S5603 IMEI change not success !!!

[abdola]

Hi friends

i'm trying to Change IMEI for S5603 with no success, i'm using NSpro 5.7.8
i get the following message

Checking serial communication...
Reading data...
Operation failed!

just to mention that i performed Get Info with no problem

Thanks

[abdola]

no one own or tried to Change IMEI for S5600 before?!!!!

[abdola]

Mr Elco, where to get some support for the NSpro box?

[abdola]

The problem solved,
I will purchase Z3X box to change the IMEI for S5600 and other models without any effort

Thanks for NSPro team support

bye bye

[abdola]

Originally Posted by abdola

The problem solved,
I will purchase Z3X box to change the IMEI for S5600 and other models without any effort

Thanks for NSPro team support

bye bye

you are impudent NSPro team, you just know to sell your feckless Box, and your customers (include me) have to toady to you t get some support that undoubtedly they will not get.
you know' ,your Box don't justify your behavor and belive me, the way out is to easy, we can found more useful boxes than the NSPro

[THE CLASH]

Try putting a different firmware on the Phone, then Try again..

[abdola]

Originally Posted by THE CLASH

Try putting a different firmware on the Phone, then Try again..

Elco, please delete this thread

[THE CLASH]

And whats your Problem,, cant you Flash the mobile,, or have you just Discovered that
S5603 is not listed, and you feel silly..

[abdola]

Originally Posted by THE CLASH

And whats your Problem,, cant you Flash the mobile,, or have you just Discovered that
S5603 is not listed, and you feel silly..

i 'm trying to flash the phone with the special firmware to be able to change the IMEI, and always get the following message

Reading file acknowledge faile!


Writing ModemCode file
Proceeding with file...
Press NEXT to continue...

[bcatlock1]

Originally Posted by abdola

i 'm trying to flash the phone with the special firmware to be able to change the IMEI, and always get the following message

Reading file acknowledge faile!


Writing ModemCode file
Proceeding with file...
Press NEXT to continue...

i also get exactly the same as above and this on S5600 orange uk.
tried flashing bootcore as well 1st,,
just get 8% showing on mob,left it connectedflash again,this time done 100% show on mob,,,but nspro show failed.left 3min with batt in..took batt off place batt back,into download mode
flash
all i get is
writing modem code file
proceeding with file...
press next

mob show 0% written.
mob powers on though,as if nothing at all has been done to it...
it very strange

thats using latest nspro v5.7.8
quallcom all ok plus samsung drivers ok

[bcatlock1]

fixed using multiloader v5.56
just select msm6280
tick boot show it nspro boot files
mob in download mode
attach cable,it show in bottom of multiloader,click download,take couple secs,,done(mob will b flashing screen,,disconnect from cable,,(mob show flashing pink screen,,,leave like that for 3min(dont take batt out-leave it in for 3min).
then take batt out after 3min
then into download mode again,,
untick boot on multiloader
show it wher the flash files for nspro is,attach to cable,,,
click download,,,flashes no problem at all
heres the multiloader that i used:

http://hotfile.com/dl/69545244/90eb9cc/MultiLoader_V5.56.rar.html

[AFZALHASMI]

done with z3x use qulcom code *#782872# go to samsung tool select imei done