I Can't Unlock Any Of The Z Series 3g With Ns Dongle - GSM-Forum

erickxson · 01-23-2006, 23:25

Hello Elco for some reason i can't unlock any of the Samsung Z series with the NS DONGLE or the BOX it gives me an error

Searching for phone
Phone not found!

if i put the phone without battery the box does not power it up!

elco what can i do?

Elco · 01-24-2006, 05:12

Connect powered off phone(with battery) to cable
Phone must power on.
Start the software. Select hone model, install drivers and use UNLOCK function.

damabib · 01-24-2006, 15:19

u have driver problem use search or pm me

intouchce · 01-24-2006, 20:48

Hi, I had the same problem.

ensure you are using a Z500 usb cable and the drivers are fully installed for the cable. I nicked one from a Z140 phone, the drivers come with the handset on the red disk. You can also download the drivers from the support section.

It does work 100 %

Good luck

Seedy · 01-24-2006, 22:28

I have had this problem since I bought NSD ! Just cannot get it to work

Works 100000% with the CRACKED NSD but does not work with the original NSD. I have done everything exactly as stated in manual and website but still nothing

I also reformatted my HD when the NTDLR thing happened and tried after that and still same problem

Sorry to say but NSD are no help at all in this matter - a complete waste of time !!

unlockcellular2 · 01-24-2006, 22:44

seedy, its possible u have a bad z500 cable...try to test with different cable..

erickxson · 01-25-2006, 06:27

GUNAWAN I bought the boxes from you i have afew of them and to tell you the thruth i think is the cable what can we do about it? i have the USB and the NSD BOX cables.

Seedy · 01-27-2006, 01:54

Just tried a Z500 with original cable that came with the box and guess what...

Searching for phone...
Phone not found!

And with the cracked NSD version...found the codes in 15 secs !

AmirGSM · 01-27-2006, 09:36

Quote:

Originally Posted by Seedy

Just tried a Z500 with original cable that came with the box and guess what...
Searching for phone...
Phone not found!
And with the cracked NSD version...found the codes in 15 secs !

hi
if u use the original cable u have to look at modem driver if right installed
if u have it as (samsungmodem#2)thats mean u have to reinstall it after delet old one,and chose the the right com port
hope thats help
best regards

unlockcellular2 · 01-27-2006, 16:02

send us email and we can take care of it.

Quote:

Originally Posted by erickxson

GUNAWAN I bought the boxes from you i have afew of them and to tell you the thruth i think is the cable what can we do about it? i have the USB and the NSD BOX cables.

MEDIATRONIC · 01-27-2006, 20:31

you can use usb+com lg3G cable
also it is necessary to make a short circuit between pine 2 and 3 of port com1 and to instal
look at modem driver if right installed
l the usb driver of z105

Elco · 01-27-2006, 23:47

Quote:

Originally Posted by MEDIATRONIC

you can use usb+com lg3G cable

CORRECT

Quote:

Originally Posted by MEDIATRONIC

also it is necessary to make a short circuit between pine 2 and 3 of port com1

WRONG!!!
Nsdongle dont need that. PLZ read my instructions. You dont have to short pin 2,3 on com port if you use Nsdongle. I have posted that so many times...
dont tuch the COM settings

Quote:

Originally Posted by MEDIATRONIC

look at modem driver if right installed
l the usb driver of z105

read the Zxxx trubleshoting from support zone

tical · 01-29-2006, 12:34

remember, the port number has to be less than 9. if your modem is com 10 or greater it will NOT work

Elco · 01-29-2006, 17:20

Yes it work on Nsdongle if driver is correctly installed. Nsdongle is NOT winimei.

01-23-2006, 23:25	#1 (permalink)
erickxson Freak Poster Join Date: Dec 2003 Location: IN A BEAUTIFULL ISLAND Posts: 106 Member: 45572 Status: Offline Thanks Meter: 5	I Can't Unlock Any Of The Z Series 3g With Ns Dongle Hello Elco for some reason i can't unlock any of the Samsung Z series with the NS DONGLE or the BOX it gives me an error Searching for phone Phone not found! if i put the phone without battery the box does not power it up! elco what can i do?

