NsPro Wrong smart card id

[salu g]

Hi All respected members and BoX owner,

my nspro running fine i just close exe and open after 20 mint then i got this error

NsPro Wrong smart card id

pls help me

[allttar]

Originally Posted by salu g

Hi All respected members and BoX owner,

my nspro running fine i just close exe and open after 20 mint then i got this error

NsPro Wrong smart card id

pls help me

plus erore mesage

Here are de******ions of NsPro error messages and solutions for that ewrrors:

NsPro Axalto card not found (error 0x01) = Smartcard is not detected by ******s.
Solutions:
1.Check if smartcard drivers are correctly installed. A new version of smartcard drivers can be found HERE
2.Check if the card is correctly connected into the card reader inside the box.

NsPro Axalto card not found (error 0x02) = corrupted card
NsPro Axalto card not found (error 0x03) = corrupted card
Solution:
Can be repaired by using this software

NsPro Axalto card not found (error 0x04) = damaged card
Solution:
Send the card back to reseller or distribuitor Unlockcellular for replacement

NsPro box /port not found...
Solution:
Install the drivers from Program Files\NsPro\NsPro Driver folder from your PC

Runtime error
Solution:
Reinstall last software version and confirm all installation steps.
If problem persist, go to Program Files\NsPro\NsPro Driver folder and import "Exception.reg" file into ******s Regedit tool

Connection Establishing failed 100xx
Solution:
Make sure that you use last NsPro version from : : NsPro : :
Allow from firewall to NsPro to connect to internet (server) for updating the card.
Or simply disable ******s firewall from control panel.You can reactivate firewall after update was completed.


Update not allowed on NsMultiUnlock = you have not buyed NsMultiUnlock activation.
After you buy activation and reseller will activate your card ID on server, you will be able to run the software.

"USB Power Exceed" message on ******s when you connect Zxxx phone to NsPro
Solution:
Build and use NsPro Zxxx cable adapter. You can find adapter schematic on NsPro support area.

"Device not found!"
or
Failed to initiate NsPro Box device!
Please update NsPro drivers!

The NsPro drivers are not correctly installed.

Solution:
1.Uninstall older nspro version
2.Delete nspro folder from program files
3.Uninstall nspro box drivers from PC Device manager
4.Download and install last nspro version from : : NsPro : :
5.Reconnect nspro box to PC USB port and install the drivers manualy acording to this tutorial:
Untitled Document
NsPro drivers can be found on NsPro Driver folder on your PC

[salu g]

Thanks for Guide i use nsPro exe then i got error don't send i close exe after that shown this msg

[Haicha]

Originally Posted by salu g

Thanks for Guide i use nsPro exe then i got error don't send i close exe after that shown this msg

Update Drivers in Device Manager.Or uninstall and install again.
Regards
Haicha

[salu g]

Thanks for reply Sir,
But i already did this

[salu g]

What the Hel is this Wrong where is NsPro admin

[salu g]

is NsPro team is Dead .. ?

[Naeem123e]

Brother wash tha smart card jack new downloud driver thenkssssssssss instal setup ok

[salu g]

Where is Fukin nsPro Team i make this thread at 08-24-11, 12:34 PM no one can give me reply of this **** fault Fukin Team Go to He l l

[Elco]

Wrong smartcard ID = your card was blocked by your reseller for cheating on activation payment (paypal cheat)

The only one who can restore your card status is the reseller who blocked the card.

[salu g]

lol i just buy this box about 4 month ago with bank transfer payment ) you have no solution for this error :-j no need nsPro i buy Z3x :P
u just copy solution from Z3X Box