Acer B3-A30 FRP Reset with CM2MTK (MT8163) - GSM-Forum

xukca · 10-12-2017, 16:07

Hello, friends! Is it possible to remove frp of Acer B3-A30 MT8163 Tablet with Chinese Miracle 2 MTK. I tried connecting the tablet while holding different key combinations but i get two different errors:
[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
and:
[DA_ERROR] : DRAM Configure failed!
I reckon that i should unlock the bootloader but its not possible via fastboot option

. Any ideas? Thank you in advance!!!

yuranc8 · 10-12-2017, 18:20

Thanks for success report

continue like this

JayDi · 10-13-2017, 06:51

Post complete log. Not just pieces of it.

xukca · 10-13-2017, 08:27

Sorry for that guys. Here are they:
Card found : S/N : ******* , v0136
Chinese Miracle II [MTK module] v 1.58

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 48 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!

and the other one:

Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 49 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x97
NAND Flash : NOT INSTALLED
eMMC Flash : 450100445332303332013191597843A3
Initialize Memory ...

[DA_ERROR] : DRAM Configure failed!
ErroCode : 0xBC000000
DRAM_INIT_REQ_FAILED
Boot Error!

Operation Failed
Elapsed: 00:00:08
Reconnect Power/Cable!

Thank you!

Hynes57 · 12-04-2017, 14:21

think i have found solution

soulgsm · 12-21-2018, 14:05

========================= Start =========================
21.12.2018 / 14:27:25
================================================== =======
Card found : S/N : **********, v0137
Chinese Miracle II [MTK module] v 1.58

Start at : [21.12.2018 / 14:28:40]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:27
Reconnect Power/Cable!

Finish at : [21.12.2018 / 14:29:08]

Start at : [21.12.2018 / 14:30:23]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:23
Reconnect Power/Cable!

Finish at : [21.12.2018 / 14:30:47]

Start at : [21.12.2018 / 14:32:30]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!

Finish at : [21.12.2018 / 14:32:55]

========================= Start =========================
21.12.2018 / 14:37:58
================================================== =======
Card found : S/N : FB797589 , v0137
Chinese Miracle II [MTK module] v 1.58

Start at : [21.12.2018 / 14:38:31]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:20
Reconnect Power/Cable!

Finish at : [21.12.2018 / 14:38:51]

========================= Start =========================
21.12.2018 / 14:40:31
================================================== =======
Card found : S/N : FB797589 , v0137
Chinese Miracle II [MTK module] v 1.58

Start at : [21.12.2018 / 14:40:51]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
========================= Start =========================
21.12.2018 / 14:47:44
================================================== =======
Card found : S/N : FB797589 , v0137
Chinese Miracle II [MTK module] v 1.58

Start at : [21.12.2018 / 14:48:03]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:10
Reconnect Power/Cable!

Finish at : [21.12.2018 / 14:48:14]

========================= Start =========================
21.12.2018 / 15:01:25
================================================== =======
Card found : S/N : FB797589 , v0137
Chinese Miracle II [MTK module] v 1.58

Start at : [21.12.2018 / 15:02:14]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Brom Init not done
Boot Error!

Operation Failed
Elapsed: 00:00:00
Reconnect Power/Cable!

Finish at : [21.12.2018 / 15:02:15]

Start at : [21.12.2018 / 15:02:41]
Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:09
Reconnect Power/Cable!

Finish at : [21.12.2018 / 15:02:51]

Start at : [21.12.2018 / 15:03:02]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 12 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 8163
BB_CPU_NME : [MediaTek] MT8163_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:24
Reconnect Power/Cable!

Finish at : [21.12.2018 / 15:03:26]

YellowBoss · 12-22-2018, 10:43

@soulgsm
you are using CM2MTK v1.58, but you can try with CM2MT2 v2.xx

soulgsm · 12-22-2018, 10:45

Problem solved without the box but i apreciate the info verry much ! Thank you again!

dragosgsm · 01-13-2019, 20:39

Quote:

Originally Posted by YellowBoss

@soulgsm
you are using CM2MTK v1.58, but you can try with CM2MT2 v2.xx

I also need to remove FRP on this tablet based on MT8163 Surftab Theatre L15 - TREKSTOR - DEINE TECHNIK

Operation : Reset Settings/Format FS [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM838)
MODE : BOOTROM
PORT : 838
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

10-12-2017, 16:07	#1 (permalink)
xukca Freak Poster Join Date: Oct 2010 Location: Europe Posts: 407 Member: 1429766 Status: Offline Thanks Meter: 85	Acer B3-A30 FRP Reset with CM2MTK (MT8163) Hello, friends! Is it possible to remove frp of Acer B3-A30 MT8163 Tablet with Chinese Miracle 2 MTK. I tried connecting the tablet while holding different key combinations but i get two different errors: [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED and: [DA_ERROR] : DRAM Configure failed! I reckon that i should unlock the bootloader but its not possible via fastboot option . Any ideas? Thank you in advance!!!

