V3 RAZR boot 8.26 for mototools user unlock solutions - GSM-Forum

shura · 10-13-2005, 16:37

Short to GND, Connect to PC, disconnect GND, replace BOOT 7E0 using MotoTools

Russian manual
http://www.gsmtricks.com.ua/forum/viewtopic.php?t=22846

sorinm · 10-13-2005, 22:28

first picture seems OK but on the second one something is terrible wrong

sam unlocker · 10-13-2005, 22:44

yes you are true SORINM it's bad for phone can be dead if you take another direction

mrfixit · 10-14-2005, 01:15

better use chessel and hammer to remove shielding

intrepidusa · 10-22-2005, 15:53

Does not work! Tried it and once you short the point to ground you lose any and all access to flash no matter what app you use. Got it to recognize one time and still same issue with RDL SIG ERROR. Keep trying...

mrfixit · 10-22-2005, 18:23

killed mine (v3 8.26) with that solution

unlocker2000 · 10-22-2005, 22:07

Works 100 % ok , tested on 5 Units without problems.

tonyjox26 · 01-19-2006, 16:43

Unlocker2000: Could you tell us step by step what you did, please ?

ssa · 01-28-2006, 13:46

no need for testpoint anymore on 8.26 just downgrade your boot to a lower version and unlock it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3 boot 8.26.keypad not working..after unlock	ky_bAttaUsAi	Motorola P2k	3	08-29-2009 23:33
V3 boot 8.26.keys not working..after unlock	udai	Smart-Clip	7	05-18-2006 05:08
Unlock V3 Boot 8.26 with one smart-unlocker	motursa	Motorola P2k	9	01-21-2006 17:39
I need V3 Boot 8.26 file for boot upgrade.	blaiseid	Smart-Clip	5	01-21-2006 09:32
cannot unlock v3 boot 8.26 with test point	codec_romania	Smart-Clip	4	10-24-2005 09:22

10-13-2005, 22:28	#2 (permalink)
sorinm No Life Poster Join Date: Apr 2002 Posts: 1,430 Member: 10964 Status: Offline Thanks Meter: 285	first picture seems OK but on the second one something is terrible wrong

10-13-2005, 22:44	#3 (permalink)
sam unlocker No Life Poster Join Date: Aug 2002 Location: N400 Age: 54 Posts: 549 Member: 14632 Status: Offline Thanks Meter: 32	yes you are true SORINM it's bad for phone can be dead if you take another direction

10-14-2005, 01:15	#4 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	better use chessel and hammer to remove shielding

10-22-2005, 15:53	#5 (permalink)
intrepidusa Junior Member Join Date: Oct 2005 Posts: 1 Member: 192577 Status: Offline Thanks Meter: 0	Does not work! Tried it and once you short the point to ground you lose any and all access to flash no matter what app you use. Got it to recognize one time and still same issue with RDL SIG ERROR. Keep trying...

10-22-2005, 18:23	#6 (permalink)
mrfixit No Life Poster Join Date: Apr 2004 Location: MOON Posts: 5,858 Member: 60899 Status: Offline Thanks Meter: 792	killed mine (v3 8.26) with that solution

10-22-2005, 22:07	#7 (permalink)
unlocker2000 No Life Poster Join Date: Mar 2004 Posts: 636 Member: 56387 Status: Offline Thanks Meter: 10	Works 100 % ok , tested on 5 Units without problems.

01-19-2006, 16:43	#8 (permalink)
tonyjox26 Junior Member Join Date: Jan 2006 Posts: 1 Member: 222881 Status: Offline Thanks Meter: 0	Unlocker2000: Could you tell us step by step what you did, please ?

01-28-2006, 13:46	#9 (permalink)
ssa No Life Poster Join Date: Feb 2003 Location: Inside CPU Age: 43 Posts: 1,861 Member: 23420 Status: Offline Thanks Meter: 3,080	no need for testpoint anymore on 8.26 just downgrade your boot to a lower version and unlock it