Anycool D68 and chinese Miracle - GSM-Forum

carlito79 · 12-29-2008, 20:31

Hello Infinity
i have some Anycool D68 for flash with new Language. I check the Pins with Pinfinder, after some seconds Pinfinder finds the Pin and i Set the Pins.
19200 fixed
CPU: MT6225
result: Rx:13 Tx:11
time required: 86 sec

After Start Chinese Miracle i will read Fullflash. I press and Hold Power Button, but no reaction ? Why is this so?
With Anycool F818 all works fine with the same procedere..has someoa of this board an idea what i can do?
Thanks all and best regards from Switzerland
Carlito79

InfinityHelp · 12-29-2008, 23:23

Hello!

do you able to read out "general phone information" on powered On phone?

carlito79 · 12-30-2008, 14:38

Hello
Read general Infos not Possible...
With Phone Watch M810 same Problem..detect Pins is ok, but all other
goes wrong..

InfinityHelp · 12-30-2008, 18:49

hello!

are you sure that you select correct com port in Chinese Miracle module?

carlito79 · 02-13-2009, 06:11

all ok. was voltage problem. i have fixed.
thanks

carlito79 · 02-17-2009, 16:25

Quote:

Originally Posted by carlito79

Hello Infinity
i have some Anycool D68 for flash with new Language. I check the Pins with Pinfinder, after some seconds Pinfinder finds the Pin and i Set the Pins.
19200 fixed
CPU: MT6225
result: Rx:13 Tx:11
time required: 86 sec

After Start Chinese Miracle i will read Fullflash. I press and Hold Power Button, but no reaction ? Why is this so?
With Anycool F818 all works fine with the same procedere..has someoa of this board an idea what i can do?
Thanks all and best regards from Switzerland

Carlito79

www.anycool.ch my site in switzerland

12-29-2008, 20:31	#1 (permalink)
carlito79 Junior Member Join Date: Apr 2008 Posts: 10 Member: 742012 Status: Offline Thanks Meter: 1	Anycool D68 and chinese Miracle Hello Infinity i have some Anycool D68 for flash with new Language. I check the Pins with Pinfinder, after some seconds Pinfinder finds the Pin and i Set the Pins. 19200 fixed CPU: MT6225 result: Rx:13 Tx:11 time required: 86 sec After Start Chinese Miracle i will read Fullflash. I press and Hold Power Button, but no reaction ? Why is this so? With Anycool F818 all works fine with the same procedere..has someoa of this board an idea what i can do? Thanks all and best regards from Switzerland Carlito79

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
i facing some problem in infinity updates chinese miracle and spice	fareedkhan	Infinity-Box	6	07-18-2011 22:10
anycool d58+ and Anycool-f58 flash file need	turkcellgsm	Chinese Models & Cloned Phones	0	05-23-2009 13:36
Not Added Chinese miracle 2 weeek And phones dead	Exorcist	Infinity-Box	5	03-13-2009 01:07
Anycool D68 Bad Voice Quality, need help	carlito79	Chinese Models & Cloned Phones	0	02-11-2009 16:05
Free download flashtool and flash file CHINESE MIRACLE !	ticoichip	GSM Mobile Links	0	06-06-2007 04:16

12-29-2008, 23:23	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Hello! do you able to read out "general phone information" on powered On phone?

12-30-2008, 14:38	#3 (permalink)
carlito79 Junior Member Join Date: Apr 2008 Posts: 10 Member: 742012 Status: Offline Thanks Meter: 1	Hello Read general Infos not Possible... With Phone Watch M810 same Problem..detect Pins is ok, but all other goes wrong..

12-30-2008, 18:49	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! are you sure that you select correct com port in Chinese Miracle module?

02-13-2009, 06:11	#5 (permalink)
carlito79 Junior Member Join Date: Apr 2008 Posts: 10 Member: 742012 Status: Offline Thanks Meter: 1	all ok. was voltage problem. i have fixed. thanks