NSJTAG help to recover 804SS - GSM-Forum

coolgsm007 · 11-13-2008, 19:02

Hi Mates

already my technician have killed severel phone while flashing the boot, so i boght the NSJTAG to recover the phones, but still i dont know that how to operate the box and recover those phone,

please help me.

thankyou
coolgsm007

Elco · 11-13-2008, 19:12

NsJtag box must be connected to NsPro box using RJ45 to RJ45 cable.
Then the phone must be connected to NsJtag box using the correct cable for that model.
The NsJtag software give you instructions what cable to use.
On Z540, V804SS phones, the Jtag connector is on phone PCB so you must open the phone to connect it to NsJtag.
After connecting the phone to NsJtag, write Z540 boot on that phone.
Then disconnect the phone from NsJtag and puth the phone in download mode by pressing 9+power on key.
Then connect the phone to NsPro and flash the phone with Z540 firmware.

coolgsm007 · 11-13-2008, 19:17

thank for the fast reply ill try and post the log

thankyou
coolgsm007

11-13-2008, 19:02	#1 (permalink)
coolgsm007 Freak Poster Join Date: Jan 2008 Posts: 128 Member: 669050 Status: Offline Thanks: 15 Thanked 30 Times in 19 Posts	NSJTAG help to recover 804SS Hi Mates already my technician have killed severel phone while flashing the boot, so i boght the NSJTAG to recover the phones, but still i dont know that how to operate the box and recover those phone, please help me. thankyou coolgsm007

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
6630 killed by UB - Need help to recover	JezH	Universalbox	4	11-06-2009 18:16
How do i get help to recover file reg i lost	tecnicelltech	VygisToolbox	1	09-01-2009 21:35
Help To Recover L6	neo_49	Ultima Box Light	0	03-02-2007 06:57
pls help to recover dead V3	ktele	Smart-Clip	1	09-29-2006 08:58

11-13-2008, 19:12	#2 (permalink)
Elco Product Supporter Join Date: Dec 2002 Location: Romania Posts: 9,688 Member: 19254 Status: Offline Sonork: 100.72990 Thanks: 1 Thanked 23,723 Times in 1,343 Posts	NsJtag box must be connected to NsPro box using RJ45 to RJ45 cable. Then the phone must be connected to NsJtag box using the correct cable for that model. The NsJtag software give you instructions what cable to use. On Z540, V804SS phones, the Jtag connector is on phone PCB so you must open the phone to connect it to NsJtag. After connecting the phone to NsJtag, write Z540 boot on that phone. Then disconnect the phone from NsJtag and puth the phone in download mode by pressing 9+power on key. Then connect the phone to NsPro and flash the phone with Z540 firmware.

11-13-2008, 19:17	#3 (permalink)
coolgsm007 Freak Poster Join Date: Jan 2008 Posts: 128 Member: 669050 Status: Offline Thanks: 15 Thanked 30 Times in 19 Posts	thank for the fast reply ill try and post the log thankyou coolgsm007