5310 china phone need pin out - GSM-Forum

dinsky2030 · 02-01-2009, 05:37

good day to all please help me where is the rx and tx of this board,all coper point beside the battery terminal is ground.tia.

asif123456789 · 02-01-2009, 05:43

http://rapidshare.com/files/19231681...09022.jpg.html
hear your pionouts dear chack this

dinsky2030 · 02-01-2009, 07:00

Quote:

Originally Posted by asif123456789

http://rapidshare.com/files/19231681...09022.jpg.html
hear your pionouts dear chack this

ok my friend i will try this but i tried already to check this using tester all is ground

SE-THAILAND · 02-01-2009, 07:09

did u try under IMEI stiker?

dinsky2030 · 02-01-2009, 08:05

Quote:

Originally Posted by srtech

did u try under IMEI stiker?

yes boss but nothing pin out

InfinityHelp · 02-01-2009, 11:45

hello!

If this phone is MT62xx MCU based- best & fastes way to find pinout is by measuring voltages.
Add battery power to battery terminals (check if battery is charged)
and now set one probe to some grounded part and with another touch one by one each test point.

memorise pins with voltage between 2,7-2,9volts.
those are tx/rx

asif123456789 · 02-03-2009, 16:45

no dear this is rx tx you trey ageen ar you contackt this( [email protected]) ok

02-01-2009, 05:37	#1 (permalink)
dinsky2030 Junior Member Join Date: May 2008 Posts: 12 Member: 770637 Status: Offline Thanks Meter: 0	5310 china phone need pin out good day to all please help me where is the rx and tx of this board,all coper point beside the battery terminal is ground.tia.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
hi...rh 30 5310 china phone need flashfile	livestrong	Chinese Models & Cloned Phones	2	11-21-2009 11:53
china phone collection... pin outs	igan ben	Chinese Models & Cloned Phones	3	04-28-2009 08:40
Need Pin Out China 5310	rashedmc	Chinese Models & Cloned Phones	9	12-04-2008 20:42
need pin out ztc china phone	d'odders	Chinese Models & Cloned Phones	0	11-05-2008 09:16
6300 china phone rm243 pin out please help	ailman_78	Infinity-Box	1	10-10-2008 16:32

02-01-2009, 05:43	#2 (permalink)
asif123456789 No Life Poster Join Date: May 2008 Location: bhakkar Age: 38 Posts: 976 Member: 770229 Status: Offline Sonork: 29050 Thanks Meter: 101	http://rapidshare.com/files/19231681...09022.jpg.html hear your pionouts dear chack this

02-01-2009, 07:09	#4 (permalink)
SE-THAILAND No Life Poster Join Date: Mar 2002 Location: khonkean,thailand Posts: 741 Member: 10084 Status: Offline Thanks Meter: 283	did u try under IMEI stiker?

02-01-2009, 11:45	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! If this phone is MT62xx MCU based- best & fastes way to find pinout is by measuring voltages. Add battery power to battery terminals (check if battery is charged) and now set one probe to some grounded part and with another touch one by one each test point. memorise pins with voltage between 2,7-2,9volts. those are tx/rx

02-03-2009, 16:45	#7 (permalink)
asif123456789 No Life Poster Join Date: May 2008 Location: bhakkar Age: 38 Posts: 976 Member: 770229 Status: Offline Sonork: 29050 Thanks Meter: 101	no dear this is rx tx you trey ageen ar you contackt this( [email protected]) ok