zte blade l130 unlock error [SOLVED]

[nessyb]

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem235.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM21];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
ERROR;
PHONE INFO: NONE
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 111111-11-111111-9
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF
Reading NV;


NV saved to : NV_000000-00-000000-0_111111-11-111111-9_96330000_26_11_2019_06_24_36.spd
Gathering security data;
ERROR: SECURITY ERROR ! UNSECURED DEVICES NOT SUPPORTED. USE 'DIAG MODE' TO SERVICE THOSE.

Log file saved to: LOG_26_11_2019_06_24_42.txt


Time needed - 00:02:49

inside phone its listed as
kicka 4 ve nw lock
zte blade l130

so i selected l130 and result error

help me team

with diag

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem235.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM21];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.41.3_P12_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.41.3_P12
HW Version: sc7731e_modem
02-22-2019 12:37:12
Build number: TEL_MX_P731F30V1.0.0B09
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 111111-11-111111-9
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF



BKP saved to : BKP_000000-00-000000-0_111111-11-111111-9_00000000_26_11_2019_06_34_47.spd
SIM_LOCK TYPE: 4
ERROR: Unsupported simlock type !

Log file saved to: LOG_26_11_2019_06_34_48.txt


Time needed - 00:00:03

[nessyb]

ADDED NOTE

phone come bricked with other tool so i wite pac for l130 telcel it was once vodacom

is this the reason its failing to unlock??

[.:hack3r2k:.]

Originally Posted by nessyb

ADDED NOTE

phone come bricked with other tool so i wite pac for l130 telcel it was once vodacom

is this the reason its failing to unlock??

From what i can see security is totally wiped / lost. Honestly can forget fixing it. Its good for trash. Never reflash or do any experiments on these phones. Loosing security area is a permanent brick ! Attach here that BKP saved to see if anything left


Br

[nessyb]

Originally Posted by .:hack3r2k:.

From what i can see security is totally wiped / lost. Honestly can forget fixing it. Its good for trash. Never reflash or do any experiments on these phones. Loosing security area is a permanent brick ! Attach here that BKP saved to see if anything left


Br

i managed to restore original nvram but i realise telcel mexico hardlock their phones

so may you provide me with vodafone kick4 ve based firmware

here is the requested backup before i restore

https://mega.nz/#!adECBSZB!WTdFobDX-...48CHDMXI3uzD8c


HERE IS LOG AFTER NVRAM RESTORE

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem235.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM21];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 861486-04-025725-4
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
Reading NV;


NV saved to : NV_000000-00-000000-0_861486-04-025725-4_96330000_27_11_2019_03_28_51.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Device support is expired ! You need to pay renewal tax or wait for the 'HAPPY DAY' in order to use it. Please contact your reseller !
ERROR: Simlock set error !

Log file saved to: LOG_27_11_2019_03_29_08.txt


Time needed - 00:05:16


AND MY SUPPORT EXPIRED HAHAHA

[.:hack3r2k:.]

Originally Posted by nessyb

i managed to restore original nvram but i realise telcel mexico hardlock their phones

so may you provide me with vodafone kick4 ve based firmware

here is the requested backup before i restore

https://mega.nz/#!adECBSZB!WTdFobDX-...48CHDMXI3uzD8c


HERE IS LOG AFTER NVRAM RESTORE

Searching phone;
For an successful connection do the following:
1. Power on the phone and power it off and leave the battery inside
2. Keep pressed firmly volume DOWN key
3. Insert the usb cable inside the phone while keeping pressed volume DOWN
Phone detected (@oem235.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM21];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Starting auth;
HW IMEI : 000000-00-000000-0

Analysing data; Please WAIT !
OK;
PHONE INFO: NONE
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 861486-04-025725-4
SW IMEI[1]: 867400-02-031662-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON
Reading NV;


NV saved to : NV_000000-00-000000-0_861486-04-025725-4_96330000_27_11_2019_03_28_51.spd
Gathering security data;
Security check result: 0
Connecting to server;
Authorisation process started;
Device support is expired ! You need to pay renewal tax or wait for the 'HAPPY DAY' in order to use it. Please contact your reseller !
ERROR: Simlock set error !

Log file saved to: LOG_27_11_2019_03_29_08.txt


Time needed - 00:05:16


AND MY SUPPORT EXPIRED HAHAHA

Whats your box id ? Theres no hard lock. Unlock will work fine on any fw as long the sec is not touched. `just try again to unlock now ! will be fine

Br


Sent from my iPhone using Tapatalk Pro