c2200 i needs WHICH cable to work with vygistoolbox?? - GSM-Forum

SicilianBoy · 12-10-2005, 01:29

please can anybody tell me which cable do i need to connect c2200 i with vygis...??? i try the same cable of lg 8110-8120-8130 etc but c2200 i just turn on by itself...any reason? anybody can help me out? thanks a lot!

software and phone have absolutely no comunications....WHY???

P.S: i also used cable for LG 7050 with no luck..

Gobi · 12-10-2005, 04:34

Quote:

Originally Posted by SicilianBoy

please can anybody tell me which cable do i need to connect c2200 i with vygis...??? i try the same cable of lg 8110-8120-8130 etc but c2200 i just turn on by itself...any reason? anybody can help me out? thanks a lot!
software and phone have absolutely no comunications....WHY???

P.S: i also used cable for LG 7050 with no luck..

The 7050 is the right cable .
Check also if the pin19 inside is connected to gnd

(this is most often the problem)

regards,
Gobi

James_S · 12-10-2005, 06:23

And remember to hold down power-button while it connects.

SicilianBoy · 12-10-2005, 09:26

Quote:

Originally Posted by Gobi

The 7050 is the right cable .
Check also if the pin19 inside is connected to gnd

(this is most often the problem)
regards,
Gobi

gobi please can u tell me how can i check if pin19 is connected to gnd?

i have to open the connector and check....what..?

P.S:i also have a L341 i it still requires the 7050 cable?

thanks

SicilianBoy · 12-10-2005, 12:30

this c2200 doesnt have network so ok i used the 7050 to connect the phone and i changed i*** but the phone STILL has no network...what could it be??? what can i do now to let him have network??? the phone is really useless in the way it is now...

P.S:i had a look at support page for c2200 and its a shame that there are no flash files with italian language,dont u think the support is a bit poor,i also checked other model of 2g lg and noone has a firmware with italian language in it...

P.P.S: Software version of this c2200 right now is : C2200P40-39-V101-222-01 JAN 24 20050

Gobi · 12-10-2005, 15:14

Nice to see you could connect the phone, at last

1
- If you have changed the imei to one not blacklisted anmd still not working, then try to flash the phone with flashfiles avaiable on the support area.

If after this, you still don't have network, then it may be also hardware problem...

2
- About italian language files
We upload flashfiles on the supportarea, so far the desired language pack is avaiable in support area and so far we can get that phones in hand to read the flash, or our friends and/or customer do it

There are right now 5,1GB flashfiles in VygisSupport area, and from this 2,9GB LG Flashfiles.
We do our best, and if the customer would from time to time read some new flashfiles and send to us for uploading, then we would do even better.

You want more flashfiles???
Then put all your hands together, read flashfiles and send to gobi(at)rdsbv.ro and gsm(at)cd.ro --> and you will not need to ask again...

regards,
Gobi

SicilianBoy · 12-11-2005, 02:37

hi gobi thanks for your answer,u know what?

if i connect the phone when its on it works and i can do the "special" features BUT i cant connect the phone if its off to flash it...do u have any idea why this could happen?

about the flashfiles.. i dont understand but at some point u say that the italian flashfile of a c2200 is on the support page? correct me if im wrong...anyway if the italian flash file isnt avaiable then how am i supposed to flash the phone with? i cant give a phone with english language back to my *******r,in italy everybody knows nothing about english language thats also why we suck!

anyway if u help me to connect the phone when its turned off i will read my flash and send it to u guys!

thanks again!

Gobi · 12-11-2005, 05:08

Exacly that i was meaning: Read the italian flashes out, send to me and i will upload them

About connecting in ''Off mode"

1 - check in the Cable CONNECTOR if pin 19 (at 7050 cable) is connected to Ground.
For pin 19 and GND identification --> please check pinout schematic in support area .

2 - Press in the software ''Connect'', THEN ONLY connect cable to phone and fast press (and keep pressed) Power on buttn of the phone.

regards,
Gobi

SicilianBoy · 12-11-2005, 12:24

Quote:

Originally Posted by Gobi

Exacly that i was meaning: Read the italian flashes out, send to me and i will upload them

About connecting in ''Off mode"
1 - check in the Cable CONNECTOR if pin 19 (at 7050 cable) is connected to Ground.
For pin 19 and GND identification --> please check pinout schematic in support area .
2 - Press in the software ''Connect'', THEN ONLY connect cable to phone and fast press (and keep pressed) Power on buttn of the phone.
regards,
Gobi

this problem with pin 19 can avoid me to connect c2200? i think this is weird cause i connected a l341 i in off mode and it works fine...

