PBB2 and RM-78 (6280) flash problem - GSM-Forum

alex_time · 06-14-2006, 08:36

I have tried to flash my 6280 using Phoenix but I got the error dislpayed on the attached picture. Could someone tell me the right way to restore my phone? I was looking for some how to but I did not find anything, maybe because I am new about flashing phone

.

Thanks in advance

alex_time · 06-14-2006, 08:49

I have followed all the instructions published in "PBB2 Installation Notes" I am using a DKU-2 USB cable. §I have created two connection in phoneix, the first is Fbus whit the port number diplayed in the control panel under "FLS Virtual Port" and the second port was USB. After that I have opened product (File Menu), clicked on normal mode, and gone to Flashin->Firmware Update, after I was sure the product code was right I clicked on Start, the process worked well for a couple of minutes and after that I got the error displayed on the picture attached. That's all I have done.

Royslade · 06-14-2006, 09:16

Dear Friend!
Why you used an old firware for flashing? The latest firware for Nokia 6280 is 3.70 and you've tried 3.40. WHY??????

BR Roy

alex_time · 06-14-2006, 09:51

Quote:

Originally Posted by Royslade

Dear Friend!
Why you used an old firware for flashing? The latest firware for Nokia 6280 is 3.70 and you've tried 3.40. WHY??????

BR Roy

When I use "Phone Information" function it said that the current version was 3.40 and I used the same ver. Was it wrong? It was not a downgrade, isn't it?

Royslade · 06-14-2006, 09:58

As I read there are many problems with the old versions but the 3.70 can flash with the latest Phoenix without any problem, if the phone is alive of course. Dead USB flashing is not implemented yet in 3.70...

BR Roy

dennt · 06-14-2006, 10:06

What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.

Royslade · 06-14-2006, 10:14

Quote:

Originally Posted by dennt

What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.

Dead phone USB flashing is not working with 6280 yet.

BR Roy

alex_time · 06-14-2006, 11:13

Quote:

Originally Posted by Royslade

As I read there are many problems with the old versions but the 3.70 can flash with the latest Phoenix without any problem, if the phone is alive of course. Dead USB flashing is not implemented yet in 3.70...

BR Roy

Phone is dead, do you know if in the future dead usb flashing will be implemented?

alex_time · 06-14-2006, 11:18

Quote:

Originally Posted by dennt

What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.

I am using Phoenix 2006.12.7.138.

I have tried the Dead phone flashing but it does not work, when I press the power on button I get this message
"Flash failed. Flash: Tried to load empty data to phone. Check that flash images contain correct data. If you tried dead phone flashing this means that flash image does not support that."

If I retry I get the same message. I haven't used rare Phoenix

alex_time · 06-14-2006, 11:20

Quote:

Originally Posted by Royslade

Dead phone USB flashing is not working with 6280 yet.

BR Roy

Is it because nokia does not release new firmware or because phoenix cannot flash dead phone? what's the problem with flashig dead 6280? What I have to wait for?
Someone say that Jaf and Fbus can flash it, is this voice real?

Thanks

Royslade · 06-14-2006, 11:38

The problem is in the MCU file. This isn't contains the data for it. We are waiting for the next release, maybe it will. JAF with P-key can repair 6280 via FBUS.

BR Roy

saiwaifeixue · 06-19-2006, 15:16

What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.

aslan172 · 06-19-2006, 15:36

hello your 6280 phone dont have the adl file

06-19-2006, 15:36	#13 (permalink)
aslan172 Freak Poster Join Date: Jun 2005 Age: 55 Posts: 217 Member: 156953 Status: Offline Thanks: 5 Thanked 9 Times in 7 Posts	PBB2 and RM-78 (6280) flash problem hello your 6280 phone dont have the adl file

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
RM-78 6280 Flashing Problem help me	polymar01	HWK	0	06-06-2009 11:55
Rm-78 6280 Unlock Sucessful With Jaf	div_raj	J.A.F. V-SPEC	2	03-20-2008 08:21
Rm-78 6280 Unlock Sucessful With BB5 BOX	vinay_sharma	BB5BOX	3	03-18-2008 11:19
RM-78 6280/6288 tp damaged now ok	youssef70	J.A.F. V-SPEC	2	02-14-2008 16:37
Model=6280 Rm-78 New Flash Chip-ns256nopbjwoo [spanison]	chiragp	AdvanceUFS	0	01-30-2008 09:56

06-14-2006, 08:49	#2 (permalink)
alex_time Junior Member Join Date: Jun 2006 Posts: 17 Member: 293343 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I have followed all the instructions published in "PBB2 Installation Notes" I am using a DKU-2 USB cable. §I have created two connection in phoneix, the first is Fbus whit the port number diplayed in the control panel under "FLS Virtual Port" and the second port was USB. After that I have opened product (File Menu), clicked on normal mode, and gone to Flashin->Firmware Update, after I was sure the product code was right I clicked on Start, the process worked well for a couple of minutes and after that I got the error displayed on the picture attached. That's all I have done.

06-14-2006, 09:16	#3 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 46 Posts: 768 Member: 14515 Status: Online Sonork: 100.77248 Thanks: 44 Thanked 15 Times in 11 Posts	Dear Friend! Why you used an old firware for flashing? The latest firware for Nokia 6280 is 3.70 and you've tried 3.40. WHY?????? BR Roy

06-14-2006, 09:58	#5 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 46 Posts: 768 Member: 14515 Status: Online Sonork: 100.77248 Thanks: 44 Thanked 15 Times in 11 Posts	As I read there are many problems with the old versions but the 3.70 can flash with the latest Phoenix without any problem, if the phone is alive of course. Dead USB flashing is not implemented yet in 3.70... BR Roy

06-14-2006, 10:06	#6 (permalink)
dennt Freak Poster Join Date: Feb 2002 Location: Russia Posts: 476 Member: 9418 Status: Offline Thanks: 5 Thanked 15 Times in 3 Posts	What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.

06-14-2006, 11:38	#11 (permalink)
Royslade No Life Poster Join Date: Aug 2002 Age: 46 Posts: 768 Member: 14515 Status: Online Sonork: 100.77248 Thanks: 44 Thanked 15 Times in 11 Posts	The problem is in the MCU file. This isn't contains the data for it. We are waiting for the next release, maybe it will. JAF with P-key can repair 6280 via FBUS. BR Roy

06-19-2006, 15:16	#12 (permalink)
saiwaifeixue Insane Poster Join Date: Jul 2005 Age: 37 Posts: 74 Member: 158434 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	What version of Phoenix do you use? Try to make "Dead phone flashing", but I guess you try to use rare Phoenix.