z130 and z500 same cable for nsbox ? - GSM-Forum

TRABEL · 01-22-2006, 18:13

hi
im about to make a cable for unibox for z130.
when i check pinouts on support i see for z130 and for z500 different pinouts
but in nsdongle soft it same use z500 cable ...
what to use ??

also , is e810 connector same as z500 ?
thx

PremierGSM · 01-22-2006, 18:16

Hi the Z130 and Z500 are the same cable

TRABEL · 01-22-2006, 18:44

Quote:

Originally Posted by PremierGSM

Hi the Z130 and Z500 are the same cable

thx for the answer
i cant seem to run the z130.exe pinout ,and z500 pinout is for usb cable.
can you please attached a working pinouts for this model for nsbox ?
thx in advance

TRABEL · 01-22-2006, 22:17

hi
please confirm this is the correct pinout for z500 cable for nsbox
thx

TRABEL · 01-23-2006, 10:48

as soon as i insert the cable phone turned on
without battery unlock fails
with battery unlock fails
when im turning phone off , while its shuting down it starts unlocking but fails
any help ?

Checking serial communication...
Unlocking phone...
Phone power reset...
Operation successfully completed

PHONE STILL LOCK!!
after i tried sh.itload of time turning on and off
wtf is going on
some support plz

Elco · 01-23-2006, 12:21

1. Connect powered off phone without battery to cable(Z500 cable Nsbox). Phone will power on.
2. Select correct model and install the drivers when asked.
3. Use UNLOCK function to unlock the phone.

TRABEL · 01-23-2006, 12:59

Quote:

Originally Posted by Elco

1. Connect powered off phone without battery to cable(Z500 cable Nsbox). Phone will power on.
2. Select correct model and install the drivers when asked.
3. Use UNLOCK function to unlock the phone.

hi
i did manage to unlock both phones eventually....

i did had many problems and it took me about an hour to unlock seconed phone.
first phone i pluged the cable and pressed unlock , all was o.k.
seconed phone did many problems as abouve.
even after it said unlocked phone was still locked , after i entered master code with sim in phone was unlocked. but after turned off and on again phone was lock again ....

i then try to relock it , it failed. and it still asked for password.
i enter master pass , and after phone was unlocked i mad full fecotry reset from phone menu. only then it was fully unlocked.
also , without bettery phone didnt powered on.
and with bettery phone was turned on auto as soon as i put cable in.
anyway i did found out that with phone powered on it was doing all fine for some weird reason....
maybe you can add in soft near PHONE:OFF if to use with battery in or without ? and maybe to add tip's to soft for ways to unlock instad of posting in forum ... will be much easyer then wait for answer.
thx

BTW

Quote:

Originally Posted by Elco

2. Select correct model and install the drivers when asked.

didnt asked to install any driver ??

01-22-2006, 18:13	#1 (permalink)
TRABEL No Life Poster Join Date: Feb 2003 Location: on the Moon ;) Age: 36 Posts: 2,642 Member: 21937 Status: Offline Thanks: 144 Thanked 268 Times in 169 Posts	z130 and z500 same cable for nsbox ? hi im about to make a cable for unibox for z130. when i check pinouts on support i see for z130 and for z500 different pinouts but in nsdongle soft it same use z500 cable ... what to use ?? also , is e810 connector same as z500 ? thx

01-23-2006, 10:48	#5 (permalink)
TRABEL No Life Poster Join Date: Feb 2003 Location: on the Moon ;) Age: 36 Posts: 2,642 Member: 21937 Status: Offline Thanks: 144 Thanked 268 Times in 169 Posts	as soon as i insert the cable phone turned on without battery unlock fails with battery unlock fails when im turning phone off , while its shuting down it starts unlocking but fails any help ? Checking serial communication... Unlocking phone... Phone power reset... Operation successfully completed PHONE STILL LOCK!! after i tried sh.itload of time turning on and off wtf is going on some support plz Last edited by TRABEL; 01-23-2006 at 11:14.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
usb cable for z130 and z500	tobi2	TST Dongle	5	01-06-2006 12:26
for unlock z130 and z500	tobi2	TST Dongle	2	12-13-2005 06:11
Z105, Z130 and Z500 Cables	tical	NSPRO	22	11-26-2005 22:23
Same cable for 8850/8890 as for 8210?	laxxe	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	3	10-17-2001 01:41
Same cable for 8850 as for 8210?	laxxe	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	8	09-23-2001 21:15

01-22-2006, 18:16	#2 (permalink)
PremierGSM No Life Poster Join Date: Jun 2002 Location: England Posts: 889 Member: 13335 Status: Offline Thanks: 0 Thanked 2 Times in 1 Post	Hi the Z130 and Z500 are the same cable

01-23-2006, 12:21	#6 (permalink)
Elco Product Supporter Join Date: Dec 2002 Location: Romania Posts: 9,694 Member: 19254 Status: Offline Sonork: 100.72990 Thanks: 1 Thanked 23,728 Times in 1,345 Posts	1. Connect powered off phone without battery to cable(Z500 cable Nsbox). Phone will power on. 2. Select correct model and install the drivers when asked. 3. Use UNLOCK function to unlock the phone.