anyway gobi if u still think that that could be the problem i will try to have a look at it!

thanks in advance,later

12-10-2005, 01:29	#1 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 33 Posts: 2,068 Member: 88333 Status: Offline Thanks: 15 Thanked 48 Times in 41 Posts	c2200 i needs WHICH cable to work with vygistoolbox?? please can anybody tell me which cable do i need to connect c2200 i with vygis...??? i try the same cable of lg 8110-8120-8130 etc but c2200 i just turn on by itself...any reason? anybody can help me out? thanks a lot! software and phone have absolutely no comunications....WHY??? P.S: i also used cable for LG 7050 with no luck..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
need help! which cable to use with lg M4410	manish665	Multi-box LITE	1	01-15-2008 08:24
which cable to use with a70??	elvan121	E-Gold Based Phones	5	10-29-2005 13:53
which cable to use with crack software for micro snapper	jesto80	Various	8	09-22-2005 06:49
Which cable to use with t28s	Amir-SkillZ	Old Ericsson Phones & Sony Phones	0	08-06-2005 15:02
which cable to use with terminator III?	anyone	Sony Ericsson	1	02-04-2003 08:21

12-10-2005, 06:23	#3 (permalink)
James_S No Life Poster Join Date: Jan 2005 Age: 43 Posts: 1,728 Member: 105625 Status: Offline Thanks: 10 Thanked 43 Times in 33 Posts	And remember to hold down power-button while it connects.

12-10-2005, 12:30	#5 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 33 Posts: 2,068 Member: 88333 Status: Offline Thanks: 15 Thanked 48 Times in 41 Posts	this c2200 doesnt have network so ok i used the 7050 to connect the phone and i changed i*** but the phone STILL has no network...what could it be??? what can i do now to let him have network??? the phone is really useless in the way it is now... P.S:i had a look at support page for c2200 and its a shame that there are no flash files with italian language,dont u think the support is a bit poor,i also checked other model of 2g lg and noone has a firmware with italian language in it... P.P.S: Software version of this c2200 right now is : C2200P40-39-V101-222-01 JAN 24 20050

12-10-2005, 15:14	#6 (permalink)
Gobi No Life Poster Join Date: Sep 2001 Location: GSM-TOOL Age: 41 Posts: 4,098 Member: 6328 Status: Offline Thanks: 1 Thanked 3,591 Times in 267 Posts	Nice to see you could connect the phone, at last 1 - If you have changed the imei to one not blacklisted anmd still not working, then try to flash the phone with flashfiles avaiable on the support area. If after this, you still don't have network, then it may be also hardware problem... 2 - About italian language files We upload flashfiles on the supportarea, so far the desired language pack is avaiable in support area and so far we can get that phones in hand to read the flash, or our friends and/or customer do it There are right now 5,1GB flashfiles in VygisSupport area, and from this 2,9GB LG Flashfiles. We do our best, and if the customer would from time to time read some new flashfiles and send to us for uploading, then we would do even better. You want more flashfiles??? Then put all your hands together, read flashfiles and send to gobi(at)rdsbv.ro and gsm(at)cd.ro --> and you will not need to ask again... regards, Gobi

12-11-2005, 02:37	#7 (permalink)
SicilianBoy No Life Poster Join Date: Oct 2004 Age: 33 Posts: 2,068 Member: 88333 Status: Offline Thanks: 15 Thanked 48 Times in 41 Posts	hi gobi thanks for your answer,u know what? if i connect the phone when its on it works and i can do the "special" features BUT i cant connect the phone if its off to flash it...do u have any idea why this could happen? about the flashfiles.. i dont understand but at some point u say that the italian flashfile of a c2200 is on the support page? correct me if im wrong...anyway if the italian flash file isnt avaiable then how am i supposed to flash the phone with? i cant give a phone with english language back to my *******r,in italy everybody knows nothing about english language thats also why we suck! anyway if u help me to connect the phone when its turned off i will read my flash and send it to u guys! thanks again!

12-11-2005, 05:08	#8 (permalink)
Gobi No Life Poster Join Date: Sep 2001 Location: GSM-TOOL Age: 41 Posts: 4,098 Member: 6328 Status: Offline Thanks: 1 Thanked 3,591 Times in 267 Posts	Exacly that i was meaning: Read the italian flashes out, send to me and i will upload them About connecting in ''Off mode" 1 - check in the Cable CONNECTOR if pin 19 (at 7050 cable) is connected to Ground. For pin 19 and GND identification --> please check pinout schematic in support area . 2 - Press in the software ''Connect'', THEN ONLY connect cable to phone and fast press (and keep pressed) Power on buttn of the phone. regards, Gobi