
Programmed OK !
Update finished !
Time needed - 00:01:47

[jepetu]

Also can confirm today all is working.

Alcatel 5032W unlocked OK

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM20))
Preparing to start meta mode; 
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip:	MT6765
Sw version:	
Hw Version:	alps-mp-p0.mp1-V5.117_tct.tmo.p0mp1.k39tv1.64.bsp_P32
Baseband Chip:	MT6765
Sw version:	MOLY.LR12A.R3.MP.V66.11.P36
Hw Version:	TK_MD_L4_HW
Reading phone info;
IMEI 1:		01xxxxxx-xx-xxxxxx-x
IMEI 2:		N/A
BB ID: OUMyRUVDRkI3OUYyMTA0OEZGOTNENjc5NDA0MzE0MjQ=
Working;
Connecting to server;
Authorisation process started;

Furious Multipurpose Credits: 2
Done;

Requesting data from server ! Wait please ...

Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:58

Log file saved to: LOG_21_01_2021_04_24_21.txt

[kidiambuta]

i have this error to unlock samsung in pack 12. FG Samsung Module v1.0.5.8
~ SAMSUNG SM-S367VL ~
~ DIRECT UNLOCK ~

Start at 13:06:43

Please power on the phone and connect it to USB in Android Debug Mode!
If the phone ask to allow usb debuging please accept!
Searching for phone; ok
Reading info; ok
BRAND: SAMSUNG
MODEL: SM-S367VL
J3TOPELTETFNVZW
IMEI: 35690509167073
HWID: SAMSUNGEXYNOS7885-5
BOOT LOADER: S367VLUDU1ARG1
COUNTRY CODE: USA US
SALES CODE: TFN
VERSION: ANDROID 8.0.0
BUILD R16NW S367VLUDU1ARG1 (CP)
S367VLUDU1ARG1 S367VLTFN1ARG1 (PDA/CSC)
FIRMWARE: J3TOPELTETFNVZW-USER S367VLUDU1ARG1
HARDWARE: S367VL.04
KERNEL: 4.4.13-13869209 (dpi@21HHAE09) (gcc 4.9.x 20150123 (prerelease) ) #1 SMP PREEMPT Thu Jul 12 18:10:35 KST 2018
FINGERPRINT: SAMSUNG_J3TOPELTETFNVZW_J3TOPELTETFNVZW_8.0.0_R16N W_S367VLUDU1ARG1_USER_RELEASE-KEYS
SECURITY DATE: 2018-07-01
WARRANTY BIT: 0
PHONE SN: 520009E9B45D6517_R28K83329JK
CPU TYPE: EXYNOS5 ARMEABI-V7A
RIL MODEM: SHANNON327
RIL VERSION: SAMSUNG RIL V4.0
SIM STATUS: ABSENT
USB CONFIG: MTP,ADB
DEBUG LEVEL: 0X4F4C
Checking server; ok
Connecting to server; ok
Asking server for access; ok
Sending data to server; ok
Getting data from server; error [ NO ANSWER ]
Disconnecting from server; ok

End at 13:07:18

how to solver this please

[.:hack3r2k:.]

Originally Posted by jepetu

Also can confirm today all is working.

Alcatel 5032W unlocked OK

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM20))
Preparing to start meta mode; 
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip:MT6765
Sw version:
Hw Version:alps-mp-p0.mp1-V5.117_tct.tmo.p0mp1.k39tv1.64.bsp_P32
Baseband Chip:MT6765
Sw version:MOLY.LR12A.R3.MP.V66.11.P36
Hw Version:TK_MD_L4_HW
Reading phone info;
IMEI 1:01xxxxxx-xx-xxxxxx-x
IMEI 2:N/A
BB ID: OUMyRUVDRkI3OUYyMTA0OEZGOTNENjc5NDA0MzE0MjQ=
Working;
Connecting to server;
Authorisation process started;

Furious Multipurpose Credits: 2
Done;

Requesting data from server ! Wait please ...

Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:58

Log file saved to: LOG_21_01_2021_04_24_21.txt

So contact me on skype and will check. But im sure is just a coincidence.

Br


Sent from my iPhone using Tapatalk Pro