LG8120 Hang after unlock - GSM-Forum

Hanukkah · 02-01-2005, 03:10

I have here LG8120 v102. It was unlocked. After 1 day customer came back as it hanged in the boot screen.

What can be done to fix this?

PINKY_CHINA · 02-01-2005, 07:16

try to reset the phone to factory setting

Hanukkah · 02-01-2005, 08:32

Quote:

Originally Posted by PINKY_CHINA

try to reset the phone to factory setting

How do you advise to do that? No keypress possible after startup screen.

saejor · 02-01-2005, 09:48

This sounds like a version error.

The clip only supports versions 1.01 - 1.04 at the moment.

Sounds like your phone may be a 1.05 or 1.06?

Did you follow the instructions in the instruction manual to check the version prior to unlocking? If the phone is now hanging it will need downgrading to 1.04 or below.

If you need a flashing cable to downgrade contact us:

+44 7950 599 555 - PAUL
+44 7979 888 282 - PHILIP

Saejor
Data1Clip Team!

Hanukkah · 02-01-2005, 15:25

Quote:

Originally Posted by saejor

This sounds like a version error.

The clip only supports versions 1.01 - 1.04 at the moment.

Sounds like your phone may be a 1.05 or 1.06?

Did you follow the instructions in the instruction manual to check the version prior to unlocking? If the phone is now hanging it will need downgrading to 1.04 or below.

If you need a flashing cable to downgrade contact us:

+44 7950 599 555 - PAUL
+44 7979 888 282 - PHILIP

Saejor
Data1Clip Team!

I checked the version before unlocking. It was a ver 1.02 and it was unlocked via the procedure written on the manual.

It was used for 1 day and the customer came back, after it just would not boot. Stuck on the startup screen. -- > Are there any codes that can be pressed to force reset the phone?

neb · 02-02-2005, 02:12

Got similar problem with U8120 v1.01 after successful unlocking, customer goes back to us several hours later with the unit having menu problem.

Ven0m · 02-03-2005, 02:17

Quote:

Originally Posted by neb

Got similar problem with U8120 v1.01 after successful unlocking, customer goes back to us several hours later with the unit having menu problem.

is there a another way to correct this other than flashing? coz if there aren't any, we must be cautious when unlocking LG's. customers will complain.

saejor · 02-03-2005, 10:54

This is totally unrelated to the unlocking with the clip we can assure you that, I have personally used 5 clips to unlock over 500 LG 8120 handsets, a mixture of 101, 102, 103 & a few 104 versions, and not a single handset from my customer was returned, that was just over 1 month ago.

These errors you are reffering to are inherent to the actual handsets and occur from customer use rather than unlocking.

Saejor.
Data1Clip Team

Ven0m · 02-06-2005, 03:17

Quote:

Originally Posted by saejor

This is totally unrelated to the unlocking with the clip we can assure you that, I have personally used 5 clips to unlock over 500 LG 8120 handsets, a mixture of 101, 102, 103 & a few 104 versions, and not a single handset from my customer was returned, that was just over 1 month ago.

These errors you are reffering to are inherent to the actual handsets and occur from customer use rather than unlocking.

Saejor.
Data1Clip Team

@saejor
it's assuring to hear that these problems are not really related to unlocking using the clip. thanks. =)

regards,
Ven0m

02-01-2005, 03:10	#1 (permalink)
Hanukkah No Life Poster Join Date: Jul 2001 Location: RP Age: 48 Posts: 890 Member: 5246 Status: Offline Thanks Meter: 9	LG8120 Hang after unlock I have here LG8120 v102. It was unlocked. After 1 day customer came back as it hanged in the boot screen. What can be done to fix this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cf110 hang after unlock with sie ver 1.23!	minhtrimobile	Martech CLIP / Box / Key	3	10-29-2006 11:37
Nec e616 hanging after unlocking by PBB	lexwon	Phoenix Black Box	1	07-17-2006 05:56
Z520i Hanging after unlocking. Solutions??	Black_Daimond	Sony Ericsson	2	11-14-2005 17:16
P910i hang after unlock by UFS3	jan0	Sony Ericsson	4	09-11-2005 04:58
nec 338 hang after unlock with crassy 5.0	fancyvpp	NEC	5	05-25-2005 00:45

02-01-2005, 07:16	#2 (permalink)
PINKY_CHINA Product Supporter Join Date: Jan 2004 Location: Shenzhen, P. R. China Posts: 317 Member: 107120 Status: Offline Thanks Meter: 14	try to reset the phone to factory setting

02-01-2005, 09:48	#4 (permalink)
saejor Freak Poster Join Date: Mar 2001 Posts: 153 Member: 3526 Status: Offline Thanks Meter: 2	This sounds like a version error. The clip only supports versions 1.01 - 1.04 at the moment. Sounds like your phone may be a 1.05 or 1.06? Did you follow the instructions in the instruction manual to check the version prior to unlocking? If the phone is now hanging it will need downgrading to 1.04 or below. If you need a flashing cable to downgrade contact us: +44 7950 599 555 - PAUL +44 7979 888 282 - PHILIP Saejor Data1Clip Team!

02-02-2005, 02:12	#6 (permalink)
neb Freak Poster Join Date: Dec 1999 Location: Earth Posts: 461 Member: 751 Status: Offline Thanks Meter: 19	Got similar problem with U8120 v1.01 after successful unlocking, customer goes back to us several hours later with the unit having menu problem.

02-03-2005, 10:54	#8 (permalink)
saejor Freak Poster Join Date: Mar 2001 Posts: 153 Member: 3526 Status: Offline Thanks Meter: 2	This is totally unrelated to the unlocking with the clip we can assure you that, I have personally used 5 clips to unlock over 500 LG 8120 handsets, a mixture of 101, 102, 103 & a few 104 versions, and not a single handset from my customer was returned, that was just over 1 month ago. These errors you are reffering to are inherent to the actual handsets and occur from customer use rather than unlocking. Saejor. Data1Clip Team