902T usb device cant recognize - GSM-Forum

beega · 04-12-2006, 06:30

Hi,

followed unlock instruction but phone cant be found by Xp, is this a cable or driver issue? When I put orig. voda sim in phone, I see "circuit restriction" msg for 1-2 sec, is this normal?? Phone code : 9999 and is off. I use nec cable tested on GX15 / 25. Tried on 2 pc also.

Regards

Gobi · 04-12-2006, 07:12

Check in Device Manager --> and tell us if you see there your phone in Modem and Ports section, first at all .

If your phone is not visible there, then you have not installed correctly or not at all the USB Drivers. Of course the phone must be connected powered on to the PC, and using an USB Sharp or NEC cable ( is same cable).

regards,
Gobi

beega · 04-12-2006, 07:32

Hi,

I dont see the phone in device manager (modem, ports).
When I install TS803_usb-driver_setup.exe on XP it gives me "not passed windows logo..." and I click on continue, this happens 4x until finished.
Phone is powered-on when I connect using nec cable. Tnx for reply.

Regards
beega

Gobi · 04-12-2006, 07:48

When you run the driver-install exe file, the phone must be DISCONNECTED .

IF still you cannot install the driver, then you must try to clean up your Windows, since there can be only Win problem left.

regards,
Gobi

beega · 04-12-2006, 09:32

Hi,

Phone was disconnected when I installed .exe. Thats what I also have in mind, to start w/ fresh OS. Ok sir, thanks for the help anyway...

Regards
beega

beega · 04-13-2006, 03:55

Hi,

Tried on newly formatted hd, w/ newly installd Xp and 902t driver, phne code off. Also tried on other pc/xp. Same response as before..."usb device not recognized..."! Cable is tested working on other phone.

My question; anyone seen this message on their 902t? " circuit restriction" under "item restriction" title. This message shows at startup for 1-3 sec when orig voda sim is used, . Phone was already on this state prior to any unlocking. Maybe hardware issue here....

Regards
beega

halongmobile · 04-13-2006, 06:19

HW................... not ok

fenomena · 04-21-2008, 12:20

anybody can help where to find that driver for this phone?
thanks inadvance

vygism · 04-21-2008, 13:47

All drivers are at automatic support sites.

Regards,Vygis

04-12-2006, 06:30	#1 (permalink)
beega Freak Poster Join Date: Dec 2004 Posts: 276 Member: 96236 Status: Offline Thanks Meter: 7	902T usb device cant recognize Hi, followed unlock instruction but phone cant be found by Xp, is this a cable or driver issue? When I put orig. voda sim in phone, I see "circuit restriction" msg for 1-2 sec, is this normal?? Phone code : 9999 and is off. I use nec cable tested on GX15 / 25. Tried on 2 pc also. Regards

04-13-2006, 03:55	#6 (permalink)
beega Freak Poster Join Date: Dec 2004 Posts: 276 Member: 96236 Status: Offline Thanks Meter: 7	Anyone seen this msg Hi, Tried on newly formatted hd, w/ newly installd Xp and 902t driver, phne code off. Also tried on other pc/xp. Same response as before..."usb device not recognized..."! Cable is tested working on other phone. My question; anyone seen this message on their 902t? " circuit restriction" under "item restriction" title. This message shows at startup for 1-3 sec when orig voda sim is used, . Phone was already on this state prior to any unlocking. Maybe hardware issue here.... Regards beega

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB Device Not Recognized	kabirhossain	Multi-Box	3	10-02-2007 16:05
7250 & cable & winxp: USB device not recognized	-+8+-	Nokia Digital Core Technology 4 ( DCT-4 )	2	06-21-2007 06:09
USB Device Not Recognized	vivekjk	Bluetooth-Software	2	09-11-2006 09:01
prodogi 5.00 always usb device not recognized?	surfer2go	Nokia Digital Core Technology 4 ( DCT-4 )	1	03-11-2005 14:20

04-12-2006, 07:12	#2 (permalink)
Gobi No Life Poster Join Date: Sep 2001 Location: GSM-TOOL Age: 52 Posts: 4,092 Member: 6328 Status: Offline Thanks Meter: 3,595	Check in Device Manager --> and tell us if you see there your phone in Modem and Ports section, first at all . If your phone is not visible there, then you have not installed correctly or not at all the USB Drivers. Of course the phone must be connected powered on to the PC, and using an USB Sharp or NEC cable ( is same cable). regards, Gobi

04-12-2006, 07:32	#3 (permalink)
beega Freak Poster Join Date: Dec 2004 Posts: 276 Member: 96236 Status: Offline Thanks Meter: 7	Hi, I dont see the phone in device manager (modem, ports). When I install TS803_usb-driver_setup.exe on XP it gives me "not passed windows logo..." and I click on continue, this happens 4x until finished. Phone is powered-on when I connect using nec cable. Tnx for reply. Regards beega

04-12-2006, 07:48	#4 (permalink)
Gobi No Life Poster Join Date: Sep 2001 Location: GSM-TOOL Age: 52 Posts: 4,092 Member: 6328 Status: Offline Thanks Meter: 3,595	When you run the driver-install exe file, the phone must be DISCONNECTED . IF still you cannot install the driver, then you must try to clean up your Windows, since there can be only Win problem left. regards, Gobi

04-12-2006, 09:32	#5 (permalink)
beega Freak Poster Join Date: Dec 2004 Posts: 276 Member: 96236 Status: Offline Thanks Meter: 7	Hi, Phone was disconnected when I installed .exe. Thats what I also have in mind, to start w/ fresh OS. Ok sir, thanks for the help anyway... Regards beega

04-13-2006, 06:19	#7 (permalink)
halongmobile No Life Poster Join Date: Dec 2003 Location: http://www.halong.vn/ Age: 33 Posts: 808 Member: 45580 Status: Offline Thanks Meter: 48	HW................... not ok

04-21-2008, 12:20	#8 (permalink)
fenomena Insane Poster Join Date: Feb 2006 Posts: 81 Member: 232016 Status: Offline Thanks Meter: 6	anybody can help where to find that driver for this phone? thanks inadvance

04-21-2008, 13:47	#9 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	All drivers are at automatic support sites. Regards,Vygis