Alcatel OT S320 can't boot - GSM-Forum

said4 · 12-22-2008, 13:10

Hi,ALL
I have OT S320 to unlock but can't boot.
batt full charge
cable ok
I have tryed use all variant for connecting problem as Motorola in doc manual
No resultat.
Please help.
my box works very well.
help please.

nasirkhan007 · 12-22-2008, 14:07

Unlock By Tp Mathod .......

**InfinitySupport** · 12-22-2008, 16:11

Quote:

Originally Posted by said4

Hi,ALL
I have OT S320 to unlock but can't boot.
batt full charge
cable ok
I have tryed use all variant for connecting problem as Motorola in doc manual
No resultat.
Please help.
my box works very well.
help please.

Hello,

You need to double check cable.
If you can not connect via phone connector it may be that you need to solder wires to test-points under battery.

maplegsm · 12-22-2008, 17:02

if u have KG195 cable just open it and swap RX TX

BR

MapleGsm(Umer)

said4 · 12-22-2008, 18:25

Thanks for reply
I use TP method and I know how to solder it but for me not boot.
It's as C701 TP.

**InfinitySupport** · 12-22-2008, 19:09

Hello,

Please, double check your cable, I don't see any other reason why phone can not boot.

said4 · 12-22-2008, 19:17

At last Phone unlocked
I use FG Box to connect phone and voila working.
what you advice us about?

Direct to InfinityBox not working
with Pinfinder not working too

COM4 [VCP1] selected
module v2.52
Device: Alcatel-OT-S320X
Checking data, wait...
advanced flash detection enabled
Action: write NOR flash
"smart write" active
"format ffs" active
write: Firmware
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
error: boot initialization step #2 failed:
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:3192:A00C
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: 98004900000002:2AEA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 05
ver. sw 1: JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36_SP 1_V20.BIN
ver. sw 2: MAUI.07A.W07.36.SP1.V20, 00000000
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1...
detect device identification#2 finished
sim-lock status: enabled
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og__JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_3 6_SP1_V20.BIN_FFFFFFFF_20081222-204948.B0X.bin
Area: Firmware
flash: 98004900000002:2AEA0000000000
Write: Firmware
detect device identification#2...
detection phase #1...
detect device identification#2 finished
security area (code #3, part #2) calculation...
customization: CH16BM13
done
flash: 98004900000002:2AEA0000000000
flash: 98004900000002:2AEA0000000000
Write: security area (code #3, part #2)
security area (code #3, part #2) calculation done
security area (code #3, part #1) calculation...
use default security area (code #3, part #1) pattern
..................done
flash: 98004900000002:2AEA0000000000
flash: 98004900000002:2AEA0000000000
Write: security area (code #3, part #1)
security area (code #3, part #1) calculation done
Write Done
Finalization ...
formatting...
flash: 98004900000002:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og__JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_3 6_SP1_V20.BIN_FFFFFFFF_20081222-205849.B0X.bin
Finished, time used: 558 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

**InfinitySupport** · 12-22-2008, 20:31

Hello,

Please, check box with other phones in future, probably there is some problems with RJ45 socket or something like this.

12-22-2008, 13:10	#1 (permalink)
said4 No Life Poster Join Date: Feb 2006 Location: Madagascar Posts: 2,848 Member: 233142 Status: Offline Sonork: 100.1595099 Thanks Meter: 527	Alcatel OT S320 can't boot Hi,ALL I have OT S320 to unlock but can't boot. batt full charge cable ok I have tryed use all variant for connecting problem as Motorola in doc manual No resultat. Please help. my box works very well. help please.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alcatel OT-S320 can infinity support it	nzeiga	Infinity-Box	32	07-25-2010 18:40
alcatel ot-s320 and ot-600 product password	MGT SOFTWARE	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	6	01-10-2010 08:34
Alcatel OT S320 ?	Unlocker AL	Alcatel TCL Phones and New Models	2	09-26-2008 10:28
Can unlock Alcatel OT S320 Easy unlocker?	Matrix rev	Easy-Unlocker	0	09-25-2008 15:38

12-22-2008, 14:07	#2 (permalink)
nasirkhan007 No Life Poster Join Date: Jul 2007 Location: (¯`». Catch Me If U Can .«´¯) Age: 35 Posts: 6,956 Member: 553445 Status: Offline Sonork: 100.1585581 Thanks Meter: 8,184	Unlock By Tp Mathod .......

