How? Why? Samsung S7330 - STRAIGHT ANSWERS PLEASE - GSM-Forum

mushy408 · 03-19-2009, 15:32

This S7330 is driving me mad...
I've been and bought the RJ45/USB combo cable from fonefunshop.

I've followed every bit of information that I can find and I still cannot get the phone to unlock. I have just flashed with the XXHK1 firmware - NO PROBLEMS
I have just reset the Sim Lock & Phone Lock - NO PROBLEMS

I click the unlock button, phone is powered on with sim - then connect the cable...

Checking serial communication...
Operation failed!

The samsung CDMA modem is installed on COM8. I have tried punching in *#782872# and *#726872# then connecting the cable and still get the same result.
I have also tried on my laptop, fresh install of XP SP3 and NSPRO v5.0.8 - EXACTLY SAME PROBLEM

Surely the cable is working correctly as I can flash/service?

I have it connected to a seperate USB to avoid the "USB Hub power exceeded" and have the RJ45 connected into the NSPro box.

Am I missing something here? Lots of people have said "try this tested by me..." but nothing works...

Elco · 03-19-2009, 16:07

use NsPro E210 or NsPro C450 cable to unlock that phone.
The phone must be in Samsung USB mode to be unlocked.

hemsie · 04-28-2009, 14:27

how to unlock using r45 cable E210.

hemsie · 04-28-2009, 14:38

when try to unlock, it says successfully unlocked, BUT PHONE still unlocked

Elco · 04-28-2009, 16:37

Quote:

Originally Posted by hemsie

when try to unlock, it says successfully unlocked, BUT PHONE still unlocked

So where is the problem?

hemsie · 04-28-2009, 18:22

Quote:

Originally Posted by elco

so where is the problem?

but phone is still locked.

Elco · 04-28-2009, 20:02

Quote:

Originally Posted by hemsie

but phone is still locked.

Perform a full reset using code: *2767*3855# then try again.

hemsie · 04-29-2009, 08:10

i tried but i think phone also has lock code. As soon i put phone on, it asks for unlock code. i tried to READ INFO with NS PRO but it does not detect phone. Only detect phone when i do UNLOCK

Elco · 04-29-2009, 08:13

Quote:

Originally Posted by hemsie

i tried but i think phone also has lock code. As soon i put phone on, it asks for unlock code. i tried to READ INFO with NS PRO but it does not detect phone. Only detect phone when i do UNLOCK

Set the phone in PC Studio USB mode.

When you connect powered on phone to NsPro E210 cable, the phone should be detected as SAMSUNG CDMA MODEM on device manager.

Then you can use GET INFO function to read the phone code.

Or you can clear the phone code by flashing.

kikikokoki · 04-29-2009, 08:48

good info mr elco................

03-19-2009, 15:32	#1 (permalink)
mushy408 Insane Poster Join Date: Dec 2005 Posts: 62 Member: 209886 Status: Offline Thanks Meter: 4	How? Why? Samsung S7330 - STRAIGHT ANSWERS PLEASE This S7330 is driving me mad... I've been and bought the RJ45/USB combo cable from fonefunshop. I've followed every bit of information that I can find and I still cannot get the phone to unlock. I have just flashed with the XXHK1 firmware - NO PROBLEMS I have just reset the Sim Lock & Phone Lock - NO PROBLEMS I click the unlock button, phone is powered on with sim - then connect the cable... Checking serial communication... Operation failed! The samsung CDMA modem is installed on COM8. I have tried punching in #782872# and #726872# then connecting the cable and still get the same result. I have also tried on my laptop, fresh install of XP SP3 and NSPRO v5.0.8 - EXACTLY SAME PROBLEM Surely the cable is working correctly as I can flash/service? I have it connected to a seperate USB to avoid the "USB Hub power exceeded" and have the RJ45 connected into the NSPro box. Am I missing something here? Lots of people have said "try this tested by me..." but nothing works...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need to unlock my Samsung S7330. Someone please help!	aysh786az	Samsung Flashers, Software, Firmware.	1	09-21-2009 15:29
how know samsung S179 usb pinouts please	mobayk	Various CDMA/TDMA Cell Phones	0	01-24-2009 16:32
straight answer please	mickle1	Universalbox	7	12-02-2008 07:35
Does anyone give a straight answer on these threads ????	thomastren	Samsung Hardware Repair	0	12-21-2007 13:53
Is Z310i unlock possible or not? - Straight answer please	Seedy	Universalbox	6	08-14-2007 09:28

03-19-2009, 16:07	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	use NsPro E210 or NsPro C450 cable to unlock that phone. The phone must be in Samsung USB mode to be unlocked.

04-28-2009, 14:27	#3 (permalink)
hemsie No Life Poster Join Date: Nov 2003 Location: HEMSIE CYBER BOUTIK MAURITIUS Age: 63 Posts: 584 Member: 43940 Status: Offline Thanks Meter: 27	how to unlock using r45 cable E210.

04-28-2009, 14:38	#4 (permalink)
hemsie No Life Poster Join Date: Nov 2003 Location: HEMSIE CYBER BOUTIK MAURITIUS Age: 63 Posts: 584 Member: 43940 Status: Offline Thanks Meter: 27	when try to unlock, it says successfully unlocked, BUT PHONE still unlocked

04-29-2009, 08:10	#8 (permalink)
hemsie No Life Poster Join Date: Nov 2003 Location: HEMSIE CYBER BOUTIK MAURITIUS Age: 63 Posts: 584 Member: 43940 Status: Offline Thanks Meter: 27	i tried but i think phone also has lock code. As soon i put phone on, it asks for unlock code. i tried to READ INFO with NS PRO but it does not detect phone. Only detect phone when i do UNLOCK

04-29-2009, 08:48	#10 (permalink)
kikikokoki No Life Poster Join Date: Apr 2008 Location: GSM Philippines Age: 38 Posts: 955 Member: 748785 Status: Offline Sonork: KIKO_GSM Thanks Meter: 309	good info mr elco................