Install problem Nspro v3.2.0 - GSM-Forum

tonydvd · 07-19-2007, 12:44

Hi all,
New here and don't know what to do.
Just recieved my brand new Nspro box and installed v3.2.0.
Installation was oke, but when I start the prog. it freeze at
Nsteam window.
I am lost now, drvers seems to be oke.

Thanks for help.

REMO · 07-19-2007, 12:53

may be box need update open internet and open exe.

tonydvd · 07-19-2007, 13:02

@Rasheed,
What you mean by "open exe".

Thanks

tonydvd · 07-19-2007, 13:06

There is no install instructions even not at the nsteam website.

DAVI_1 · 07-19-2007, 15:57

Quote:

Originally Posted by tonydvd

There is no install instructions even not at the nsteam website.

of course there is...
look , here are oll posible problems solutions for ns-pro box/program
http://www.nsdongle.com/forum/index....ic,3757.0.html
http://www.nsdongle.com/forum/index....pic,246.0.html
http://www.nsdongle.com/forum/index....ic,2199.0.html
http://www.nsdongle.com/forum/index....pic,265.0.html
....

tonydvd · 07-19-2007, 17:36

Thanks,
I already found the problem, card was not fitted so well.
Now i am glad cause works very good and unlocked 2 C300.
If you push card totally inside the holder then it don't work.
I think is known already.

Elco · 07-19-2007, 17:49

Quote:

Originally Posted by tonydvd

Thanks,
I already found the problem, card was not fitted so well.
Now i am glad cause works very good and unlocked 2 C300.
If you push card totally inside the holder then it don't work.
I think is known already.

Actualy, the card should stay like this:

Not completly inserted into the box (for last NsPro box hw revision)
If you pushed the card completly into the box, you broken the end grooves of the card reader.

tonydvd · 07-19-2007, 18:01

Thanks Elco,
It's now like on the picture. Recieved from factory with smal tape and was
inerted totally.

Anyway it works now.

07-19-2007, 12:44	#1 (permalink)
tonydvd Junior Member Join Date: May 2007 Location: Netherlands Age: 76 Posts: 25 Member: 513276 Status: Offline Thanks Meter: 0	Install problem Nspro v3.2.0 Hi all, New here and don't know what to do. Just recieved my brand new Nspro box and installed v3.2.0. Installation was oke, but when I start the prog. it freeze at Nsteam window. I am lost now, drvers seems to be oke. Thanks for help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NsPro v3.2.0 released:	Elco	NSPRO	80	07-19-2007 22:16

07-19-2007, 12:53	#2 (permalink)
REMO No Life Poster Join Date: Jan 2004 Posts: 705 Member: 49339 Status: Offline Thanks Meter: 93	may be box need update open internet and open exe.

07-19-2007, 13:02	#3 (permalink)
tonydvd Junior Member Join Date: May 2007 Location: Netherlands Age: 76 Posts: 25 Member: 513276 Status: Offline Thanks Meter: 0	@Rasheed, What you mean by "open exe". Thanks

07-19-2007, 13:06	#4 (permalink)
tonydvd Junior Member Join Date: May 2007 Location: Netherlands Age: 76 Posts: 25 Member: 513276 Status: Offline Thanks Meter: 0	There is no install instructions even not at the nsteam website.

07-19-2007, 17:36	#6 (permalink)
tonydvd Junior Member Join Date: May 2007 Location: Netherlands Age: 76 Posts: 25 Member: 513276 Status: Offline Thanks Meter: 0	Thanks, I already found the problem, card was not fitted so well. Now i am glad cause works very good and unlocked 2 C300. If you push card totally inside the holder then it don't work. I think is known already.

07-19-2007, 18:01	#8 (permalink)
tonydvd Junior Member Join Date: May 2007 Location: Netherlands Age: 76 Posts: 25 Member: 513276 Status: Offline Thanks Meter: 0	Thanks Elco, It's now like on the picture. Recieved from factory with smal tape and was inerted totally. Anyway it works now.