Y5 2019 IMEI Repair

[KrzychuG]

So now when saving backup issue seems to be solved i can't repair IMEI.

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM35))
Preparing to start flash mode;
Preparing to open COM35
Connecting;
Downloading DA;
Initializing;
Rid: bcec51b6f54732a203052280d9c3fd7e
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x438F0442 0xD316B8E4 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x255400000



Searching data;
Checking data;

Contents saved to :
F:\_FLASHe\Huawei\AMN-L29\HUAWEI Y5 2019_IMEI_F2FA2E09_854F4D70_bcec51b6f54732a2030522 80d9c3fd7e_4_09_2019_13_06_34.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (MediaTek PreLoader USB VCOM (Android) (COM108))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;

IMEI repair FAILED; Reflash the phone with the firmware from the support and retry;

Time needed - 00:00:58

Log file saved to: LOG_4_09_2019_13_07_31.txt

I already reflashed phone with Amman-L29 9.0.1.121(C431E4R1P4)_Firmware_9.0.0_r3_EMUI9.0.1_ 05015TYU.osp

[.:hack3r2k:.]

SPECIAL NOTE1:

If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the 'usb_driver' folder




So i suggest installing DriverInstall.exe from usb_driver folder, reboot pc and repeat

[KrzychuG]

I've done that in the first place after seeing changelog. I used DriverInstall.exe from usb_driver directory. I noticed that it wiped the old driver and installed new one, then i rebooted and i see that it's being used. Also, my problem seems to be at last stage, when phone is already in fastboot mode.

[.:hack3r2k:.]

then check if the fastboot drivers are installed also. Also avoid saving file to strange folders such as "_FLASHe". Try to use only characters in the name


Br

[KrzychuG]

Tried again yesterday, saved backup in F:\ directly but it's still the same. Phone is detected in fastboot mode and that's where the fun ends. I have to reflash the phone to make it boot into Android again. I'm using this fw from support: Amman-L29 9.0.1.121(C431E4R1P4)_Firmware_9.0.0_r3_EMUI9.0.1_ 05015TYU.osp each time.

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM35))
Preparing to start flash mode;
Preparing to open COM35
Connecting;
Downloading DA;
Initializing;
Rid: bcec51b6f54732a203052280d9c3fd7e
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x438F0442 0xD316B8E4  [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x255400000



Searching data;
Checking data;

Contents saved to :
F:\HUAWEI Y5 2019_IMEI_F2FA2E09_854F4D70_bcec51b6f54732a203052280d9c3fd7e_13_09_2019_14_56_29.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (MediaTek PreLoader USB VCOM (Android) (COM108))
Preparing to start fastboot mode; 

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;

IMEI repair FAILED; Reflash the phone with the firmware from the support and retry;

Time needed - 00:01:44

[.:hack3r2k:.]

Just one thing. Are you sure you are not mixing the models ? Because Honor 8S and Y5 2019 look pretty much the same


Br

[KrzychuG]

I has Huawei logo on the front glass. I see HL1AMNM VN1 on the board, testpoint and firmware matches.

[Fast Unlocker]

you can see correct model by checking imei

[KrzychuG]

Based on IMEI (imei.info) it should be: Y5 (2019) (AMN-LX9).

I'll have to check this again because it could be fastboot drivers issue. I noticed that i was unable to flash Huawei with DC-Phoenix recently (couldn't read info) and after i reinstalled Huawei fastboot drivers again it started to work.

Any chance to repair IMEI permanently on this model yet?

[.:hack3r2k:.]

Originally Posted by KrzychuG

Based on IMEI (imei.info) it should be: Y5 (2019) (AMN-LX9).

I'll have to check this again because it could be fastboot drivers issue. I noticed that i was unable to flash Huawei with DC-Phoenix recently (couldn't read info) and after i reinstalled Huawei fastboot drivers again it started to work.

Any chance to repair IMEI permanently on this model yet?

faulty drivers could cause that error as well . SO check carefully. As i answered before so far the answer is no to your other question


Br

[mhammadleo]

same here this model is diffrenet

[Fast Unlocker]

we have tried 100 set here myself all works fine

best thing to try to read dump and upload it somewhere to check if there is anything difference also make clear picture for pcb to see if there is such difference

[KrzychuG]

Could this be an issue?

Originally Posted by http://forum.gsmhosting.com/vbb/13833705-post2.html

Is because the fastboot got locked with new shipments. I can add an alternative way for this.

[.:hack3r2k:.]

Originally Posted by KrzychuG

Could this be an issue?

Yes but the same user told that flashing the phone fixed his issues. Is what i told you from the start


http://forum.gsmhosting.com/vbb/13834927-post5.html

[KrzychuG]

Except that i already flashed it with file from support. Otherwise phone won't even boot into Android after a failed attempt. I re-checked the drivers and reinstalled the one that comes with Furious and it's still the same for me:

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;

IMEI repair FAILED; Reflash the phone with the firmware from the support and retry;

That's where it ends for me. I don't see any other flash file on support area, not sure what else i can check for the moment.