12-21-2018, 14:05	#6 (permalink)
soulgsm Freak Poster Join Date: Jan 2013 Location: RUSSIA Posts: 333 Member: 1872225 Status: Offline Sonork: 100.1668729 Thanks Meter: 32	post it pls ========================= Start ========================= 21.12.2018 / 14:27:25 ================================================== ======= Card found : S/N : **********, v0137 Chinese Miracle II [MTK module] v 1.58 Start at : [21.12.2018 / 14:28:40] Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Device boot not done Check Drivers Try again Boot Error! Operation Failed Elapsed: 00:00:27 Reconnect Power/Cable! Finish at : [21.12.2018 / 14:29:08] Start at : [21.12.2018 / 14:30:23] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:23 Reconnect Power/Cable! Finish at : [21.12.2018 / 14:30:47] Start at : [21.12.2018 / 14:32:30] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:24 Reconnect Power/Cable! Finish at : [21.12.2018 / 14:32:55] ========================= Start ========================= 21.12.2018 / 14:37:58 ================================================== ======= Card found : S/N : FB797589 , v0137 Chinese Miracle II [MTK module] v 1.58 Start at : [21.12.2018 / 14:38:31] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:20 Reconnect Power/Cable! Finish at : [21.12.2018 / 14:38:51] ========================= Start ========================= 21.12.2018 / 14:40:31 ================================================== ======= Card found : S/N : FB797589 , v0137 Chinese Miracle II [MTK module] v 1.58 Start at : [21.12.2018 / 14:40:51] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed ========================= Start ========================= 21.12.2018 / 14:47:44 ================================================== ======= Card found : S/N : FB797589 , v0137 Chinese Miracle II [MTK module] v 1.58 Start at : [21.12.2018 / 14:48:03] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:10 Reconnect Power/Cable! Finish at : [21.12.2018 / 14:48:14] ========================= Start ========================= 21.12.2018 / 15:01:25 ================================================== ======= Card found : S/N : FB797589 , v0137 Chinese Miracle II [MTK module] v 1.58 Start at : [21.12.2018 / 15:02:14] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Brom Init not done Boot Error! Operation Failed Elapsed: 00:00:00 Reconnect Power/Cable! Finish at : [21.12.2018 / 15:02:15] Start at : [21.12.2018 / 15:02:41] Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:09 Reconnect Power/Cable! Finish at : [21.12.2018 / 15:02:51] Start at : [21.12.2018 / 15:03:02] Operation : Check / Read Info [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 12 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:24 Reconnect Power/Cable! Finish at : [21.12.2018 / 15:03:26]

12-22-2018, 10:45	#8 (permalink)
soulgsm Freak Poster Join Date: Jan 2013 Location: RUSSIA Posts: 333 Member: 1872225 Status: Offline Sonork: 100.1668729 Thanks Meter: 32	Thx Problem solved without the box but i apreciate the info verry much ! Thank you again!

10-12-2017, 18:20	#2 (permalink)
yuranc8 No Life Poster Join Date: Feb 2017 Location: Quelimane Mz Age: 26 Posts: 2,210 Member: 2680008 Status: Offline Thanks Meter: 1,640	Thanks for success report continue like this

10-13-2017, 06:51	#3 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Post complete log. Not just pieces of it.

10-13-2017, 08:27	#4 (permalink)
xukca Freak Poster Join Date: Oct 2010 Location: Europe Posts: 407 Member: 1429766 Status: Offline Thanks Meter: 85	Sorry for that guys. Here are they: Card found : S/N : ******* , v0136 Chinese Miracle II [MTK module] v 1.58 Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 48 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x00FF BLVersion : 0x0001 PreLoader : Active [ Boot with PL ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... [DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED Boot Error! Operation Failed Elapsed: 00:00:07 Reconnect Power/Cable! and the other one: Operation : Format FileSystem [ v1.58 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 49 ] Sync... Inital Boot Ok! BB_CPU_PID : 8163 BB_CPU_NME : [MediaTek] MT8163_S00 BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000 Processing BROM stage Settings for BROM configured! SecCfgVal : 0x01000000 BromVer : 0x0005 BLVersion : 0x00FE PreLoader : NOT Active [ Erased ] BootLdrSS : SIGNED with SPRELOADER Processing DA stage DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07 Sending and initialize DA ... Running DA ver.4.2 on BBID : 0x97 NAND Flash : NOT INSTALLED eMMC Flash : 450100445332303332013191597843A3 Initialize Memory ... [DA_ERROR] : DRAM Configure failed! ErroCode : 0xBC000000 DRAM_INIT_REQ_FAILED Boot Error! Operation Failed Elapsed: 00:00:08 Reconnect Power/Cable! Thank you!

12-04-2017, 14:21	#5 (permalink)
Hynes57 Junior Member Join Date: Sep 2016 Posts: 24 Member: 2627440 Status: Offline Thanks Meter: 5	think i have found solution

12-22-2018, 10:43	#7 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	@soulgsm you are using CM2MTK v1.58, but you can try with CM2MT2 v2.xx