01-24-2006, 20:48	#4 (permalink)
intouchce Freak Poster Join Date: Jan 2005 Location: www.themobilephonesite.com Age: 44 Posts: 200 Member: 105154 Status: Offline Thanks Meter: 2	USB cable and drivers Hi, I had the same problem. ensure you are using a Z500 usb cable and the drivers are fully installed for the cable. I nicked one from a Z140 phone, the drivers come with the handset on the red disk. You can also download the drivers from the support section. It does work 100 % Good luck

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i can't unlock all of the phone, but read info ok, pleaese help.	kaholukkk	MT-BOX	5	10-20-2009 15:14
Can't solve X480 startup problems with NS dongle	chrisonic	NSPRO	3	05-20-2006 17:44
Can't unlock e340e and flash with Ns dongle	MR_DMC	NSPRO	1	10-28-2005 11:01
What are the alligator clips used for on some of the cables that came with NS Dongle?	wirelessxpert	NSPRO	5	08-24-2005 11:09

01-24-2006, 05:12	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Connect powered off phone(with battery) to cable Phone must power on. Start the software. Select hone model, install drivers and use UNLOCK function.

01-24-2006, 15:19	#3 (permalink)
damabib No Life Poster Join Date: Jan 2005 Location: EVERYWHERE U GO Age: 46 Posts: 4,800 Member: 106026 Status: Offline Sonork: 100.77890 Thanks Meter: 127	u have driver problem use search or pm me

01-24-2006, 22:28	#5 (permalink)
Seedy No Life Poster Join Date: Dec 2001 Posts: 1,175 Member: 8102 Status: Offline Thanks Meter: 118	I have had this problem since I bought NSD ! Just cannot get it to work Works 100000% with the CRACKED NSD but does not work with the original NSD. I have done everything exactly as stated in manual and website but still nothing I also reformatted my HD when the NTDLR thing happened and tried after that and still same problem Sorry to say but NSD are no help at all in this matter - a complete waste of time !!

01-24-2006, 22:44	#6 (permalink)
unlockcellular2 Freak Poster Join Date: Oct 2005 Location: www.unlockcellular.com Age: 43 Posts: 180 Member: 187536 Status: Offline Thanks Meter: 2	seedy, its possible u have a bad z500 cable...try to test with different cable..

01-25-2006, 06:27	#7 (permalink)
erickxson Freak Poster Join Date: Dec 2003 Location: IN A BEAUTIFULL ISLAND Posts: 106 Member: 45572 Status: Offline Thanks Meter: 5	GUNAWAN I bought the boxes from you i have afew of them and to tell you the thruth i think is the cable what can we do about it? i have the USB and the NSD BOX cables.

01-27-2006, 01:54	#8 (permalink)
Seedy No Life Poster Join Date: Dec 2001 Posts: 1,175 Member: 8102 Status: Offline Thanks Meter: 118	Just tried a Z500 with original cable that came with the box and guess what... Searching for phone... Phone not found! And with the cracked NSD version...found the codes in 15 secs !

01-27-2006, 20:31	#11 (permalink)
MEDIATRONIC Insane Poster Join Date: Dec 2005 Posts: 92 Member: 206148 Status: Offline Thanks Meter: 3	you can use usb+com lg3G cable also it is necessary to make a short circuit between pine 2 and 3 of port com1 and to instal look at modem driver if right installed l the usb driver of z105

01-29-2006, 12:34	#13 (permalink)
tical No Life Poster Join Date: Nov 2003 Location: Americas Age: 44 Posts: 2,220 Member: 43802 Status: Offline Thanks Meter: 36	remember, the port number has to be less than 9. if your modem is com 10 or greater it will NOT work

01-29-2006, 17:20	#14 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Yes it work on Nsdongle if driver is correctly installed. Nsdongle is NOT winimei.