6120c Rm-217 No power Done By Infinity [New Pinout]

[UnLoCkit]

6120c Rm-217 No power Done By infinity

Tool's;
Infinity
Rj45 Pinout

Procedure;
1.Open Inifinity Shell.
2.Go to china phone Nokia/6300/click run Tab.
3.Connect RX,TX and GND to the Phone.
4.Go to Service Tab /click Format FFS[FFs;Complete] wait until finish
5.change Imei/Click write imei tab.

Image ang Log's;

Pinout's


Formating;


Log's;

COM7 [VCP0] selected
module v2.75
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "format ffs"
ffs/eeprom backup enabled, it may takes several minutes !
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A03:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:C003:0003
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area (code #1) is Ok
security area (code #1) backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.3E4560C5.[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN_E7632FFA].rpl
====================
New firmware detected (v.2.75, database date: 21.12.2009):
JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN

- make "Read full flash" operation
- send "system_log_..." file to support: [email protected]
- send flash backup files to support: [email protected]
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 3E4560C5
identification#1 protocol ver: 04
ver. sw 1: JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN
ver. sw 2: MAUI.07A.W07.52.MP.V2, 05D09C18
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
detect device identification#2 finished
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[JIA6120_ONE_PCB01_GPRS_MT6225_S00.MAUI_07A_W07_52_ MP_V2.BIN]_20090124-112716.B0E.bin
flash: EC257E25082501:18E59F00000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Write Done
Finalization ...
formatting...
flash: EC257E25082501:18E59F00000000
Finalization Done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_3E4560C5_JIA6120_ONE_PCB01_GPRS_MT6225_S 00.MAUI_07A_W07_52_MP_V2.BIN_E7632FFA_20090124-112738.B0X.bin
Finished, time used: 278 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Change Imei;


Wella;




Eeprom Back-up is here; http://www.MegaShare.com/574552

[InfinityHelp]

hello mr. UnLoCkit!

please upload full flash dump readed from this phone.
we need it for our support area collection.
we have nothing to do with eeprom dump