LG GS390GO from at&t supported - GSM-Forum

nicacel · 07-14-2010, 23:30

for unlocking GS390GO from at&t just select GS290NGO model and read sim unlock code

Connect phone to cable-phone must be ON, if phone can't be powered connect if OFF and press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Found sim unlock codes :
NCK : 4998 2643 3766 9922
NSCK : 9433 0129 3832 9426
SPCK : 0749 9530 6747 3868
CCK : 5065 9108 6715 3462
SIM : 4751 0918 1990 9248
======== Process completed ========
Operation time - 00:01
----------------------------------------------------------
For operation finishing,do next :
- power phone ON without SIM
- type 2945#*290# to enter unlock menu
- enter needed unlock code

then with original sim enter *#865625# and enter NCK code.

good luck

nicacel · 07-14-2010, 23:37

Is this method first in the world or what?

vygism · 07-15-2010, 00:50

Yes

btw to enter unlock menu is needed original SIM or anyone ?

Regards, Vygis

mobitechnepal · 07-15-2010, 14:35

give me pinout gs390go thanks

vygism · 07-15-2010, 14:37

Have you looked what cable software says to use?

Regards, Vygis

mobitechnepal · 07-15-2010, 14:40

yes but i don,t have gw300 rj45 cabal so need pin out

vygism · 07-15-2010, 14:41

One more time-have you looked what files you have inside "LGI_1_76SC.rar"?

Regards, Vygis

nicacel · 07-15-2010, 17:15

Quote:

Originally Posted by vygism

Yes

btw to enter unlock menu is needed original SIM or anyone ?

Regards, Vygis

yes for this model, need at&t or test sim card to enter *#865625#

br,

vygism · 07-15-2010, 19:17

Ok,thx for info

Regards, Vygis

mrfixit · 07-22-2010, 18:15

Quote:

Originally Posted by nicacel

yes for this model, need at&t or test sim card to enter *#865625#

br,

please try again because my att gs390go dont need att or test card to get to unlock page, insert wrong sim and u get unlock option during startup.
so dont waste time with "at&t or test sim card to enter *#865625# " but yes the longer procedure works too.

jusmejose · 11-20-2010, 02:00

Connecting phone - connect USB cable to phone, phone must be OFF and without battery ...
Driver connected, connecting phone ... OK
----------------------------------------------------------
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ...
Can't load certificate
Operation failed

GSM_STREET · 11-21-2010, 04:26

Try GW300 cable to unlock your GS390GO phone

jusmejose · 12-15-2010, 20:28

Ok But The Micro USB Cable?...

Quote:

Originally Posted by GSM_STREET

Try GW300 cable to unlock your GS390GO phone

vygism · 12-16-2010, 01:07

Locked GS390 phones not allow to read - write eeprom via USB - here only one way is to use GW300 or GS102 RJ45 cable.

Regards, Vygis
P.S.Btw good news about GS390GO - it can be flashed with GS290 flashes-so is possible to change languages for it

Only please read eeprom and calibration backups before flashing.

jusmejose · 12-17-2010, 18:48

Phone type : LG-GS390GO
Phone IMEI : 012196-00-052577-6

Connect phone to cable-phone must be ON, if phone can't be powered connect it OFF and press Power ON and keep it pressed until
bootloader will start ... OK
----------------------------------------------------------
Loading primary loader ... OK
Loading secondary loader ... OK
Changing baudrate ... OK
Setting bus ... OK
Loading certificate ... OK
----------------------------------------------------------
Reading phone info ... OK
----------------------------------------------------------
Reading sim unlock code... OK
Found sim unlock codes :
NCK : 9979 2940 0736 4666
NSCK : 4407 2519 9892 4350
SPCK : 5710 9919 4897 7574
CCK : 0238 9506 2953 7398
SIM : 8869 5473 5844 3236
======== Process completed ========
Operation time - 00:02
----------------------------------------------------------
For operation finishing,do next :
- power phone ON with original or test SIM
- type *#865625# to enter unlock menu
- enter needed unlock code

