K300i - GSM-Forum

Hazard · 11-07-2005, 13:41

I have a k300i that doesnt want Unlock or Flash. It just says powering Fone and then Says cannot detect fone model and that CID detected an error. Ive tried to Recover Fone and that works but as soon as i click Flash afterwards or unlock, it just gives me that error... any ideas?

Hazard · 11-07-2005, 17:25

Actually, i got it working now, it flashes the Main but gives an error at the Files system so now the fone doesnt wana go on. ive tried everything, even different image files...

TRY TO RECOVER PHONE NOW...
Powering phone...
Speed: 921600 bps
Header acknowledged.
Prologue acknowledged.
Payload acknowledged.
SSW uses dynamic hash, dynamic hash len is: 1
Going to flash 1 blocks ...
current recovery file cid: 36
phone recovery done, can reflash now.
Time elapsed: 6 secs
Powering phone...
Chip Id: 0x8000
CID detected: 36
Phone color: RED.
Speed: 921600 bps
Header acknowledged.
Prologue acknowledged.
Payload acknowledged.
OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 355***********
Powering phone...
Chip Id: 0x8000
CID detected: 36
Phone color: BROWN.
Speed: 921600 bps
Header acknowledged.
Prologue acknowledged.
Payload acknowledged.
OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 355***********
Flashing main fw: C:\K300i\k300i_r2at003_emea_main.bin.snx
FILE CID: 57086
SSW uses dynamic hash, dynamic hash len is: 206
Going to flash 206 blocks ...
loader finished with errcode: 0
SSW uploading finished.
Flashing fs image: C:\K300i\K300i_Red36_R2AT003_EU_EMEA7_Fs.bin.snx
FILE CID: 36
SSW uses dynamic hash, dynamic hash len is: 73
Going to flash 73 blocks ...
Err when get answer: worthless answer, expect 0x89.
superblock not accepted.
Time elapsed: 231 secs

plz help

asem · 11-07-2005, 22:19

Hi
try recovery the phone, cid_red_36 and write gdfs&flash.
B.Regardes

Hazard · 11-08-2005, 08:19

tried all that, it writes gdf, it even repairs the fone and flashes main file but just when i wana flash FS Image then it says superblock not accepted, it first goes to 2% then it gives that error

FullFLASHgSMPH · 11-09-2005, 01:20

hi how to flash cid 36 where is k300 gdfs:Ufs Serial Number is #96375
UFSx ready.
Powering phone...
Chip Id: 0x8000
CID detected: 36
Phone color: BROWN.
Speed: 115200 bps
Header acknowledged.
Prologue acknowledged.
Payload acknowledged.
OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 35579700498263
Flashing main fw: C:\Program Files\Sonics\K300i_GENERIC_Taiwan_R2AE033_CID29\K3 00i_GENERIC_SW_TAIWAN_R2AE033_CID29.SW
FILE CID: 29
SSW uses dynamic hash, dynamic hash len is: 220
Going to flash 220 blocks ...
Sending superblock command no ack
Time elapsed: 16 secs

... even i use orig sonics box dsame problem::

Connect device first!
Ufs Serial Number is #7945360
Invalid License String.
Faild to connect to Ufs, please unplug and reconnect it...
Ufs Serial Number is #96375
UFSx ready.
Powering phone...
Chip Id: 0x8000
CID detected: 36
Phone color: BROWN.
Speed: 115200 bps
Header acknowledged.
Prologue acknowledged.
Payload acknowledged.
OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 35579700498263
Flashing main fw: C:\Program Files\Sonics\k300i_Red36_r2at003_china_Main[1].bin\k300i_Red36_r2at003_china_Main.bin.snx
FILE CID: 36
SSW uses dynamic hash, dynamic hash len is: 219
Going to flash 219 blocks ...
Sending superblock command no ack
Time elapsed: 16 secs

Hazard · 11-09-2005, 11:41

use sonics version 1.105, it works on there, for some reson the older versions work better than the newer ones.

11-07-2005, 13:41	#1 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	K300i I have a k300i that doesnt want Unlock or Flash. It just says powering Fone and then Says cannot detect fone model and that CID detected an error. Ive tried to Recover Fone and that works but as soon as i click Flash afterwards or unlock, it just gives me that error... any ideas?

