6120c Rm-217 No power Done By Infinity [New Pinout]
 

Tool's;
Infinity
Rj45 Pinout

Procedure;
1.Open Inifinity Shell.
2.Go to china phone Nokia/6300/click run Tab.
3.Connect RX,TX and GND to the Phone.
4.Go to Service Tab /click Format FFS[FFs;Complete] wait until finish
5.change Imei/Click write imei tab.

Image ang Log's;

Pinout's
http://farm4.static.flickr.com/3394/...4949a8.jpg?v=0

Formating;
http://farm4.static.flickr.com/3324/...e5b603.jpg?v=0

Log's;

Quote:

COM7 [VCP0] selected module v2.75 Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: "format ffs" ffs/eeprom backup enabled, it may takes several minutes ! Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6225:8A03:8A00]... CPU: MT6225 high speed boot On chip: 0001:C003:0003 boot packet size: 0400 Release Power button now ! Boot Done Initialize ... detecting chip #00 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb detecting chip #01 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb detecting chip #02 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb detecting chip #03 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb number of flash chip/regions detected: 04/01 Initialize Done Set baud ... 115200 Set baud Done Initialize bootcode ... Initialize bootcode Done Check firmware integrity ... device parameters autodetection in progress... detecting chip #00 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb detecting chip #01 in region #00... flash: EC257E25082501:18E59F00000000 flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5 number of flash chip/regions detected: 01/01 total flash region size: 01000000 detect device identification#1... detection phase #1... detect device identification#1 finished identification#1 structure: 2nd [enhanced] generation security area (code #1) is Ok security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.3E4560C5.[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN_E7632FFA].rpl ==================== New firmware detected (v.2.75, database date: 21.12.2009): JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN - make "Read full flash" operation - send "system_log_..." file to support: [email protected] - send flash backup files to support: [email protected] - include in your e-mail full text from phone back label (phone name etc.) ==================== identification#1 detection finished device-id: 3E4560C5 identification#1 protocol ver: 04 ver. sw 1: JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN ver. sw 2: MAUI.07A.W07.52.MP.V2, 05D09C18 ffs offset/size: 00E00000/00200000 detect device identification#2... detection phase #1... . detect device identification#2 finished detecting ffs/eeprom area in 1 chip(s)... standard ffs/eeprom offset detected: 00E00000 flash: EC257E25082501:18E59F00000000 checking area [00000000]: 00000000-00FFFFFF... ffs/eeprom found near: 00E00000 detecting ffs/eeprom size... ffs/eeprom size: 00200000 ffs/eeprom chip: 00 ffs/eeprom area: 00000000:00E00000-00FFFFFF Check firmware integrity Done Check firmware content ... Check firmware content Done Backup required data ... reading: eeprom[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN]... file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN]_20090124-112716.B0E.bin flash: EC257E25082501:18E59F00000000 Backup required data Done Patch required data ... Patch required data Done Special operation ... Special operation Done Write ... Write Done Finalization ... formatting... flash: EC257E25082501:18E59F00000000 Finalization Done file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_3E4560C5_JIA6120_ONE_PCB01_GPRS_MT6225_S 00.MAUI_07A_W07_52_MP_V2.BIN_E7632FFA_20090124-112738.B0X.bin Finished, time used: 278 sec Remove/Install battery now ! File system has been modified ! It is need to press and HOLD phone "Power" button during long time (up to 1 min) to make phone Powered-On !

Change Imei;
http://farm4.static.flickr.com/3415/...c0f654.jpg?v=0

Wella;
http://farm4.static.flickr.com/3428/...09c616.jpg?v=0



Eeprom Back-up is here; http://www.MegaShare.com/574552

hello mr. UnLoCkit!

please upload full flash dump readed from this phone.
we need it for our support area collection.
we have nothing to do with eeprom dump