GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 02-24-2011, 12:16   #1 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
AnyCool NOR 6205-6239 read flash problem


I Read full flash and firmware with Page .
but after that Language Package Editor dont find any language

When I try to read full flash or firmware with Boot autodetect autoselect on/off and Page + Spare . I have log:

COM5 [VCP0] selected
module v3.26
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: read flash
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
boot packet size: 0400
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 32 sec
Remove/Install battery now !


any solution to read firmware with language to change it ?
  Reply With Quote
The Following User Says Thank You to konaku For This Useful Post:
Old 02-24-2011, 20:19   #2 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
It`s possible to read fullflash with infinity ?
  Reply With Quote
Old 02-24-2011, 21:37   #3 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 24,800
Member: 148515
Status: Offline
Thanks Meter: 14,733
hello!

you must select NAND CPU type, page+spare
  Reply With Quote
Old 02-26-2011, 09:36   #4 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
Quote:
Originally Posted by InfinityHelp View Post
hello!

you must select NAND CPU type, page+spare

NOW I HAVE :

COM5 [VCP0] selected
module v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
AnyCool 72% PL editor_corrected_AnyCool to polish 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01__firmware_20110225-193341.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (460800)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: ZZT.3180WP04.5.5T10D100930_MB01
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: 3180_BOOTLOADER_V005_MT6235B_ZZT_3180WP04_5_5T10D1 00930_MB01.bin
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN
project-id: ZZT.3180WP04.5.5T10D100930_MB01, 9CED6B5D
code offset: 00000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._3180 _PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D100930 _MB01.BIN_5D6BED9C_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP 04_5_5T10D100930_MB01.BIN_5D6BED9C_.rpl
====================
warning: unknown firmware: 3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN_5D6BED9C
Unknown firmware found (v.3.26, database date: 13.01.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
3180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D10 0930_MB01.BIN
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
write core...
Disconnect...
done
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\3 180_PCB01_GPRS_MT6235B_S01.ZZT_3180WP04_5_5T10D100 930_MB01__system_log_20110225-204602.B4X.bin
Finished, time used: 15 min 25 sec
Remove/Install battery now !


now phone not power on,
format safe FFS dont change power on problem
how to write correctly this firmware and have full working phone ?
  Reply With Quote
Old 02-26-2011, 12:27   #5 (permalink)
Junior Member
 
Join Date: May 2008
Posts: 7
Member: 764950
Status: Offline
Thanks Meter: 0
i have same problem

i have a same problem with x7 iphone clone mt6235....
here is the log

COM9 [VCP1] selected
module v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E__fullflash_2011022 6-194930.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
converting data...
done 0x07C1F200 bytes
bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin
nfi area detection (3 cores) finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0018]: 00AD:007900A50000 [HYNIX] HY27XA081G1M
chip size: 128Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 03400000/04C00000
firmware size: 52Mb
ffs size: 76Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: X7_101213_V1.4_QC_SET_FOR10
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is invalid
startup code area #1 detection done
rom info ver: 07
sw version: V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E
project-id: X7_101213_V1.4_QC_SET_FOR10, 71F9FB49
code offset: 00000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
nfi area detection...
converting data...
done 0x07C1F200 bytes
bootloader version: V101_BOOTLOADER_V005_MT6235B_X7_101213_V1_4_QC_SET _FOR10.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\id.00006235._V101 _PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_FOR1 0.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971_.rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235.[V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971].rpl
rpl file not found: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.00006235._V101_PCB01_GPRS_MT6235B_S01.X7_101213_ V1_4_QC_SET_FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF9 71_.rpl
====================
warning: unknown firmware: V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E_49FBF971
Unknown firmware found (v.3.26, database date: 13.01.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
V101_PCB01_GPRS_MT6235B_S01.X7_101213_V1_4_QC_SET_ FOR10.BIN_FLNHYG0UGG0MF1P_5SH0E
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
warning: can not format: HW_STORAGE_NOR is not present
Format...
Disconnect...
done
Finished, time used: 16 min 16 sec
Remove/Install battery now !


please help
  Reply With Quote
Old 02-26-2011, 15:18   #6 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 24,800
Member: 148515
Status: Offline
Thanks Meter: 14,733
hello!

what happen if you write original (not translated) backup?
  Reply With Quote
Old 02-27-2011, 06:55   #7 (permalink)
Junior Member
 
Join Date: May 2008
Posts: 7
Member: 764950
Status: Offline
Thanks Meter: 0
no..my one is original...backuped from working phone
  Reply With Quote
Old 02-27-2011, 07:05   #8 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 26,122
Member: 1043909
Status: Offline
Thanks Meter: 51,271
@ays_babes2
send original flash backup files to [email protected] and in 1 day you will be able to flash your phones
  Reply With Quote
Old 02-27-2011, 21:34   #9 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 24,800
Member: 148515
Status: Offline
Thanks Meter: 14,733
hello!

what happen if you write t as "firmware"?
  Reply With Quote
Old 03-01-2011, 03:08   #10 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
Quote:
Originally Posted by InfinityHelp View Post
hello!

what happen if you write t as "firmware"?
27-02-2011 I send to you , To: <[email protected]>
flash file,
Did you check this firmware ?
  Reply With Quote
Old 03-01-2011, 16:26   #11 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 24,800
Member: 148515
Status: Offline
Thanks Meter: 14,733
hello!

i just checked our email dated 27th.
no mail with version V101...
can you upload it to rapidshare.com and post link here?
  Reply With Quote
Old 03-01-2011, 19:16   #12 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
Quote:
Originally Posted by InfinityHelp View Post
hello!

i just checked our email dated 27th.
no mail with version V101...
can you upload it to rapidshare.com and post link here?
If thisi is the best way for you , so there is a link to rapidshare

http://rapidshare.com/files/45045840...ware_20110225-

best regards
  Reply With Quote
Old 03-01-2011, 21:59   #13 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,848
Member: 130995
Status: Offline
Thanks Meter: 34,290
@konaku
Are you sure that it's ORIGINAL file (from good working phone) ?
I can not extract required data from this file, I think that it's not original file, or file that was read from phone with VERY old ChineseMiracle software version
  Reply With Quote
Old 03-01-2011, 23:34   #14 (permalink)
LA4
Major Poster
 
Join Date: Jul 2001
Posts: 42
Member: 5288
Status: Offline
Thanks Meter: 0
take file and write by Flashtool. your phone will be restored
http://rapidshare.com/files/45049332...00930_MB01.rar
  Reply With Quote
Old 03-02-2011, 06:37   #15 (permalink)
Registered User
 
Join Date: Aug 2010
Posts: 497
Member: 1359163
Status: Offline
Thanks Meter: 35
Quote:
Originally Posted by InfinitySupport View Post
@konaku
Are you sure that it's ORIGINAL file (from good working phone) ?
I can not extract required data from this file, I think that it's not original file, or file that was read from phone with VERY old ChineseMiracle software version
This is another flashfile N8 , i have problem with Language Package and correctly
write flash to phone , when I change language to othere , and try to write it
I in new language I have many of squares rather than letters. So take a look at this firmware

http://rapidshare.com/files/45046797...D_BQ12__firmwa
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 10-14-2017 19:29
5110 flash new software , need help steve Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 4 01-03-2015 04:41
Eeprom reading KLImax Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 09-22-2011 15:55

 



All times are GMT +1. The time now is 04:39.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.45329 seconds with 8 queries

SEO by vBSEO