11-09-2005, 01:20	#5 (permalink)
FullFLASHgSMPH Banned Join Date: Jul 2005 Location: Philippines Age: 53 Posts: 4,639 Member: 161739 Status: Offline Sonork: 100.1584054 Thanks Meter: 3,338	flashing problem k300i hi how to flash cid 36 where is k300 gdfs:Ufs Serial Number is #96375 UFSx ready. Powering phone... Chip Id: 0x8000 CID detected: 36 Phone color: BROWN. Speed: 115200 bps Header acknowledged. Prologue acknowledged. Payload acknowledged. OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 35579700498263 Flashing main fw: C:\Program Files\Sonics\K300i_GENERIC_Taiwan_R2AE033_CID29\K3 00i_GENERIC_SW_TAIWAN_R2AE033_CID29.SW FILE CID: 29 SSW uses dynamic hash, dynamic hash len is: 220 Going to flash 220 blocks ... Sending superblock command no ack Time elapsed: 16 secs ... even i use orig sonics box dsame problem:: Connect device first! Ufs Serial Number is #7945360 Invalid License String. Faild to connect to Ufs, please unplug and reconnect it... Ufs Serial Number is #96375 UFSx ready. Powering phone... Chip Id: 0x8000 CID detected: 36 Phone color: BROWN. Speed: 115200 bps Header acknowledged. Prologue acknowledged. Payload acknowledged. OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 35579700498263 Flashing main fw: C:\Program Files\Sonics\k300i_Red36_r2at003_china_Main[1].bin\k300i_Red36_r2at003_china_Main.bin.snx FILE CID: 36 SSW uses dynamic hash, dynamic hash len is: 219 Going to flash 219 blocks ... Sending superblock command no ack Time elapsed: 16 secs

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is k300i supported or not???	ASHIF	Sonics Box	3	07-03-2005 17:44
How to do new K300i ?	gsmnice	Sony Ericsson	9	05-09-2005 00:17
K300i RED CID36?	anduin	Cruiser Suite	18	05-05-2005 14:27
K300i CID36 RED	kpw	Cruiser Suite	23	04-21-2005 06:49
Flashfile K300i	jepor	Cruiser Suite	0	04-14-2005 18:11

11-07-2005, 17:25	#2 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	Actually, i got it working now, it flashes the Main but gives an error at the Files system so now the fone doesnt wana go on. ive tried everything, even different image files... TRY TO RECOVER PHONE NOW... Powering phone... Speed: 921600 bps Header acknowledged. Prologue acknowledged. Payload acknowledged. SSW uses dynamic hash, dynamic hash len is: 1 Going to flash 1 blocks ... current recovery file cid: 36 phone recovery done, can reflash now. Time elapsed: 6 secs Powering phone... Chip Id: 0x8000 CID detected: 36 Phone color: RED. Speed: 921600 bps Header acknowledged. Prologue acknowledged. Payload acknowledged. OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 355********* Powering phone... Chip Id: 0x8000 CID detected: 36 Phone color: BROWN. Speed: 921600 bps Header acknowledged. Prologue acknowledged. Payload acknowledged. OTP status: 0, locked: 1, CID: 36 PAF: 1, IMEI: 355********* Flashing main fw: C:\K300i\k300i_r2at003_emea_main.bin.snx FILE CID: 57086 SSW uses dynamic hash, dynamic hash len is: 206 Going to flash 206 blocks ... loader finished with errcode: 0 SSW uploading finished. Flashing fs image: C:\K300i\K300i_Red36_R2AT003_EU_EMEA7_Fs.bin.snx FILE CID: 36 SSW uses dynamic hash, dynamic hash len is: 73 Going to flash 73 blocks ... Err when get answer: worthless answer, expect 0x89. superblock not accepted. Time elapsed: 231 secs plz help

11-07-2005, 22:19	#3 (permalink)
asem Insane Poster Join Date: Aug 2002 Location: tripoli libya Age: 54 Posts: 75 Member: 14663 Status: Offline Thanks Meter: 6	Hi try recovery the phone, cid_red_36 and write gdfs&flash. B.Regardes

11-08-2005, 08:19	#4 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	tried all that, it writes gdf, it even repairs the fone and flashes main file but just when i wana flash FS Image then it says superblock not accepted, it first goes to 2% then it gives that error

11-09-2005, 11:41	#6 (permalink)
Hazard Freak Poster Join Date: May 2004 Age: 43 Posts: 323 Member: 66334 Status: Offline Thanks Meter: 4	use sonics version 1.105, it works on there, for some reson the older versions work better than the newer ones.