lg p500 dead

[tentacool]

ihave 3 pics lg P500 2 pics is unlock ok but one is dead after write P500_P503_V10_FOR_UNLOCK.crc no power, no connect nothing...
all is same version 10b
how to enter in DL mode manual?
any idea pls?

[vygism]

How to enter to emergency mode is written in "Flasher help.txt" file-also other-charge battery before,as P500 is sensitive for it's level

Regards, Vygis

[bumbalumba_1989]

Originally Posted by tentacool

ihave 3 pics lg P500 2 pics is unlock ok but one is dead after write P500_P503_V10_FOR_UNLOCK.crc no power, no connect nothing...
all is same version 10b
how to enter in DL mode manual?
any idea pls?

- for P500,P503 - press and keep pressed "Volume up"+"Return" and press "Power ON",
on LCD must appear "Emergency mode"

And charge battery before-as P500 is very sensitive for this


but this doesn't work for me...


any solution everyone ?

[vygism]

You also can try "Volume up"+"Return" and connect USB cable to phone

Regards, Vygis

[tentacool]

no boot, no power, no connect....
exist the possibility to be dead boot?

[tentacool]

I connected the LG P500 with no boot, no DL MODE, no nothing, on RJ-45 micro-UART serial cable (resistor 530) and is the only mode can connect but fail to write in it (program requires download mode) With this cable program detected P500 in normal mode without version or info about phone and imei unknown
help me if is possible!

[vygism]

If phone can't enter to DL mode-no way to help.Anyway can you test another idea-to make USB cable with 56 kOm resistor and try to connect with it

Regards, Vygis

[z_versus]

-same problem here!!
-i dont think is dead boot ,if it is ,i dont think we need j-tag,it must be a solution
-becouse ,mr.vygis dont put flash support if flashing is not safe


-this must be study Custom recovery Optimus One P500/Thunderg - Android Forums

[Burnt Cobba]

Hi all.

Is this model safe or not to unlock with this box? Was going to try it but after reading this post which has inconclusive results about the dead set I fear there is a risk that it can end up dead.

Thanks for any feedback or any follow up to this.

[tentacool]

I do not want you to understand that the blame for the failure vigys-box ..
use this key for a long time and I'm always happy

I had 3 phones sealed one died .. I noticed that every time their phone communication port installed .. prbabil program knows only ports 200 and my P500 is installed on a higher port ...
I still expect a serial flash solution

[vygism]

Guys-let I will explain situation with P500.I by self have 2 P500 and 1 P509(P509 is USA version of P500) - I flash all of them I think more than 50 times when was making flashing for them and also when was testing flash files-and all time phones been OK-anyway I killed one P500 by writing to it P500h flash-seems,that these phones-I mean P500 and P500h differs a little by hardware-anyway I placed at supports info,that is impossible to flash P500h phone with P500 flashes.Also other-I only can guess,that maybe something is wrong in case,if phone allows boots overwriting-in practice only less than 1% of phones allows this-they as rule are first phones from one one other series.But my P509 is also such phone-and boots overwriting on it works OK also.Anyway today uploaded to supports LGQ_1_67SC already skips boots overwriting even if phone allow it.So for finishing-I would say,that LGQ_1_67SC is already safe,but it is your choice what to do as all Qualcomm based phones are problematic-you can kill them and using LG online updater or LGDP - LG factory flasher.

Regards, Vygis

[Burnt Cobba]

Originally Posted by vygism

Guys-let I will explain situation with P500.I by self have 2 P500 and 1 P509(P509 is USA version of P500) - I flash all of them I think more than 50 times when was making flashing for them and also when was testing flash files-and all time phones been OK-anyway I killed one P500 by writing to it P500h flash-seems,that these phones-I mean P500 and P500h differs a little by hardware-anyway I placed at supports info,that is impossible to flash P500h phone with P500 flashes.Also other-I only can guess,that maybe something is wrong in case,if phone allows boots overwriting-in practice only less than 1% of phones allows this-they as rule are first phones from one one other series.But my P509 is also such phone-and boots overwriting on it works OK also.Anyway today uploaded to supports LGQ_1_67SC already skips boots overwriting even if phone allow it.So for finishing-I would say,that LGQ_1_67SC is already safe,but it is your choice what to do as all Qualcomm based phones are problematic-you can kill them and using LG online updater or LGDP - LG factory flasher.

Regards, Vygis

Ok great so 1.67 is the safe bet then. Its the same story of Samsung ones like F480 etc then. Dead boot = dead set .

Thanks for the info guys

[z_versus]

Originally Posted by vygism

Guys-let I will explain situation with P500.I by self have 2 P500 and 1 P509(P509 is USA version of P500) - I flash all of them I think more than 50 times when was making flashing for them and also when was testing flash files-and all time phones been OK-anyway I killed one P500 by writing to it P500h flash-seems,that these phones-I mean P500 and P500h differs a little by hardware-anyway I placed at supports info,that is impossible to flash P500h phone with P500 flashes.Also other-I only can guess,that maybe something is wrong in case,if phone allows boots overwriting-in practice only less than 1% of phones allows this-they as rule are first phones from one one other series.But my P509 is also such phone-and boots overwriting on it works OK also.Anyway today uploaded to supports LGQ_1_67SC already skips boots overwriting even if phone allow it.So for finishing-I would say,that LGQ_1_67SC is already safe,but it is your choice what to do as all Qualcomm based phones are problematic-you can kill them and using LG online updater or LGDP - LG factory flasher.

Regards, Vygis

-ok ...,we have a safe version now,this is great!!!
-but what we do with dead phones??? we dont write p500h file we write P500_P503_V10_FOR_UNLOCK.crc
-why you dont write to LGQ_1_64SC ''THIS IS NOT SAFE - DO IT ON YOUR OWN RISK'' like a free software

[bumbalumba_1989]

Originally Posted by z_versus

-ok ...,we have a safe version now,this is great!!!
-but what we do with dead phones??? we dont write p500h file we write P500_P503_V10_FOR_UNLOCK.crc
-why you dont write to LGQ_1_64SC ''THIS IS NOT SAFE - DO IT ON YOUR OWN RISK'' like a free software

that's right ... i had to buy a new one for the client.....
i understand that it's a new model ... and it's problematic... but you have to offer us a valid solution ...you can't just test your software with our phones

[z_versus]

-so how much we must wait mr.vygism to make our phones work???
-we are still waiting your solution!!