How to make GW300 RJ45 cable
 

can someone upload pictures / vids on how to make Gw300 RJ45 cable,

thanks

LG GW300 RJ45 CABLE PINOUT


KEYBOARD
________________________
/ \
/ 5 4 3 2 1 \
| __ __ __ __ __ |
| |



5 - GND (RJ45 7,8 pins)
4 - SW_ID to GND via 130 KOm resistor
3 - TX (RJ45 3 pin)
2 - RX (RJ45 2 pin)

Yeah, Thanks but that does not help me, Im new to this and i want to see actual picture of cable and phone ends of cable.

Or if someone can tell me where to buy the cable!

TP cable not to hard to make no need to solder to phone board use just test point pins conected to rj45 as diagram in flasher folder ...will upload picture tomorrow ....

gw300 tp
 

looks like no one wants to give you this information

here is something for you

press thanks ;)

I am a noob at making cable, I opened up a Micro Usb Cable and only found Red, Black, Green found as (data -) White (Data +). Anyway to translate to Rx Tx... or where to connect. Thanks.

Phone type : LG-GW300
Phone IMEI : 355737-03-++++++-0

Please plug cable to phone.Phone must be OFF.If bootloading not starts - press power ON and keep it pressed until boot loading will be finished.
----------------------------------------------------------
Loading boot... OK
Flash ID : ECB1
Flash type : Samsung NAND - 128 Mb
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Found sim unlock codes :
6406492383323135
6406492383323135
2027389312137073
======== Process completed ========
Operation time - 00:03
----------------------------------------------------------
For operation finishing,do next :
- power phone ON without SIM
- type 2945#*71001# to enter unlock menu
- enter unlock code or codes

I had made the cable but it doesen't boots the phones... there something wrong with the cable...

I made the cable folowin this diagram and its working very good.
I unlock and read a lot of phones.
Maybe this will help you its more clear.Dont use +5V pin in cable for GW300.
If dont work at first try replace rx and tx pins.
BR.

http://img153.imageshack.us/img153/1750/gw300cable.jpg
Uploaded with ImageShack.us