Server down??? - GSM-Forum

vule · 03-01-2005, 15:44

Can't flash / unlock from saturday...

Error: 0x00016040
Error: 0x00016018

BR

Vule

**universalbox** · 05-12-2005, 22:50

If you can read info from the server, then its not down.
What is the action you preformed? Siemens code calculation?
If yes, your phone model is not supported. Its not a server related error.

vule · 05-13-2005, 08:18

LOLOLOLOL You have been in stasis??? Look at the date of my post....

Anyway, thanks for answer, it was not siemens, it was K500i and i still can unlock but can't flash phones...

Best regards

Vule

Thira · 05-23-2005, 20:24

with siemens have two/three error code
0x01000010
0x01001030

what is the problem?

**universalbox** · 05-24-2005, 11:54

If you have error with Siemens that means you can't calculate code for that model because not possible to read the flash id. It is factory protected. You should find a testpoint solution...

Thira · 05-24-2005, 12:00

but when don't connect phone to cable, the error code is similar.
my cable used with other software, no problem.

**universalbox** · 05-24-2005, 12:17

did you use that cable with our software with success?

Thira · 05-24-2005, 12:23

my siemens cable is working with sst soft, or eepromtool, but the universal prog not work for me with siemens. With SonyEriccson, the prog is working for me with T28 service cable.

japunlock · 06-21-2005, 15:45

i get error 0x000180F4 and cannot unlock flash or anything plz help and cannot open the server page

03-01-2005, 15:44	#1 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 40 Posts: 722 Member: 10854 Status: Offline Sonork: 1578988 Thanks: 0 Thanked 3 Times in 3 Posts	Server down??? Can't flash / unlock from saturday... Error: 0x00016040 Error: 0x00016018 BR Vule

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
cannot connect to server - is server down?	hridaya	Cruiser Suite	6	08-03-2007 20:01
Error on server side?? Server Down?? 14/June/2007 00:30 HS GMT	DJiCE	Universalbox	2	06-15-2007 11:21

05-12-2005, 22:50	#2 (permalink)
universalbox Product Manager Join Date: Jun 2004 Age: 37 Posts: 5,893 Member: 68982 Status: Offline Thanks: 747 Thanked 18,006 Times in 1,741 Posts	If you can read info from the server, then its not down. What is the action you preformed? Siemens code calculation? If yes, your phone model is not supported. Its not a server related error.

05-13-2005, 08:18	#3 (permalink)
vule No Life Poster Join Date: Apr 2002 Location: Radiometer Medical ApSBrønshøj Age: 40 Posts: 722 Member: 10854 Status: Offline Sonork: 1578988 Thanks: 0 Thanked 3 Times in 3 Posts	LOLOLOLOL You have been in stasis??? Look at the date of my post.... Anyway, thanks for answer, it was not siemens, it was K500i and i still can unlock but can't flash phones... Best regards Vule

05-23-2005, 20:24	#4 (permalink)
Thira Junior Member Join Date: Aug 2000 Age: 40 Posts: 13 Member: 1962 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	with siemens have two/three error code 0x01000010 0x01001030 what is the problem?

05-24-2005, 11:54	#5 (permalink)
universalbox Product Manager Join Date: Jun 2004 Age: 37 Posts: 5,893 Member: 68982 Status: Offline Thanks: 747 Thanked 18,006 Times in 1,741 Posts	If you have error with Siemens that means you can't calculate code for that model because not possible to read the flash id. It is factory protected. You should find a testpoint solution...

05-24-2005, 12:00	#6 (permalink)
Thira Junior Member Join Date: Aug 2000 Age: 40 Posts: 13 Member: 1962 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	but when don't connect phone to cable, the error code is similar. my cable used with other software, no problem.

05-24-2005, 12:17	#7 (permalink)
universalbox Product Manager Join Date: Jun 2004 Age: 37 Posts: 5,893 Member: 68982 Status: Offline Thanks: 747 Thanked 18,006 Times in 1,741 Posts	did you use that cable with our software with success?

05-24-2005, 12:23	#8 (permalink)
Thira Junior Member Join Date: Aug 2000 Age: 40 Posts: 13 Member: 1962 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	my siemens cable is working with sst soft, or eepromtool, but the universal prog not work for me with siemens. With SonyEriccson, the prog is working for me with T28 service cable.

06-21-2005, 15:45	#9 (permalink)
japunlock No Life Poster Join Date: Oct 2004 Location: Bolivia Age: 27 Posts: 1,157 Member: 87396 Status: Offline Thanks: 38 Thanked 21 Times in 18 Posts	i get error 0x000180F4 and cannot unlock flash or anything plz help and cannot open the server page