S8300 Imei Repair - GSM-Forum

smp_comms · 04-24-2009, 11:21

Hi am unable to repair the imei on the above handset. I am able to read codes and unlock after I flashed files from support but am unable to repair imei, keep getting operation failed! Any solution to this problem?

cheers
stuart

Elco · 04-24-2009, 14:04

Where exactly you get operation failed ?
PLZ post here the EXACT MESSAGES from nspro log window.

smp_comms · 04-25-2009, 11:55

Checking serial communication...
Operation failed!

Then when I retry operation get Operation failed! immediately

Elco · 04-25-2009, 12:18

Quote:

Originally Posted by smp_comms

Checking serial communication...
Operation failed!

Then when I retry operation get Operation failed! immediately

After entering that code, tick "CONFIRM" on the phone and disconnect and reconnect the phone from cable.
Then, the phone should be detected as "QUALCOMM PROPRIETARY MODEM" on windows device manager.
Then click OK on NsPro and try to write IMEi again.

smp_comms · 04-25-2009, 12:29

still same problem

Elco · 04-25-2009, 12:37

Quote:

Originally Posted by smp_comms

still same problem

PLZ check on different PC. There might be a problem on that PC...

faisal_sherry · 04-25-2009, 13:04

Quote:

Originally Posted by smp_comms

still same problem

flash the phone with the firmware on support and then try again it should be ok and post result here thanks
br

bigifa · 05-12-2009, 03:42

sorry to jump in but fellt it best to keep it all in one thread i have followed the on screen *# instructions and it says all the correct things on the phone but when i re connect the cable it still comes up as a ZTE USB Modem 6000 COMA 1X in the device manager and i get opperation faild any help would be appreciated

Elco · 05-12-2009, 07:03

Quote:

Originally Posted by bigifa

sorry to jump in but fellt it best to keep it all in one thread i have followed the on screen *# instructions and it says all the correct things on the phone but when i re connect the cable it still comes up as a ZTE USB Modem 6000 COMA 1X in the device manager and i get opperation faild any help would be appreciated

Right click on that device and chose "Update Driver.
Then select the driver manualy.
You can find QUalcomm drivers on NsPro\NsPro Driver folder on your PC.

bigifa · 05-12-2009, 12:45

Quote:

Originally Posted by Elco

Right click on that device and chose "Update Driver.
Then select the driver manualy.
You can find QUalcomm drivers on NsPro\NsPro Driver folder on your PC.

did that but still get checking serial comunications..... Opperation daild!

any sugestions

Elco · 05-12-2009, 14:16

Quote:

Originally Posted by bigifa

did that but still get checking serial comunications..... Opperation daild!

any sugestions

Change the com port number of Qualcomm diagnostic Interface then try again.

bigifa · 05-12-2009, 17:12

the diagnostic and NMEA com port where on the ZTE so i changed the drivers manualy to qualcomm and reasingd all my com ports to below 7 but still get the scanning then failed any suggestions

Elco · 05-12-2009, 18:09

I just tested on latest nspro version and here is the result:

So there is something wrong on that PC.
PLZ try on different PC if possible.

bigifa · 05-12-2009, 18:40

i will try it on another l8r on thanks for your help

bigifa · 05-13-2009, 19:38

ok tryed on other pc with fresh xp install but still the same i may have to guive it up as a bad job lol

04-24-2009, 11:21	#1 (permalink)
smp_comms Insane Poster Join Date: Nov 2002 Age: 42 Posts: 83 Member: 17415 Status: Offline Thanks Meter: 12	S8300 Imei Repair Hi am unable to repair the imei on the above handset. I am able to read codes and unlock after I flashed files from support but am unable to repair imei, keep getting operation failed! Any solution to this problem? cheers stuart

04-25-2009, 11:55	#3 (permalink)
smp_comms Insane Poster Join Date: Nov 2002 Age: 42 Posts: 83 Member: 17415 Status: Offline Thanks Meter: 12	Checking serial communication... Operation failed! Then when I retry operation get Operation failed! immediately Last edited by smp_comms; 04-25-2009 at 12:01.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
S8300 imei	Rhyks	Z3X-Team Products	3	02-02-2011 16:02
S8300 imei ????????????	BY_GSMMAN	Z3X-Team Products	2	02-24-2010 12:23
how to change s8300 imei	philzfog16	NSPRO	2	01-04-2010 15:27
804ss/z540 The IMEI repair.Bluetooth repair	liufeifei	QUALCOMM Models (3G)	1	05-17-2006 16:10
P2K Ultimate Box, Unlocking, IMEI Repair, Chinese flash repair and more!	VictorGSM	Main Sales Section	0	07-31-2002 04:36

04-24-2009, 14:04	#2 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	Where exactly you get operation failed ? PLZ post here the EXACT MESSAGES from nspro log window.

04-25-2009, 12:29	#5 (permalink)
smp_comms Insane Poster Join Date: Nov 2002 Age: 42 Posts: 83 Member: 17415 Status: Offline Thanks Meter: 12	still same problem

05-12-2009, 03:42	#8 (permalink)
bigifa Insane Poster Join Date: Aug 2006 Posts: 68 Member: 337286 Status: Offline Thanks Meter: 2	sorry to jump in but fellt it best to keep it all in one thread i have followed the on screen *# instructions and it says all the correct things on the phone but when i re connect the cable it still comes up as a ZTE USB Modem 6000 COMA 1X in the device manager and i get opperation faild any help would be appreciated

05-12-2009, 17:12	#12 (permalink)
bigifa Insane Poster Join Date: Aug 2006 Posts: 68 Member: 337286 Status: Offline Thanks Meter: 2	the diagnostic and NMEA com port where on the ZTE so i changed the drivers manualy to qualcomm and reasingd all my com ports to below 7 but still get the scanning then failed any suggestions

05-12-2009, 18:09	#13 (permalink)
Elco No Life Poster Join Date: Dec 2002 Location: Romania Posts: 10,018 Member: 19254 Status: Offline Sonork: 100.72990 Thanks Meter: 25,395	I just tested on latest nspro version and here is the result: So there is something wrong on that PC. PLZ try on different PC if possible.

05-12-2009, 18:40	#14 (permalink)
bigifa Insane Poster Join Date: Aug 2006 Posts: 68 Member: 337286 Status: Offline Thanks Meter: 2	i will try it on another l8r on thanks for your help

05-13-2009, 19:38	#15 (permalink)
bigifa Insane Poster Join Date: Aug 2006 Posts: 68 Member: 337286 Status: Offline Thanks Meter: 2	ok tryed on other pc with fresh xp install but still the same i may have to guive it up as a bad job lol