Sfr118/ot-2040g

[abumu3ed]

phone is locked

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (SCI USB2Serial)
Preparing to sync; 
Port opened [COM46];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531 FdlStat: 0000
Starting auth;
HW IMEI : 861058-02-036298-0

Memory [CS0]: 00EF:0040:0016 - SIZE : 00400000
Reading phone info;
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: NONE
SW IMEI[1]: NONE
SW IMEI[2]: NONE
SW IMEI[3]: NONE

SIMLOCK FLAG: OFF
FIXED NV BASE: 90000001
Reading NV;
ERROR: NV partition is damaged ! Reflash the phone;

Log file saved to: LOG_20_01_2016_13_22_42.txt


Time needed - 00:00:21

firmware wrinting:

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (SCI USB2Serial)
Preparing to sync; 
Port opened [COM46];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531 FdlStat: 0000
Starting auth;
HW IMEI : 861058-02-036298-0

Memory [CS0]: 00EF:0040:0016 - SIZE : 00400000
Reading phone info;
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: NONE
SW IMEI[1]: NONE
SW IMEI[2]: NONE
SW IMEI[3]: NONE

SIMLOCK FLAG: OFF
FIXED NV BASE: 90000001
Uncompressing;
Done;
Re-programming;
FLS programmed;
Done;

Remove battery and cable;

Log file saved to: LOG_20_01_2016_13_27_42.txt


Time needed - 00:03:46

unlock:

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (SCI USB2Serial)
Preparing to sync; 
Port opened [COM46];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531 FdlStat: 0000
Starting auth;
HW IMEI : 861058-02-036298-0

Memory [CS0]: 00EF:0040:0016 - SIZE : 00400000
Reading phone info;
PHONE INFO: NONE
BT ADDR: NONE
SW IMEI[0]: NONE
SW IMEI[1]: NONE
SW IMEI[2]: NONE
SW IMEI[3]: NONE

SIMLOCK FLAG: OFF
FIXED NV BASE: 90000001
Reading NV;
ERROR: NV partition is damaged ! Reflash the phone;

Log file saved to: LOG_20_01_2016_13_29_17.txt


Time needed - 00:00:21

any help?

[.:hack3r2k:.]

Phone didnt connect properly / old exe used. Power on phone normally power off and retry. Be sure latest version is used

Br

[abumu3ed]

latest EXE other windows.

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (@oem19.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync; 
Port opened [COM23];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531 FdlStat: 0000
Starting auth;
HW IMEI : 861058-02-036298-0

Memory [CS0]: 00EF:0040:0016 - SIZE : 00400000
Reading phone info;
PHONE INFO: 2040G-3ASFFR1
BT ADDR: NONE
SW IMEI[0]: NONE
SW IMEI[1]: NONE
SW IMEI[2]: NONE
SW IMEI[3]: NONE

SIMLOCK FLAG: OFF
FIXED NV BASE: 90000001
Reading NV;
ERROR: NV partition is damaged ! Reflash the phone;

Log file saved to: LOG_20_01_2016_16_18_34.txt


Time needed - 00:00:22

what does it mean "Phone didnt connect properly"?
drivers are installed correctly and software communicates perfectly with phone.

[.:hack3r2k:.]

Read the flash and attach here. After use this code to unlcok it 52824388

[abumu3ed]

code is OK. thanks.

here is dupm

[.:hack3r2k:.]

Originally Posted by abumu3ed

code is OK. thanks.

here is dupm

Please upload it on other place. I cannot connect


Br