about nand ic - GSM-Forum

GsmBaguio · 03-31-2016, 02:24

why this not fully supported

CPU: MT6571 SW:0000 Ver: CA00
Downloading Boot11 ...
Nand Flash Type: Nand_NEW_007B
Nand Flash Code: 00EC00BC(00000066)
Nand Flash Size: 0x20000000 Hex Bytes

BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done Erased phone or unsupported FlashIc?
You can change settings : Settings -> Other -> NAND init Mode

alimobile279 · 03-31-2016, 06:48

nand is not spoted cm2 and any other boxes ..

jaddah · 03-31-2016, 06:55

In tab "setting" You can change one by one ==>> Settings -> Other -> NAND init Mode

Quote:

Originally Posted by GsmBaguio

why this not fully supported

CPU: MT6571 SW:0000 Ver: CA00
Downloading Boot11 ...
Nand Flash Type: Nand_NEW_007B
Nand Flash Code: 00EC00BC(00000066)
Nand Flash Size: 0x20000000 Hex Bytes

BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Info read not done Erased phone or unsupported FlashIc?
You can change settings : Settings -> Other -> NAND init Mode

GsmBaguio · 03-31-2016, 10:52

Settings -> Other -> NAND init Mode
CAN YOU GIVE ME SCREENSHOT?

jawad_anis · 03-31-2016, 12:14

u can read factory file from cm2 but for write flash u need sptool flasher

GsmBaguio · 04-01-2016, 08:23

nazeerkhan0369 · 04-03-2016, 13:59

this is internel memory problem

03-31-2016, 02:24	#1 (permalink)
GsmBaguio No Life Poster Join Date: Feb 2010 Location: Pinas Posts: 1,096 Member: 1243303 Status: Offline Sonork: 1591167 Thanks Meter: 514	about nand ic why this not fully supported CPU: MT6571 SW:0000 Ver: CA00 Downloading Boot11 ... Nand Flash Type: Nand_NEW_007B Nand Flash Code: 00EC00BC(00000066) Nand Flash Size: 0x20000000 Hex Bytes BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Info read not done Erased phone or unsupported FlashIc? You can change settings : Settings -> Other -> NAND init Mode

03-31-2016, 06:48	#2 (permalink)
alimobile279 No Life Poster Join Date: Mar 2011 Location: Faisalabad Posts: 1,482 Member: 1527968 Status: Offline Sonork: 100.1651182 Thanks Meter: 483	nand is not spoted cm2 and any other boxes ..

03-31-2016, 10:52	#4 (permalink)
GsmBaguio No Life Poster Join Date: Feb 2010 Location: Pinas Posts: 1,096 Member: 1243303 Status: Offline Sonork: 1591167 Thanks Meter: 514	Settings -> Other -> NAND init Mode CAN YOU GIVE ME SCREENSHOT?

03-31-2016, 12:14	#5 (permalink)
jawad_anis Registered User Join Date: Mar 2008 Location: karachi Posts: 1,569 Member: 726546 Status: Offline Sonork: 100.1578784 Thanks Meter: 555	u can read factory file from cm2 but for write flash u need sptool flasher

04-01-2016, 08:23	#6 (permalink)
GsmBaguio No Life Poster Join Date: Feb 2010 Location: Pinas Posts: 1,096 Member: 1243303 Status: Offline Sonork: 1591167 Thanks Meter: 514

04-03-2016, 13:59	#7 (permalink)
nazeerkhan0369 Freak Poster Join Date: Jun 2015 Location: karachi Posts: 147 Member: 2404243 Status: Offline Sonork: 100.192.168.1 Thanks Meter: 39	this is internel memory problem