Alcatel E221 dead after flash!!
 

hi, all, i got a working E221 to flash, the phone has some problemes to open contacts, after suscesfully flash, the phone is dead, i reflash it withall vesrion in support area, but still dead ! onely the three red light, battry is fully charged

i used:

E221_firmware_U7CC_502
E221_lp_O10_600_En_Fr_De_It_Es

E221_firmware_U7CC_500
E221_lp_O40_600_En_Es_Galego_Euskera_Catala

E221_firmware_U7CC_502_Orange
E221_lp_08O_600_En_De_Pl_Cz_Slovensky
E221_repair_ffs_03_Orange

E221_firmware_U7CC_127
E221_lp_27O_905_En_Fr_It_xx_Ru
E221_repair_ffs_04

@infinitysupport, what's your advice to revive it?

Hello,

It's hard to say what may be wrong.
I suggest you to check phone hardware, f.e. rehot/reball flash chip and check water inside, due to if phone was hang at some operations before - it may be that it was problems with flash chip access.

the phone was working before flash, how can it be hardware!!! and about some errors i got, it's ùy cable problem, but you can see i sucsesfully flashed it many times after i fix my cable, but always phone dead!!!

Just an example "how": f.e. if phone flash chip had a defects or flash chip was bad soldered it may be that data was read incorrectly during normal phone operations (f.e. phonebook access).
Yes, I agree, it may be a software problem too, but if it's a software problem I do not see any reasons why phone can not power-on after flashing.

hi!

i have e221 problem full memory and some features can't open
after full flash the phone is dead... i use all flash file in support but still phone is dead only red light on the back.
please help infinity team.. how can i revived it again.

till now, no solution can revive it, cause like infinitysupport said, it seams that it's flas ic(hw) problem.
br

Hello, I have the same problem. After flash phone is dead. The phone was working before flash

I have the same problem too. After flash phone is dead. The phone was working before flash , only the phone can't open contacts
I sent my full flash to Infinity support but no action was given to me.

yes same here problem.. after flashing to change language unit becomes dead...

i have tried every possible combination of flashfiles in your support but still flashing sucessfull but still unit is no power...

br
freddy
gsmph

i had faced same problem and Fixed with FG.
use E221X-2DRGRO1_FULL.





Br (:
UMER

mepd problem if you repair it your phone will be alive....

try 1.37 version. On 1.38 version 100% error for e221