ks360 unlock

[zipzap_kill]

i need to unlock ks360 locked to boost network is it supported in vygis or not



and how to unlock it

[unlock trigger]

Originally Posted by zipzap_kill

i need to unlock ks360 locked to boost network is it supported in vygis or not



and how to unlock it

Model is Fully Supported, U can Unlock it by two Ways

1 : Read Unlock Code

2 : Direct Unlock

Regards,Trigger

[debeliamark]

yes - tested - you must use KE500 cable ...

[MPhoneClinic]

Originally Posted by debeliamark

yes - tested - you must use KE500 cable ...

Hi,

i have KE500 cable , but doesn't works, i check the pinout is right. but the box is not detacting the phone, when i press power on it turn on the phone.

any idea??

thanks

[mob-inter]

check cable pinouts connection definately wrong.



***************KF240,KF245,KF300 pinout *******************************

keybord up

18.............1

17 - RX (data to phone)
16 - TX (data from phone)
11 - PWRON connected via 47 kOm resistor to +5V
1,4,14,18 - GND


****KP110,KP115,KP130,KP210,KP215,KP220,KP230,KP23 5,KP260,KP265,KP150,C150 pinout **

keybord up

18.............1

17 - RX (data to phone)
16 - TX (data from phone)
1,4,14,18 - GND


*****************************CG180 pinout****************************************

keybord up

18.............1

17 - RX (data to phone)
16 - TX (data from phone)
1,4,14,18 - GND


************************LG240,ME240q pinout***************************************

For flashing-unlocking - use U8110 cable.
For working with service functions-Read IMEI,Write IMEI, Phone Reset - use
LG7050 cable.


************************KE500,ME550 pinout for flashing***************************

keybord up

18.............1

17 - RX (data to phone)
16 - TX (data from phone)
1,4,14,18 - GND

For working with service functions -Read IMEI,Write IMEI, Phone Reset - use
KG800 cable.

*****************************G1800 pinout****************************************
Use standart Motorola T191 Cable

*****************************KG190,C2500 pinout**********************************

keyboard up

/12345\
_______

1 - GND
3 - TX (data from phone)
4 - RX (data to phone)


****************MG160,KG270,KG370,KG320,KG800 pinout******************************

keybord up

18.............1

7 - RX (data to phone)
6 - TX (data from phone)
1,4,14,18 - GND


*******C1100,C1200,C1300,C1400,LG40xx,LG70XX,L11XX pinout************************

keybord up

24.............1

3,12,19,23 - GND
13 - RX (data to phone)
14 - TX (data from phone)
6 - via 10 kOm resistor to +5V


*****LG G510,B1300,G1500,3000,5200,5300,5400,7100,7070 pinout********************

keybord up

18.............1

2 - RX (data to phone)
3 - TX (data from phone),connect it via resistor 15 kOm to +5V
1,13 - GND
15 and 18 connect together


***********************LG-U8110,U8120 pinout**************************************

keybord up

24.............1

12,19 - GND
17 - RX (data to phone)
18 - TX (data from phone)
2 and 21 connect together


Code to reset phone(must be used if after unlocking phone still is locked or has
user code) :
2945#*# and later "Factory reset".. check this

[Dipendra Pathak]

@MPhoneClinic

Replace the Rx to Tx and Tx to Rx in KE500 Cable, then, It works.

[email protected]