KP501 cant conect after Flashing disconected - GSM-Forum

urecel · 05-12-2010, 01:33

It was flashing but after Last 99% stop
now cant conect
Press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ...
Operation failed

soctia · 05-12-2010, 02:43

use usb without battery

urecel · 05-12-2010, 02:52

nothing, some error after Booting, by usb. but if you can . show me tutorial about, for see if i am wrong.

Thanks

vygism · 05-12-2010, 23:29

Actually what was phone state before flashing? One more-if you can't connect by USB-try via RJ45,if phone's hardware is OK-you must connect in all cases using RJ45 cable.

Regards, Vygis

urecel · 05-13-2010, 18:41

ok.
1
phone was in LG logo only
2
repair phone Eprom.
3
phone was working well
4
remove batery, hang back in Lg logo
5
Was Flashing but i disconect phone in 99% moving phone.
6
now cant conect again

milano · 05-13-2010, 20:10

her u find good solution

http://forum.gsmhosting.com/vbb/f177...cookie-675647/

05-12-2010, 01:33	#1 (permalink)
urecel No Life Poster Join Date: Jun 2007 Age: 37 Posts: 798 Member: 520810 Status: Offline Thanks Meter: 231	KP501 cant conect after Flashing disconected It was flashing but after Last 99% stop now cant conect Press Power ON and keep it pressed until bootloader will start ... OK ---------------------------------------------------------- Loading primary loader ... OK Loading secondary loader ... OK Changing baudrate ... OK Setting bus ... OK Loading certificate ... Operation failed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
5110 5.24 locked all 4 locks after unlocking...	MCG	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	03-07-2000 22:24

05-12-2010, 02:43	#2 (permalink)
soctia No Life Poster Join Date: Jun 2006 Location: JAMAICA Posts: 2,093 Member: 293299 Status: Offline Thanks Meter: 266	use usb without battery

05-12-2010, 02:52	#3 (permalink)
urecel No Life Poster Join Date: Jun 2007 Age: 37 Posts: 798 Member: 520810 Status: Offline Thanks Meter: 231	nothing, some error after Booting, by usb. but if you can . show me tutorial about, for see if i am wrong. Thanks

05-12-2010, 23:29	#4 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Actually what was phone state before flashing? One more-if you can't connect by USB-try via RJ45,if phone's hardware is OK-you must connect in all cases using RJ45 cable. Regards, Vygis

05-13-2010, 18:41	#5 (permalink)
urecel No Life Poster Join Date: Jun 2007 Age: 37 Posts: 798 Member: 520810 Status: Offline Thanks Meter: 231	ok. 1 phone was in LG logo only 2 repair phone Eprom. 3 phone was working well 4 remove batery, hang back in Lg logo 5 Was Flashing but i disconect phone in 99% moving phone. 6 now cant conect again

05-13-2010, 20:10	#6 (permalink)
milano No Life Poster Join Date: Nov 2005 Posts: 641 Member: 201840 Status: Offline Thanks Meter: 55	her u find good solution http://forum.gsmhosting.com/vbb/f177...cookie-675647/