What Happend With X300? - GSM-Forum

COMMANDCOM · 01-04-2005, 22:23

Hi,

with flash tools 5.6 flash main and spanish language but the result = unlocked but no network, impossible change band on the menu.

Flash main in second time and the process abort (load boot but after no response, no flash). Cable with autopower, battery out, plug cable, push main button, insert battery and power on phone.

The phone power on normally without sim but with sim hang in panasonic logo.
With x-series flasher and flash of support site same result.

Please Pana-Extreme Team, solution for this.

B.R.

mohammadmouazen · 01-04-2005, 22:29

hi

flash with main flash its work
tested many phones x300

br

COMMANDCOM · 01-04-2005, 22:33

The problem is that is impossible turn to flash again. After the boot is loaded the process stop.

Another solution?

Thanks.

^FiStrO^ · 01-05-2005, 10:37

Hello

I have Same problem

1- Flash Main Soft. Ok
2- Flash Language , Ok

Power on phone and not network
Enter in Menu.Select 900-1800 and phone respond "Not make"

3- Flash phone and soft "Sending Bootloader to Phone".ProgressBar 100% and wait and wait and wait .........xxxxx

In this moment phone put in display "Panasonic" 3 or 4 seconds and power off

I think is new chip Flash Toshiba type.

Exist Solution for this problem ?

Please Help Milikito or Team Panaextream

B. Regards

01-04-2005, 22:23	#1 (permalink)
COMMANDCOM Freak Poster Join Date: Jul 2003 Posts: 356 Member: 36018 Status: Offline Thanks Meter: 8	What Happend With X300? Hi, with flash tools 5.6 flash main and spanish language but the result = unlocked but no network, impossible change band on the menu. Flash main in second time and the process abort (load boot but after no response, no flash). Cable with autopower, battery out, plug cable, push main button, insert battery and power on phone. The phone power on normally without sim but with sim hang in panasonic logo. With x-series flasher and flash of support site same result. Please Pana-Extreme Team, solution for this. B.R.

01-04-2005, 22:33	#3 (permalink)
COMMANDCOM Freak Poster Join Date: Jul 2003 Posts: 356 Member: 36018 Status: Offline Thanks Meter: 8	Yes, But... The problem is that is impossible turn to flash again. After the boot is loaded the process stop. Another solution? Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What happend with support? @Raskal HELP	fingusio	Twisterflasher	0	10-31-2005 11:30
What happend with forum, where section for HWK,Twister,etc.?	fingusio	Board, Server and Login Problems/Support	3	08-28-2005 19:36
@admins or mods. What happend with Crew?	Trier	Off Topic Zone	1	01-28-2003 15:57
What happend with the user name	G$M solution	Off Topic Zone	1	02-28-2002 17:25
Whats happend with this FORUM	Zahooo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	17	12-07-1999 12:04

01-04-2005, 22:29	#2 (permalink)
mohammadmouazen No Life Poster Join Date: Dec 2003 Location: Jordan Posts: 790 Member: 45682 Status: Offline Thanks Meter: 54	hi flash with main flash its work tested many phones x300 br

01-05-2005, 10:37	#4 (permalink)
^FiStrO^ No Life Poster Join Date: Jul 2004 Location: Inside Polar Box Posts: 723 Member: 71492 Status: Offline Thanks Meter: 119	Hello I have Same problem 1- Flash Main Soft. Ok 2- Flash Language , Ok Power on phone and not network Enter in Menu.Select 900-1800 and phone respond "Not make" 3- Flash phone and soft "Sending Bootloader to Phone".ProgressBar 100% and wait and wait and wait .........xxxxx In this moment phone put in display "Panasonic" 3 or 4 seconds and power off I think is new chip Flash Toshiba type. Exist Solution for this problem ? Please Help Milikito or Team Panaextream B. Regards