ZTE F328 Skinny NZ Unlock help

[karotu]

Hi,

Been getting this when plugging in fone using MTK reader..

COM opened ok;
Phone must be powered off;
Keep pressing the power button if serial used !
(for USB connection keep SPACE or * (STAR) key pressed and insert the usb cable)
COM opened ok;
Phone must be powered off;
Keep pressing the power button if serial used !
(for USB connection keep SPACE or * (STAR) key pressed and insert the usb cable)
COM opened ok;
Phone must be powered off;
Keep pressing the power button if serial used !
(for USB connection keep SPACE or * (STAR) key pressed and insert the usb cable)

COM port is seen but cannot pickup phone.. COM port 1 is shown so am a bit worried..

Rgds,

K

[.:hack3r2k:.]

Must select USB from the comports list. Select as model F327s

Br

[karotu]

Solved using MTKReader_v1.0.0.627

Searching phone;
Phone detected (@oem141.inf,%vcom_bootrom%;MediaTek USB Port)
Preparing to start meta mode; 
COM opened ok;
Phone must be powered off;
Keep pressing the power button if serial used !
(for USB connection keep SPACE or * (STAR) key pressed and insert the usb cable)
Connecting;
Meta mode entered;
Baseband Chip:    MT6276
Sw version:    Skinny_NZ_F328_T04
Hw Version:    ZTE_F328_T01
Reading phone info;
IMEI:        861160-xxxx-
Reading simlock info;


Unlock codes:



Locked to:    FFF-FF
code_cat_n:    12345678 enabled:    no    tries: 5
code_cat_ns:    12345678 enabled:    yes    tries: 0
code_cat_sp:    11112222 enabled:    no    tries: 10
code_cat_c:    33334444 enabled:    no    tries: 10
code_cat_sim:    55556666 enabled:    no    tries: 10
code_cat_ns_sp:    77778888 enabled:    no    tries: 10
code_cat_sim_c:    99990000 enabled:    no    tries: 10

Time needed - 00:00:16

Log file saved to: LOG_12_10_2017_08_28_00.txt

Instructions:
1. Open up MTKReader, Select Unlock by Model, choose ZTE F327 and use USB as ComPort selection.
2. After phone is powered off, press space (the zero on the phone keypad) as you click Read Codes button on MTKReader.. now, without letting the space go, plug in the OTG to your phone.
3. Software should pick up fone and unlock as in result code above.

Thanks!

[.:hack3r2k:.]

On v1.0.0.628 from the support you have F328 in the list. Added in FAQ as well

http://www.furiousgold.com/en/help/h...f328-skinny-nz

Br