07-14-2010, 23:30	#1 (permalink)
nicacel No Life Poster Join Date: Jan 2005 Location: Land of Lakes and Volcanoes Age: 51 Posts: 1,233 Member: 111014 Status: Offline Thanks Meter: 132	LG GS390GO from at&t supported for unlocking GS390GO from at&t just select GS290NGO model and read sim unlock code Connect phone to cable-phone must be ON, if phone can't be powered connect if OFF and press Power ON and keep it pressed until bootloader will start ... OK ---------------------------------------------------------- Loading primary loader ... OK Loading secondary loader ... OK Changing baudrate ... OK Setting bus ... OK Loading certificate ... OK ---------------------------------------------------------- Reading phone info ... OK ---------------------------------------------------------- Reading sim unlock code... OK Found sim unlock codes : NCK : 4998 2643 3766 9922 NSCK : 9433 0129 3832 9426 SPCK : 0749 9530 6747 3868 CCK : 5065 9108 6715 3462 SIM : 4751 0918 1990 9248 ======== Process completed ======== Operation time - 00:01 ---------------------------------------------------------- For operation finishing,do next : - power phone ON without SIM - type 2945#290# to enter unlock menu - enter needed unlock code then with original sim enter #865625# and enter NCK code. good luck

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can i get IMEI Number from a nokia 6185	X-plot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-10-2000 18:47
Ringtones from the charts and new Links	GM	GSM Mobile Links	0	09-26-1999 13:54
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

07-14-2010, 23:37	#2 (permalink)
nicacel No Life Poster Join Date: Jan 2005 Location: Land of Lakes and Volcanoes Age: 51 Posts: 1,233 Member: 111014 Status: Offline Thanks Meter: 132	Is this method first in the world or what?

07-15-2010, 00:50	#3 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Yes btw to enter unlock menu is needed original SIM or anyone ? Regards, Vygis

07-15-2010, 14:35	#4 (permalink)
mobitechnepal No Life Poster Join Date: Oct 2009 Location: nepal,kathmandu,New Road Posts: 638 Member: 1139381 Status: Offline Sonork: 1593399 Thanks Meter: 225	give me pinout gs390go thanks

07-15-2010, 14:37	#5 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Have you looked what cable software says to use? Regards, Vygis

07-15-2010, 14:40	#6 (permalink)
mobitechnepal No Life Poster Join Date: Oct 2009 Location: nepal,kathmandu,New Road Posts: 638 Member: 1139381 Status: Offline Sonork: 1593399 Thanks Meter: 225	yes but i don,t have gw300 rj45 cabal so need pin out

07-15-2010, 14:41	#7 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	One more time-have you looked what files you have inside "LGI_1_76SC.rar"? Regards, Vygis

07-15-2010, 19:17	#9 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Ok,thx for info Regards, Vygis

11-20-2010, 02:00	#11 (permalink)
jusmejose No Life Poster Join Date: Jul 2009 Location: Los Angeles, CA Posts: 1,923 Member: 1081371 Status: Offline Thanks Meter: 720	Connecting phone - connect USB cable to phone, phone must be OFF and without battery ... Driver connected, connecting phone ... OK ---------------------------------------------------------- Changing baudrate ... OK Setting bus ... OK Loading certificate ... Can't load certificate Operation failed

11-21-2010, 04:26	#12 (permalink)
GSM_STREET No Life Poster Join Date: Oct 2009 Location: JAM Exploring Simlock 3!!! Age: 36 Posts: 947 Member: 1149815 Status: Offline Sonork: N/A for now Thanks Meter: 218	Try GW300 cable to unlock your GS390GO phone

12-16-2010, 01:07	#14 (permalink)
vygism No Life Poster Join Date: May 2001 Location: Lithuania Posts: 5,679 Member: 4458 Status: Offline Thanks Meter: 25,853	Locked GS390 phones not allow to read - write eeprom via USB - here only one way is to use GW300 or GS102 RJ45 cable. Regards, Vygis P.S.Btw good news about GS390GO - it can be flashed with GS290 flashes-so is possible to change languages for it Only please read eeprom and calibration backups before flashing.

12-17-2010, 18:48	#15 (permalink)
jusmejose No Life Poster Join Date: Jul 2009 Location: Los Angeles, CA Posts: 1,923 Member: 1081371 Status: Offline Thanks Meter: 720	Phone type : LG-GS390GO Phone IMEI : 012196-00-052577-6 Connect phone to cable-phone must be ON, if phone can't be powered connect it OFF and press Power ON and keep it pressed until bootloader will start ... OK ---------------------------------------------------------- Loading primary loader ... OK Loading secondary loader ... OK Changing baudrate ... OK Setting bus ... OK Loading certificate ... OK ---------------------------------------------------------- Reading phone info ... OK ---------------------------------------------------------- Reading sim unlock code... OK Found sim unlock codes : NCK : 9979 2940 0736 4666 NSCK : 4407 2519 9892 4350 SPCK : 5710 9919 4897 7574 CCK : 0238 9506 2953 7398 SIM : 8869 5473 5844 3236 ======== Process completed ======== Operation time - 00:02 ---------------------------------------------------------- For operation finishing,do next : - power phone ON with original or test SIM - type *#865625# to enter unlock menu - enter needed unlock code