12-22-2008, 17:02	#4 (permalink)
maplegsm No Life Poster Join Date: Nov 2006 Location: Bulgaria/China Age: 58 Posts: 4,312 Member: 391664 Status: Offline Sonork: Python Thanks Meter: 1,063	if u have KG195 cable just open it and swap RX TX BR MapleGsm(Umer)

12-22-2008, 18:25	#5 (permalink)
said4 No Life Poster Join Date: Feb 2006 Location: Madagascar Posts: 2,848 Member: 233142 Status: Offline Sonork: 100.1595099 Thanks Meter: 527	Thanks for reply I use TP method and I know how to solder it but for me not boot. It's as C701 TP.

12-22-2008, 19:09	#6 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, double check your cable, I don't see any other reason why phone can not boot.

12-22-2008, 19:17	#7 (permalink)
said4 No Life Poster Join Date: Feb 2006 Location: Madagascar Posts: 2,848 Member: 233142 Status: Offline Sonork: 100.1595099 Thanks Meter: 527	At last Phone unlocked I use FG Box to connect phone and voila working. what you advice us about? Direct to InfinityBox not working with Pinfinder not working too COM4 [VCP1] selected module v2.52 Device: Alcatel-OT-S320X Checking data, wait... advanced flash detection enabled Action: write NOR flash "smart write" active "format ffs" active write: Firmware skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs Boot ... Press and HOLD Power button now ! error: boot initialization step #2 failed: 19200 fixed Connecting, wait... Initializing [6223:8A05:8A00]... CPU: MT6223 chip: 0011:3192:A00C boot packet size: 0400 Release Power button now ! Boot Done Initialize ... detecting chip #00 in region #00... flash: 98004900000002:2AEA0000000000 flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb number of flash chip/regions detected: 01/01 Initialize Done Set baud ... 460800 Set baud Done Initialize bootcode ... Initialize bootcode Done Check firmware integrity ... detect device identification#1... detection phase #1... detect device identification#1 finished identification#1 structure: 2nd [standard] generation identification#1 protocol ver: 05 ver. sw 1: JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_36_SP 1_V20.BIN ver. sw 2: MAUI.07A.W07.36.SP1.V20, 00000000 ffs offset/size: 00C00000/00400000 detect device identification#2... detection phase #1... detect device identification#2 finished sim-lock status: enabled Check firmware integrity Done Check firmware content ... Check firmware content Done Backup required data ... Backup required data Done Patch required data ... Patch required data Done Special operation ... Special operation Done Write ... file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og__JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_3 6_SP1_V20.BIN_FFFFFFFF_20081222-204948.B0X.bin Area: Firmware flash: 98004900000002:2AEA0000000000 Write: Firmware detect device identification#2... detection phase #1... detect device identification#2 finished security area (code #3, part #2) calculation... customization: CH16BM13 done flash: 98004900000002:2AEA0000000000 flash: 98004900000002:2AEA0000000000 Write: security area (code #3, part #2) security area (code #3, part #2) calculation done security area (code #3, part #1) calculation... use default security area (code #3, part #1) pattern ..................done flash: 98004900000002:2AEA0000000000 flash: 98004900000002:2AEA0000000000 Write: security area (code #3, part #1) security area (code #3, part #1) calculation done Write Done Finalization ... formatting... flash: 98004900000002:2AEA0000000000 Finalization Done file saved: C:\Program Files\InfinityBox\MModule\backup_security\system_l og__JRD23_07A_PCB01_GPRS_MT6223_S00.MAUI_07A_W07_3 6_SP1_V20.BIN_FFFFFFFF_20081222-205849.B0X.bin Finished, time used: 558 sec Remove/Install battery now ! File system has been modified ! It is need to press and HOLD phone "Power" button during long time (up to 1 min) to make phone Powered-On !

12-22-2008, 20:31	#8 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, Please, check box with other phones in future, probably there is some problems with RJ45 socket or something like this.