I9300 repair IMEI , SN , No network registered - GSM-Forum

invitor · 06-21-2013, 09:24

Samsung I9300 Galaxy S3 repair manual
(repair imei, s/n , no network registered)

1. flash with I9300XXBLFB_I9300OXFBLF1_I9300XXLFB_HOME.tar.md5

2. flash with I9300_EFS.tar.md5 from NS-Pro support (I9300_IMEI_Baseband_Repair)

3. repair imei & SN with NS-Pro

don't forget say 10x

hacktek · 06-23-2013, 11:06

Quote:

Originally Posted by invitor

Samsung I9300 Galaxy S3 repair manual
(repair imei, s/n , no network registered)

1. flash with I9300XXBLFB_I9300OXFBLF1_I9300XXLFB_HOME.tar.md5

2. flash with I9300_EFS.tar.md5 from NS-Pro support (I9300_IMEI_Baseband_Repair)

3. repair imei & SN with NS-Pro

don't forget say 10x

You must be wrong...
Rooting the phone must be done BEFORE repairing IMEI & SN. You can not repair IMEI without ROOT. So please verify again the whole operations before posting!!
... and what is that ariza_JBv02 ?? Why do we need that, if the IMEI & SN repair operation was successfull???

CHAUDHRAY ARSHAD · 06-23-2013, 11:08

Quote:

Originally Posted by invitor

Samsung I9300 Galaxy S3 repair manual
(repair imei, s/n , no network registered)

1. flash with I9300XXBLFB_I9300OXFBLF1_I9300XXLFB_HOME.tar.md5

2. flash with I9300_EFS.tar.md5 from NS-Pro support (I9300_IMEI_Baseband_Repair)

3. repair imei & SN with NS-Pro

don't forget say 10x

download root file from support 1st root then change imi will be ok

hacktek · 06-23-2013, 11:13

Quote:

Originally Posted by CHAUDHRAY ARSHAD

download root file from support 1st root then change imi will be ok

OK, I know.. but what is ariza_JBv02??
and what about the I9300 versions wich can not go on UART mode with RJ45 cable, even with 150K, 530K, 560K, 619K resistor?

tauheed9 · 06-23-2013, 21:46

The problem is with your cable. Please use correct Samsung C3300k/C3303k Micro UART cable with 525-530 kOhm resistor inside.
Try with another cable.

hacktek · 06-26-2013, 11:14

Quote:

Originally Posted by tauheed9

The problem is with your cable. Please use correct Samsung C3300k/C3303k Micro UART cable with 525-530 kOhm resistor inside.
Try with another cable.

No, threre is not the cable... Cable is good, I can execute operations on all other phone with that cable.

For the I9300 with hardware ver.: MP 1.100 it will not work. Operation failed..

06-21-2013, 09:24	#1 (permalink)
invitor Freak Poster Join Date: Oct 2005 Location: Bulgaria Posts: 283 Member: 188794 Status: Offline Thanks Meter: 39	I9300 repair IMEI , SN , No network registered Samsung I9300 Galaxy S3 repair manual (repair imei, s/n , no network registered) 1. flash with I9300XXBLFB_I9300OXFBLF1_I9300XXLFB_HOME.tar.md5 2. flash with I9300_EFS.tar.md5 from NS-Pro support (I9300_IMEI_Baseband_Repair) 3. repair imei & SN with NS-Pro don't forget say 10x Last edited by Elco; 06-24-2013 at 10:58.

06-23-2013, 21:46	#5 (permalink)
tauheed9 Banned Join Date: May 2012 Location: in ur heart Age: 32 Posts: 1,780 Member: 1761678 Status: Offline Sonork: 100.1615439 Thanks Meter: 370	The problem is with your cable. Please use correct Samsung C3300k/C3303k Micro UART cable with 525-530 kOhm resistor inside. Try with another cable.