Huawei G6620 new firmware need help to unlock

[scx008]

here is log

-----
COM9 [VCP0] selected
module v3.92
Device: Huawei-G6620
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 0.0/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0000]: 0000:000000000000 [AMD] AM29DL323D
chip size: 0Mb
otp status/size: S_DONE/00000000
NAND flash id[0000]: 0000:000000000000 [SAMSUNG] K9F5608Q0C
chip size: 0Mb
page/spare size: 0000/0000
pages per block: 0000
bits i/o: 00
address cycles: 00
internal RAM size: 00000000
external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000
error: can not boot device: 07D4:S_BROM_DOWNLOAD_DA_FAIL
error: last error: 07D4:S_BROM_DOWNLOAD_DA_FAIL
Disconnect...
done
Finished, time used: 18 sec
Remove/Install battery now !
-----------------
regards
thanks bro

[scx008]

COM9 [VCP0] selected
module v3.92
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6620
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: G6620SS.C200.M40.04.10
Version: CKT53_12832_09B_HW
====================
New firmware found (v.3.92, database date: 29.05.2011):
G6620SS.C200.M40.04.10

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
116 byte(s) read
imei: 35194804601977
connection Ok
217 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
205 byte(s) read
reading data...
220 byte(s) read
lock[1] code: + 43373756
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 31 sec
Remove/Install battery now !

here is right one~~~~~~~

[scx008]

I'm sorry, lock[1] code: + 43373756 is unlock code.