ZTE ORANGE REYO - ZTE Blade Q Maxi [SOLVED]

[ersa]

I try to unlock with pack 6 and OTSmart_v1.0.0.473
Connected in FTM mode (there is no FTM mode on LCD but LED is green)
VOLUME DOWN + POWER ON.

IMEI is readed wrong!!!
counter tries and network code 26003 is OK!!!

here is the log:

Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (USB Modem Driver)
Preparing to start flash mode;
Connecting;
Downloading DA;
Initializing;
Rid: 01dbb66bd8175af9afe1b758693ebfd3
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM Port)
TRYING TO OPEN COM95;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, 05]
HW_STORAGE_EMMC: 0x484A0190 0x64314734 0xA3048604 0xAB1122D5 [SIZE=0xE7600000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x5C680000 SIZE: 0x8AF80000

Searching data;

Locked to: 260-03
code_cat_n: 12345678 enabled: yes tries: 6
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 10
code_cat_c: 33334444 enabled: no tries: 10
code_cat_sim: 55556666 enabled: no tries: 10
code_cat_ns_sp: 77778888 enabled: no tries: 10
code_cat_sim_c: 99990000 enabled: no tries: 10

Code reading finished; Remove battery and cable;

Time needed - 00:00:23

[.:hack3r2k:.]

This phone doesnt have any otp imei so is normal to see that. And whats the problem !? Must reply YES when the sw asks if to direct unlock it.


The truth is still inside the c0de ...

[ersa]

Phone unlocked with DIRECT UNLOCK method!

Thank you!

BR
ERSA
Seb