please add support for e1205 - GSM-Forum

alberto_fiol · 10-18-2012, 17:09

please add support for e1205 flash and unlock.

this model is very common in my area.

thank you

Elco · 10-18-2012, 19:21

Try to unlock it as E1200 on NsPro and post the results.

Digi74 · 10-22-2012, 08:23

Connect the phone to cable and press Power key for 10 seconds
Processing...
Operation failed!

alberto_fiol · 10-22-2012, 11:20

flasing not supported

wkris · 11-26-2012, 08:27

Unlocking also!For all firmwares.

Elco · 11-26-2012, 11:50

Make sure you are using NsPro v6.5.2
Phone powered off, with battery inside.
Select E1200 and click UNLOCK.
Then connect the phone to NsPro cable and press Power On key.

omarSA · 12-19-2012, 14:06

Selecting as you saay works 100 %. Did 1 unit today.
If saying failed....try a few times. I tried about 5 times before success.

alberto_fiol · 12-19-2012, 17:17

Still no flashing, and that is what I needed most

Men7896 · 12-27-2012, 08:36

Quote:

Originally Posted by Elco

Make sure you are using NsPro v6.5.2
Phone powered off, with battery inside.
Select E1200 and click UNLOCK.
Then connect the phone to NsPro cable and press Power On key.

Hihi..
There is only info button bright for click,
others all grey...
and after read successfully..
it shows wrong code when key in the read code.
Pls chk
Thanks in advance
BR

cellz · 05-21-2013, 16:19

Quote:

Originally Posted by Elco

Make sure you are using NsPro v6.5.2
Phone powered off, with battery inside.
Select E1200 and click UNLOCK.
Then connect the phone to NsPro cable and press Power On key.

ELCO How about add flash support for e1205L?

10-18-2012, 17:09	#1 (permalink)
alberto_fiol Freak Poster Join Date: Jul 2003 Location: Tijuana Age: 49 Posts: 122 Member: 34809 Status: Offline Thanks Meter: 5	please add support for e1205 please add support for e1205 flash and unlock. this model is very common in my area. thank you

12-19-2012, 14:06	#7 (permalink)
omarSA Insane Poster Join Date: Jan 2006 Posts: 95 Member: 218868 Status: Offline Thanks Meter: 5	this method works Selecting as you saay works 100 %. Did 1 unit today. If saying failed....try a few times. I tried about 5 times before success.

10-18-2012, 19:21	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Try to unlock it as E1200 on NsPro and post the results.

10-22-2012, 08:23	#3 (permalink)
Digi74 Insane Poster Join Date: May 2009 Posts: 80 Member: 1026404 Status: Offline Thanks Meter: 5	Connect the phone to cable and press Power key for 10 seconds Processing... Operation failed!

10-22-2012, 11:20	#4 (permalink)
alberto_fiol Freak Poster Join Date: Jul 2003 Location: Tijuana Age: 49 Posts: 122 Member: 34809 Status: Offline Thanks Meter: 5	flasing not supported

11-26-2012, 08:27	#5 (permalink)
wkris Freak Poster Join Date: Oct 2004 Location: Bulgaria, Sofia Age: 47 Posts: 147 Member: 86488 Status: Offline Thanks Meter: 19	Unlocking also!For all firmwares.

11-26-2012, 11:50	#6 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Make sure you are using NsPro v6.5.2 Phone powered off, with battery inside. Select E1200 and click UNLOCK. Then connect the phone to NsPro cable and press Power On key.

12-19-2012, 17:17	#8 (permalink)
alberto_fiol Freak Poster Join Date: Jul 2003 Location: Tijuana Age: 49 Posts: 122 Member: 34809 Status: Offline Thanks Meter: 5	Still no flashing, and that is what I needed most