KF350 - flashing problem - GSM-Forum

evilgabbie · 06-20-2009, 00:24

Phone originally had "hang on startup" problem.

So I proceeded to reflash, first flash went up to 5x% but stupid me, I didn't check the battery level so the battery died and connection got interrupted. Problem now is whenever I try to flash the phone (with a full charge), it would just stop @ 11% or 9% everytime.

Is the board done ?

Please advise.

vygism · 06-20-2009, 00:45

You need to try to use other box like interface to phone-some time this was already discussed

Regards,Vygis

evilgabbie · 06-20-2009, 21:29

I tried to do a search but I came up empty, I will try via nspro connection.

djkiddrick · 06-26-2009, 18:08

mister vygis did you have a KF350 firmware with spanish languaje(not the telcel firmware) or a factory flash??regard

motiam4 · 06-26-2009, 19:49

We need solution for flash bug with these models ..i have KF600..and it has same prb..flash not complete..
i gave up after 4weeks of trying..but phone still dead..
now i only have one solution just pay new phone for customer..:-)

and i won't flash these phones again until our support fix this bug..

djkiddrick · 06-26-2009, 19:52

sir there no bug with kf600 flash, i flash a few phones with that flash without problems.

motiam4 · 06-27-2009, 11:28

Quote:

Originally Posted by djkiddrick

sir there no bug with kf600 flash, i flash a few phones with that flash without problems.

which interface u used..?

djkiddrick · 06-27-2009, 16:08

vygis on port 2,regard

evilgabbie · 06-27-2009, 23:27

I tried using FG / NSPRO / JAF as interface.. same problem, doesn't always connect =(

djkiddrick · 06-28-2009, 09:31

no sir,that interface that your using doesnt work,try with se tool,polar box or infinity.

evilgabbie · 06-29-2009, 06:59

I only have setool key + ufs as interface... i guess i am out of luck

06-20-2009, 00:24	#1 (permalink)
evilgabbie Freak Poster Join Date: Sep 2004 Location: Toronto Age: 41 Posts: 229 Member: 84323 Status: Offline Thanks Meter: 15	KF350 - flashing problem Phone originally had "hang on startup" problem. So I proceeded to reflash, first flash went up to 5x% but stupid me, I didn't check the battery level so the battery died and connection got interrupted. Problem now is whenever I try to flash the phone (with a full charge), it would just stop @ 11% or 9% everytime. Is the board done ? Please advise.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
kf350 flash file with spanish lang ? (ANSEWRED)	aleon	VygisToolbox	10	08-19-2011 21:58
E52 RM-469 Flashing problem.Flash ID not supported for this loader (RAPUv11_algo_xsr1	rafik2533	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	4	04-04-2010 20:38
LG KF350 flash problem	UNLOCK PARK ®	Z3X-Team Products	0	02-02-2010 14:31
kf350 flash file	naje	FuriousGold	1	04-21-2009 06:56
LG KF350 flashing	gilica_gsm	HWK	0	02-11-2009 12:00

06-20-2009, 00:45	#2 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	You need to try to use other box like interface to phone-some time this was already discussed Regards,Vygis

06-20-2009, 21:29	#3 (permalink)
evilgabbie Freak Poster Join Date: Sep 2004 Location: Toronto Age: 41 Posts: 229 Member: 84323 Status: Offline Thanks Meter: 15	I tried to do a search but I came up empty, I will try via nspro connection.

06-26-2009, 18:08	#4 (permalink)
djkiddrick No Life Poster Join Date: Dec 2007 Location: FomTekLAB Mexico-United States Posts: 647 Member: 645603 Status: Offline Thanks Meter: 89	mister vygis did you have a KF350 firmware with spanish languaje(not the telcel firmware) or a factory flash??regard

06-26-2009, 19:49	#5 (permalink)
motiam4 No Life Poster Join Date: Jul 2007 Location: USA Posts: 550 Member: 540254 Status: Offline Thanks Meter: 30	We need solution for flash bug with these models ..i have KF600..and it has same prb..flash not complete.. i gave up after 4weeks of trying..but phone still dead.. now i only have one solution just pay new phone for customer..:-) and i won't flash these phones again until our support fix this bug..

06-26-2009, 19:52	#6 (permalink)
djkiddrick No Life Poster Join Date: Dec 2007 Location: FomTekLAB Mexico-United States Posts: 647 Member: 645603 Status: Offline Thanks Meter: 89	sir there no bug with kf600 flash, i flash a few phones with that flash without problems.

06-27-2009, 16:08	#8 (permalink)
djkiddrick No Life Poster Join Date: Dec 2007 Location: FomTekLAB Mexico-United States Posts: 647 Member: 645603 Status: Offline Thanks Meter: 89	vygis on port 2,regard

06-27-2009, 23:27	#9 (permalink)
evilgabbie Freak Poster Join Date: Sep 2004 Location: Toronto Age: 41 Posts: 229 Member: 84323 Status: Offline Thanks Meter: 15	I tried using FG / NSPRO / JAF as interface.. same problem, doesn't always connect =(

06-28-2009, 09:31	#10 (permalink)
djkiddrick No Life Poster Join Date: Dec 2007 Location: FomTekLAB Mexico-United States Posts: 647 Member: 645603 Status: Offline Thanks Meter: 89	no sir,that interface that your using doesnt work,try with se tool,polar box or infinity.

06-29-2009, 06:59	#11 (permalink)
evilgabbie Freak Poster Join Date: Sep 2004 Location: Toronto Age: 41 Posts: 229 Member: 84323 Status: Offline Thanks Meter: 15	I only have setool key + ufs as interface... i guess i am out of luck