always error when backup firmware advance e1c pro - GSM-Forum

titan_mael · 01-21-2015, 12:56

Start at : [1/19/2015 / 6:40:29 PM]
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D443352011337B83A916B
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D443352011337B83A916B
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : ADVAN
ProdName : Vandroid
ProdModel : E1C Pro
Device : Vandroid
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1.13

[Read Ok] : preloader_advan12d_7123.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
#4655 : Data CRC Error : 30CD , 731F
Error while reading block! Something went wrong

Read error

Operation Failed
Elapsed: 00:01:25
Reconnect Power/Cable!

change cable, usb port ,change setting...still error ..

Dzirt · 01-21-2015, 14:23

Hello. It always give exactly same error? Can you try 2 times in a row and post both logs?
If they will be same - seems as emmc have bad block in this sector. I can make skip for this, but result can be - bad firmware.

And if try read fullflash instead fw - it reads well or not?

titan_mael · 01-22-2015, 14:05

Quote:

Originally Posted by Dzirt

Hello. It always give exactly same error? Can you try 2 times in a row and post both logs?
If they will be same - seems as emmc have bad block in this sector. I can make skip for this, but result can be - bad firmware.

And if try read fullflash instead fw - it reads well or not?

I've tried several times, sometimes errors in 15 percent, sometimes 20 per cent .. I try other brands ( local brand ) ,such like Mito...similar error occured.. but I've tried backup firmware samsung clone working ..

Dzirt · 01-22-2015, 14:37

Aha. Charge battery and try use other PC for test.

01-21-2015, 12:56	#1 (permalink)
titan_mael Insane Poster Join Date: Dec 2005 Location: Alien Nation Posts: 89 Member: 210581 Status: Offline Thanks Meter: 25	always error when backup firmware advance e1c pro Start at : [1/19/2015 / 6:40:29 PM] Operation : Read Flash [ v1.09 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 42 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6571 BB_CPU_HW : CA00 BB_CPU_SW : 8D00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6571_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending NAND_ID : 00000000000000000000000000000000 eMMC_ID : 15010034594D443352011337B83A916B DA Stat : v4.2 on BBID : 0x8B DA Sent. Configure setting now ... eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0015 , OEM : 0100 [eMMC] : FLASH_INF : R3DMY [eMMC] : FLASH_CID : 15010034594D443352011337B83A916B [eMMC] : FLASH_LEN : 0x00000000E9000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Brand : ADVAN ProdName : Vandroid ProdModel : E1C Pro Device : Vandroid AndroidVer: 4.4.2 MTKxCPU : MT6571 MTKxPRJ : ALPS.KK1.MP7.V1.13 [Read Ok] : preloader_advan12d_7123.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin #4655 : Data CRC Error : 30CD , 731F Error while reading block! Something went wrong Read error Operation Failed Elapsed: 00:01:25 Reconnect Power/Cable! change cable, usb port ,change setting...still error ..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-21-2015, 14:23	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. It always give exactly same error? Can you try 2 times in a row and post both logs? If they will be same - seems as emmc have bad block in this sector. I can make skip for this, but result can be - bad firmware. And if try read fullflash instead fw - it reads well or not?

01-22-2015, 14:37	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Aha. Charge battery and try use other PC for test.