SGH-i527m Soft brick ater flashing wrong rooted firmware, Important!!

[allumts]

For all with SGH-I527M from CANADA (ceck carefully)

Try to Flash this ROM tested by me:

ROOT_JDQ39.I527MVLUBNA3.tar.md5

Remove .md5 from the end of the file otherwise it won't work.

It contains the following components from build NA3:
-Prerooted system.img (SuperSu)
-Kernel
-Modem
-TZ

Steps if coming from another ROM:
-Wipe /data and /cache from recovery
-Pull battery, boot into download mode
-Flash with Odin, (not tested if CONVERT in .OCT format and flash with OCTOPUS)
-Wait AT LEAST 3min, first boot will take a while
-Done!

It does not contain the Knox bootloader, so for other people it should be safe to flash from stock MH1 instead of applying the OTA

Since it is prerooted, flashing this on a device with a Knox-enabled bootloader will set Knox Warranty Void to 0x1. You will see the message "Set warranty bit: system". This should not occur if you do not have a Knox bootloader, though it might increase the flash counter or whatever there is on the old bootloader instead of Knox.....

ONLY IF YOU KNOW WHAT ARE DOING:

Also, the CSC (Consumer Software Customizations) will be set to BWA/Sasktel when you flash this ROM.
This can easily be changed by typing *#272*your_imei# (e.g. *#272*123456789012345#) into the dialer.
(Do this if you want to change the preinstalled system apps like My Account carrier apps, APNs, or other settings.)
You will then be able to choose from the following carriers to convert your ROM to:

BMC - Bell
BWA - Sasktel
FMC - Fido
KDO - Koodo
MTA - MTS
RWC - Rogers
SPC - Samsung/Special/Unbranded?
TLS - Telus
VMC - Virgin
CHR - Chatr?

I want hope that this can be useful to many others with the same model from Canada I527M

Br
allumts