dead C65 flash type not supported
 

I have a dead C65 when I try to flash It ! the soft gives Flash type not supported ! as shown bellow ! please I nead your help !



================================================== ====
MARTECH Siem Serv. Tools 11.6 Info File
================================================== ====
DEVICE TYPE : BOX II / BOX II PLUS
BOX SERIAL NUMBER : xxxxxxxxxxxxxxxxxxxx
REGISTRATION STRING : GMSBoutique.com
-----------------------------------
Selected COM Speed : 921600 kbd
Selected Phone Type : C65, CV65, CT65, C66
Selected kind of Service Mode : Testpoint Adapter v2.0 / v3.0
Use slow Unlock/Repair method : SELECTED
Don't check Ph.Type (for Repair) : SELECTED
Auto Show Test-Point Info : SELECTED
-----------------------------------
SETTINGS_01 : SELECTED
SETTINGS_02 : SELECTED
SETTINGS_03 : NOT SELECTED
SETTINGS_04 : SELECTED
SETTINGS_05 : SELECTED
SETTINGS_06 : NOT SELECTED
SETTINGS_07 : SELECTED
-----------------------------------
Phone Type: Error!
SW Version: 5B
Flash Type (SW): C14D
Flash Type (HW): C14D
Phone ID: D652002C
LANG / T9: /

MESSAGE BOX:

__________________________________________________ ____

ERROR (03.04)
-------------------------------------------------
Not correct SP-Blocks in EEprom.
Probably EEprom area is damaged.
-------------------------------------------------
Please check phone. If doesn't work:
1) Upload correct EEprom...
2) Use "Repair IMEI" function.


__________________________________________________ ______________________________________________________ ____

Reading Data... ok.
-----------------------------------------------------

i also need flash file & flasher for dead c65
any one can post here ??????????????

rehot your phone all will be ok.

regards