Can you flash with MiniUSB with TMS - GSM-Forum

mob453 · 03-09-2006, 23:50

with a k608 etc?

CID is 49

Lombard · 03-15-2006, 23:39

Is the cable a original ericsson?>

mob453 · 03-22-2006, 20:43

MiniUSB is an original sony ericsson cable, it comes with the k600/v600/k608 and can be used with Davinci to flash the phone.

A t28 service cable was used with TMS and the result was:

Error: 0x00F210

tried again and got:

Error: 0x00F214

After this the phone had a white screen and kept flashing a white screen until I removed the battery.

I then had to use Davinci to flash the phone via MiniUSB because TMS would not flash it, the result is my K608 is now a K600.

Sadly this does not help me because I need my phone model to be K608i. As far as I can see TMS have K608 flash files and repair files.

What would you suggest next, UsbSmart will not flash the phone either unless I use testpoint, but seeing as Davinci can flash without testpoint I see no reason to use testpoint.

Can TMS support MiniUSB?

mob453 · 03-24-2006, 00:03

Just to add I got a new service cable and successfully flashed k608i firmware to my k608, sadly the phone model still declares it is a k600 and I'm back at square one with one wasted credit which did not help.

Erom brings up the Error: 0x00F210 so thats not much help.

I've pulled the phone apart, got down to the pcb to do testpoint and the side I need is fully metal plate sealed.

Murphy · 05-15-2006, 23:45

Quote:

Originally Posted by mob453

with a k608 etc?

CID is 49

Yes, you can flash a K608 phone using mini-USB Original cable.

Regards,

sayas · 05-17-2006, 15:24

Just to add I got a new service cable and successfully flashed k608i firmware to my k608, sadly the phone model still declares it is a k600 and I'm back at square one with one wasted credit which did not help.

Erom brings up the Error: 0x00F210 so thats not much help.

I've pulled the phone apart, got down to the pcb to do testpoint and the side I need is fully metal plate sealed.

Murphy · 05-18-2006, 23:25

Hello there,

why are you trying EROM Reflashing? playing or something?

btw... which is the problem that Phone info displays K600 and not K608?

same hardware, same firmware and non-sense thing under my opinion.

Regards,

03-09-2006, 23:50	#1 (permalink)
mob453 Crazy Poster Join Date: Aug 2005 Age: 32 Posts: 51 Member: 170471 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Can you flash with MiniUSB with TMS with a k608 etc? CID is 49

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Can you flash 6680 free with just a laptop and DKU5 cable	TANGOO	Nokia Base Band 5 ( BB-5 )	4	05-28-2007 22:15
Can you flash a V3T with V3R firmware?	aarons6	Smart-Clip	10	03-13-2007 10:11
Can you flash a V3t with a V3i file?	hmotwr	P2k Series	0	11-15-2006 22:55
Can You Flash A Nokia 7280 With UFS3?	IDUK	UFS2 + UFS3-Tornadoflasher	4	07-24-2005 07:04
Info req: can you flash a dct-3 nokia with out lossing phone numbers stored in phone	skedone	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	11	09-22-2002 10:27

03-15-2006, 23:39	#2 (permalink)
Lombard Insane Poster Join Date: Jun 2004 Location: Glasgow Age: 32 Posts: 82 Member: 69993 Status: Offline Thanks: 4 Thanked 4 Times in 4 Posts	Is the cable a original ericsson?>

03-22-2006, 20:43	#3 (permalink)
mob453 Crazy Poster Join Date: Aug 2005 Age: 32 Posts: 51 Member: 170471 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	MiniUSB is an original sony ericsson cable, it comes with the k600/v600/k608 and can be used with Davinci to flash the phone. A t28 service cable was used with TMS and the result was: Error: 0x00F210 tried again and got: Error: 0x00F214 After this the phone had a white screen and kept flashing a white screen until I removed the battery. I then had to use Davinci to flash the phone via MiniUSB because TMS would not flash it, the result is my K608 is now a K600. Sadly this does not help me because I need my phone model to be K608i. As far as I can see TMS have K608 flash files and repair files. What would you suggest next, UsbSmart will not flash the phone either unless I use testpoint, but seeing as Davinci can flash without testpoint I see no reason to use testpoint. Can TMS support MiniUSB?

03-24-2006, 00:03	#4 (permalink)
mob453 Crazy Poster Join Date: Aug 2005 Age: 32 Posts: 51 Member: 170471 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Just to add I got a new service cable and successfully flashed k608i firmware to my k608, sadly the phone model still declares it is a k600 and I'm back at square one with one wasted credit which did not help. Erom brings up the Error: 0x00F210 so thats not much help. I've pulled the phone apart, got down to the pcb to do testpoint and the side I need is fully metal plate sealed.

05-17-2006, 15:24	#6 (permalink)
sayas Temporary banned !! Join Date: May 2006 Location: Buenos Aires, Argentina Posts: 194 Member: 277973 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	Just to add I got a new service cable and successfully flashed k608i firmware to my k608, sadly the phone model still declares it is a k600 and I'm back at square one with one wasted credit which did not help. Erom brings up the Error: 0x00F210 so thats not much help. I've pulled the phone apart, got down to the pcb to do testpoint and the side I need is fully metal plate sealed.

05-18-2006, 23:25	#7 (permalink)
Murphy Product Supporter Join Date: Aug 2002 Location: Movitel.NET Posts: 905 Member: 14284 Status: Offline Thanks: 2 Thanked 17 Times in 9 Posts	Hello there, why are you trying EROM Reflashing? playing or something? btw... which is the problem that Phone info displays K600 and not K608? same hardware, same firmware and non-sense thing under my opinion. Regards,